DOC102V-AT-010.0M Equivalent & Substitute Parts

Part Overview

The DOC102V-AT-010.0M is an oscillator manufactured by Connor Winfield. This part is classified as obsolete and is no longer in active production. The product has been superseded by newer alternatives within the manufacturer's product line. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing system maintenance and production requirements.

Substiute Parts

DOC102V-AT-010.0M

Connor WinfieldIn Stock: 1014DOC102V-AT-010.0M Datasheet

Current PartRFQ

DOCAT102V-AT-010.0M

Connor WinfieldIn Stock: 1210DOCAT102V-AT-010.0M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part DOCAT102V-AT-010.0M is identified as the manufacturer-recommended replacement for the obsolete DOC102V-AT-010.0M. The substitution is based on the following criteria:

Substitution Basis:

• Same manufacturer (Connor Winfield)
• Same base resonator type (Crystal)
• Same frequency specification (10 MHz)
• Same output standard (LVCMOS)
• Same supply voltage (3.3V)
• Active product status with current availability

The DOCAT102V-AT-010.0M represents the current-generation equivalent within Connor Winfield's oscillator portfolio and is designated as the direct manufacturer replacement.

Parameter Comparison

Engineering Selection Recommendations

The DOCAT102V-AT-010.0M is the manufacturer-designated replacement for the obsolete DOC102V-AT-010.0M. Selection of this substitute part is supported by the following factors:

Product Status: The substitute part maintains active production status with confirmed inventory availability (1178 pieces in stock), ensuring long-term supply chain reliability compared to the obsolete original part.

Regulatory Compliance: The DOCAT102V-AT-010.0M carries ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements. The EAR99 ECCN classification indicates standard commercial export eligibility.

Packaging and Mounting: The 6-SMD, No Lead surface mount package with specified dimensions (14.10mm x 9.10mm x 8.51mm max height) provides compatibility with modern PCB assembly processes and automated manufacturing equipment.

Functional Specifications: The substitute part is specified as a 10 MHz VCOCXO with LVCMOS output, 3.3V supply voltage, ±100ppb frequency stability, and ±10ppm absolute pull range, with operating temperature range of -40°C to 85°C.

Frequently Asked Questions (FAQ)

Q: Why is the DOC102V-AT-010.0M classified as obsolete?

A: The DOC102V-AT-010.0M has reached end-of-life status within Connor Winfield's product portfolio. The manufacturer has transitioned to the DOCAT series as the current-generation oscillator line.

Q: Is the DOCAT102V-AT-010.0M a direct pin-for-pin replacement?

A: The DOCAT102V-AT-010.0M is the manufacturer-recommended substitute. Verification of mechanical fit and electrical compatibility with your specific application circuit is required, as detailed package dimensions and pinout information should be confirmed against your PCB design.

Q: What is the difference between DOC and DOCAT series designations?

A: The DOCAT series represents Connor Winfield's current-generation oscillator platform. The DOCAT102V-AT-010.0M incorporates VCOCXO technology with amplitude control functionality, whereas the obsolete DOC series has been discontinued.

Q: Are there any compliance differences between the original and substitute part?

A: The DOCAT102V-AT-010.0M meets ROHS3 and EAR99 classifications. The original DOC102V-AT-010.0M compliance status is not specified in available documentation. Current designs should reference the substitute part's compliance certifications.

Q: What is the MSL rating and why does it matter?

A: The DOCAT102V-AT-010.0M carries MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. This simplifies storage, handling, and assembly processes compared to higher MSL-rated components.

Q: Can I use the DOCAT102V-AT-010.0M in existing inventory of DOC102V-AT-010.0M applications?

A: The DOCAT102V-AT-010.0M is the designated manufacturer replacement. Circuit-level compatibility assessment is required to confirm suitability for your specific application, including verification of frequency, output standard, supply voltage, and package footprint requirements.