DMTH8001STLW-13 Equivalent & Substitute Parts

Part Overview

The DMTH8001STLW-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 80 V drain-to-source voltage with 270 A continuous drain current at Tc. This device is housed in a POWERDI1012-8 surface mount package and is designed for high-current switching applications requiring low on-resistance performance. The part is currently in active production status with ROHS3 compliance and REACH unaffected classification.

Substitute parts are identified when equivalent electrical characteristics, mechanical compatibility, and regulatory compliance are maintained across the same product category and packaging specification.

Substiute Parts

DMTH8001STLW-13

Diodes IncorporatedIn Stock: 875DMTH8001STLW-13 Datasheet

Current PartRFQ

DMTH8001STLWQ-13

Diodes IncorporatedIn Stock: 3975DMTH8001STLWQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMTH8001STLW-13 are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• FET Type: N-Channel
• Technology: MOSFET (Metal Oxide)
• Drain to Source Voltage (Vdss): 80 V
• Continuous Drain Current (Id) @ 25°C: 270 A (Tc)
• On-Resistance (Rds On): 1.7 mOhm @ 30A, 10V
• Gate Charge (Qg): 138 nC @ 10 V
• Maximum Gate Voltage (Vgs): ±20 V
• Input Capacitance (Ciss): 8894 pF @ 50 V
• Power Dissipation: 6 W (Ta), 250 W (Tc)
• Operating Temperature Range: -55°C to 175°C (TJ)

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount
• Package / Case: 8-PowerSFN
• Supplier Device Package: POWERDI1012-8
• Packaging Format: Tape & Reel (TR)

Regulatory Compliance Criteria:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Parts meeting all electrical, mechanical, and regulatory criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

DMTH8001STLWQ-13 is a direct parametric equivalent to DMTH8001STLW-13. Both parts are manufactured by Diodes Incorporated and maintain identical electrical specifications, mechanical packaging, and regulatory compliance status.

Selection Basis:

Both parts are classified as Active products, ensuring continued manufacturing support and availability. Both maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for industrial and commercial applications.

The DMTH8001STLWQ-13 variant includes documented Moisture Sensitivity Level (MSL) classification of 1 (Unlimited), providing additional handling specification clarity for supply chain management.

Inventory availability differs between the two parts: DMTH8001STLW-13 has 857 pieces in stock, while DMTH8001STLWQ-13 has 3871 pieces in stock. Selection between these equivalents may be driven by procurement lead time and inventory requirements.

Frequently Asked Questions (FAQ)

Q: Can DMTH8001STLWQ-13 be used as a direct replacement for DMTH8001STLW-13?

A: Yes. Both parts are N-Channel MOSFETs with identical electrical ratings (80 V Vdss, 270 A continuous drain current, 1.7 mOhm Rds On), identical package specifications (POWERDI1012-8, 8-PowerSFN), and identical regulatory compliance (ROHS3, REACH unaffected). No circuit modifications are required.

Q: Are there differences in thermal performance between these parts?

A: No. Both parts have identical power dissipation ratings of 6 W (Ta) and 250 W (Tc), and identical operating temperature ranges of -55°C to 175°C (TJ).

Q: What is the significance of the MSL rating on DMTH8001STLWQ-13?

A: MSL 1 (Unlimited) indicates that the DMTH8001STLWQ-13 has no moisture sensitivity restrictions and does not require special storage or handling conditions. This specification is provided for supply chain and assembly process planning.

Q: Are both parts suitable for the same PCB layout and thermal management design?

A: Yes. Both parts use the identical POWERDI1012-8 surface mount package with the same footprint, pin configuration, and thermal characteristics. PCB layouts and thermal management designs are directly interchangeable.

Q: What is the difference between the part numbers DMTH8001STLW-13 and DMTH8001STLWQ-13?

A: The suffix difference (W versus WQ) indicates a manufacturing or qualification variant within Diodes Incorporated's product line. Electrical and mechanical specifications are identical. The Q designation may indicate additional quality or traceability documentation.

Q: Can these parts be mixed in the same production batch?

A: Yes. Both parts meet identical electrical, mechanical, and regulatory specifications. However, supply chain and quality documentation practices should be reviewed to ensure traceability requirements are met for your application.