DPFF16D1J-F Film Capacitor Equivalent & Substitute Parts

Part Overview

The DPFF16D1J-F is a 1000 pF film capacitor manufactured by Cornell Dubilier Electronics (CDE), designed for high-pulse and DV/DT applications. This polypropylene metallized radial capacitor operates at 1600V DC and 500V AC, with an operating temperature range of -55°C to 105°C. The part is currently Active in product status with 1101 pieces in stock. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same manufacturer's product lines, enabling component procurement flexibility while preserving circuit performance.

Substiute Parts

DPFF16D1J-F

Cornell Dubilier Electronics (CDE)In Stock: 1197DPFF16D1J-F Datasheet

Current PartRFQ

715P102516LD3

Cornell Dubilier Electronics (CDE)In Stock: 1216715P102516LD3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DPFF16D1J-F is determined by strict equivalence in the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 1000 pF
• Tolerance: ±5%
• Voltage Rating - DC: 1600V (1.6kV)
• Voltage Rating - AC: 500V
• Dielectric Material: Polypropylene (PP), Metallized

Mechanical Compatibility Requirements:

• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 0.720" (18.30mm)
• Termination: PC Pins

Compliance Requirements:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The substitute part 715P102516LD3 meets all electrical and mechanical compatibility criteria. Dimensional variations in height and case diameter do not preclude substitution when lead spacing and termination type remain constant for through-hole PCB applications.

Parameter Comparison

Engineering Selection Recommendations

The 715P102516LD3 (Orange Drop® 715P series) is electrically and mechanically equivalent to the DPFF16D1J-F for applications requiring 1000 pF capacitance at 1600V DC and 500V AC ratings. Both parts are manufactured by Cornell Dubilier Electronics and maintain ROHS3 compliance and REACH unaffected status.

Selection Consideration: The DPFF16D1J-F supports an operating temperature range of -55°C to 105°C, while the 715P102516LD3 operates from -55°C to 85°C. For applications requiring sustained operation above 85°C, the DPFF16D1J-F is the appropriate selection. For applications within the -55°C to 85°C range, either part is suitable based on availability and procurement requirements.

Both parts are Active products with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the 715P102516LD3 be used as a direct replacement for the DPFF16D1J-F on a PCB?

A: Yes, for applications operating within -55°C to 85°C. Both parts have identical lead spacing (0.720"), termination type (PC Pins), and radial package configuration. PCB footprints designed for the DPFF16D1J-F will accommodate the 715P102516LD3 without modification.

Q: What is the primary difference between these two parts?

A: The operating temperature range differs. The DPFF16D1J-F operates to 105°C maximum, while the 715P102516LD3 operates to 85°C maximum. All electrical specifications (capacitance, voltage ratings, tolerance, dielectric material) are identical.

Q: Are there any dimensional concerns when substituting these parts?

A: The lead spacing and termination are identical. The 715P102516LD3 has a maximum seated height of 0.583" compared to 0.331" for the DPFF16D1J-F. Verify clearance in the application if height-constrained mounting space exists.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the DPFF16D1J-F and 715P102516LD3 are ROHS3 compliant and REACH unaffected, with identical ECCN (EAR99) and HTSUS (8532.25.0070) classifications.

Q: Which part should be selected for high-temperature applications?

A: The DPFF16D1J-F is required for applications requiring operation above 85°C, as it is rated to 105°C maximum. The 715P102516LD3 is limited to 85°C maximum operating temperature.