DOC020F-010.0M Equivalent & Substitute Parts

Part Overview

The DOC020F-010.0M is a 10 MHz OCXO (Oven Controlled Crystal Oscillator) manufactured by Connor Winfield, designed for applications requiring stable frequency output with LVCMOS logic levels at 3.3V supply voltage. The part is classified as Obsolete, necessitating identification of equivalent alternatives for continued system support and new designs. Substitute parts maintain identical electrical and mechanical specifications while offering improved availability and product status.

Substiute Parts

DOC020F-010.0M

Connor WinfieldIn Stock: 889DOC020F-010.0M Datasheet

Current PartRFQ

DOCAT020F-010.0M

Connor WinfieldIn Stock: 1203DOCAT020F-010.0M Datasheet

DirectRFQ

DOXSC020F-010.0M

Connor WinfieldIn Stock: 1177DOXSC020F-010.0M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: frequency (10 MHz), output logic (LVCMOS), supply voltage (3.3V), frequency stability (±20ppb), operating temperature range (0°C ~ 70°C), package type (6-SMD, No Lead), and physical dimensions (0.555" L x 0.358" W). All identified substitutes meet these core electrical and mechanical requirements. Packaging format (Tape & Reel) represents a logistical variation that does not affect functional compatibility. Product status and availability are secondary considerations that support the substitution decision.

Parameter Comparison

Engineering Selection Recommendations

DOXSC020F-010.0M is the primary recommended substitute, classified as Active product status with full availability. This part maintains all electrical specifications and physical dimensions required for direct replacement while offering superior long-term supply chain stability.

DOCAT020F-010.0M serves as a secondary alternative, providing equivalent electrical and mechanical performance. Although discontinued at DiGi Electronics, current inventory availability supports near-term applications. This part bridges the transition between the obsolete DOC020F-010.0M and the active DOXSC020F-010.0M series.

All three parts comply with ROHS3 and REACH requirements, ensuring regulatory compatibility across applications. Moisture Sensitivity Level 1 (Unlimited) indicates no special handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can DOXSC020F-010.0M directly replace DOC020F-010.0M in existing designs?

A: Yes. Both parts share identical electrical specifications (10 MHz, LVCMOS, 3.3V, ±20ppb stability, 0°C ~ 70°C operating range) and package type (6-SMD, No Lead). Physical dimensions are equivalent. The seated height difference (0.307" vs 0.335") is within typical PCB assembly tolerances and does not affect functional compatibility.

Q: What is the difference between DOC020F-010.0M and DOCAT020F-010.0M?

A: Both parts are electrically and mechanically identical. The primary difference is packaging format: DOC020F-010.0M uses standard packaging while DOCAT020F-010.0M is supplied in Tape & Reel format. Seated height is 0.028" greater on DOCAT020F-010.0M (8.51mm vs 7.80mm).

Q: Why is DOXSC020F-010.0M recommended over DOCAT020F-010.0M?

A: DOXSC020F-010.0M maintains Active product status, ensuring long-term availability and manufacturing continuity. DOCAT020F-010.0M is Discontinued at DiGi Electronics, presenting potential supply constraints. Both parts are functionally equivalent.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts are ROHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99. Moisture Sensitivity Level is 1 (Unlimited) for all variants, indicating identical handling requirements.

Q: What is the Absolute Pull Range (APR) specification?

A: APR is not specified for DOC020F-010.0M or DOCAT020F-010.0M. DOXSC020F-010.0M specifies ±15ppm APR, representing an additional performance parameter available in the active product variant.