DOC052V-010.0M Equivalent & Substitute Parts

Part Overview

The DOC052V-010.0M is a 10 MHz VCOCXO (Voltage Controlled Crystal Oscillator) with LVCMOS output, designed for 3.3V supply applications in surface mount configurations. This oscillator operates across the industrial temperature range of -40°C to 85°C and delivers frequency stability of ±50ppb. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

DOC052V-010.0M

Connor WinfieldIn Stock: 918DOC052V-010.0M Datasheet

Current PartRFQ

DOCAT052V-010.0M

Connor WinfieldIn Stock: 1274DOCAT052V-010.0M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DOC052V-010.0M is determined by strict equivalence across the following critical parameters:

• Frequency: 10 MHz (exact match required)
• Output Configuration: LVCMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Oscillator Type: VCOCXO (exact match required)
• Package: 6-SMD, No Lead (exact match required)
• Frequency Stability: ±50ppb (exact match required)
• Operating Temperature Range: -40°C to 85°C (exact match required)

The DOCAT052V-010.0M qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is the transition from obsolete (DOC series) to active product status (DOCAT series), with packaging available in Tape & Reel format for production environments.

Parameter Comparison

Engineering Selection Recommendations

The DOCAT052V-010.0M is the manufacturer-recommended substitute for the obsolete DOC052V-010.0M. Both components maintain identical electrical and functional specifications, ensuring direct compatibility in existing circuit designs. The DOCAT series represents the active production line continuation, with full ROHS3 compliance and unlimited moisture sensitivity rating maintained across both variants.

The maximum seated height differential of 0.71mm (7.80mm versus 8.51mm) falls within typical PCB assembly tolerances and does not present mechanical interference concerns for standard surface mount applications. Tape & Reel packaging availability for the DOCAT052V-010.0M supports high-volume manufacturing workflows.

Frequently Asked Questions (FAQ)

Q: Can the DOCAT052V-010.0M be used as a direct replacement for the DOC052V-010.0M?

A: Yes. Both components share identical electrical specifications, frequency output, supply voltage, temperature range, and package footprint. The DOCAT series is the active production equivalent of the obsolete DOC series.

Q: What is the significance of the height difference between the two parts?

A: The DOC052V-010.0M has a maximum seated height of 7.80mm, while the DOCAT052V-010.0M measures 8.51mm. This 0.71mm difference is within standard PCB assembly tolerances and does not affect circuit board layout or component placement for typical applications.

Q: Are there compliance differences between the two parts?

A: No. Both the DOC052V-010.0M and DOCAT052V-010.0M maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity rating. Regulatory and environmental compliance is equivalent.

Q: Why is the DOC052V-010.0M listed as obsolete?

A: The DOC series has been superseded by the DOCAT series as the active production line. The DOCAT052V-010.0M provides the same functionality with continued manufacturer support and availability.

Q: What packaging options are available for the substitute part?

A: The DOCAT052V-010.0M is supplied in Tape & Reel (TR) format, which is standard for production-volume component procurement and automated assembly processes.