DMTH6010LPS-13 Equivalent & Substitute Parts

Part Overview

The DMTH6010LPS-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 13.5A continuous drain current at 25°C (Ta) and 100A at case temperature (Tc). This device is housed in a Surface Mount PowerDI5060-8 package (8-PowerTDFN) and is designed for power switching applications requiring low on-resistance and high thermal performance. The part is Active in product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, package compatibility, and thermal characteristics to ensure direct functional replacement in circuit designs.

Substiute Parts

DMTH6010LPS-13

Diodes IncorporatedIn Stock: 9279DMTH6010LPS-13 Datasheet

Current PartRFQ

DMTH6010LPSQ-13

Diodes IncorporatedIn Stock: 3193DMTH6010LPSQ-13 Datasheet

Parametric EquivalentRFQ

FDMS86520L

onsemiIn Stock: 35977FDMS86520L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMTH6010LPS-13 are identified based on the following electrical and mechanical criteria:

Primary Substitution Criteria:

• Drain-to-Source Voltage (Vdss): 60V
• Continuous Drain Current @ 25°C (Ta): 13.5A minimum
• On-Resistance (Rds On): 8mOhm or lower @ specified gate voltage
• Gate Threshold Voltage (Vgs(th)): 3V @ 250µA
• Package Type: Surface Mount, 8-pin configuration
• Technology: N-Channel MOSFET (Metal Oxide)
• Compliance: ROHS3 Compliant, MSL 1

Parametric Equivalent Classification: Parts meeting all primary criteria with identical or superior electrical performance are classified as parametric equivalents. These parts maintain functional interchangeability within the same circuit topology.

Manufacturer Recommended Classification: Parts from alternative manufacturers that meet or exceed the primary criteria are designated as manufacturer-recommended substitutes when they provide equivalent or improved performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

DMTH6010LPSQ-13 (Parametric Equivalent): The DMTH6010LPSQ-13 is a parametric equivalent manufactured by Diodes Incorporated with identical electrical specifications to the DMTH6010LPS-13. Both devices share the same base product number (DMTH6010), voltage rating, current rating, on-resistance, and thermal characteristics. The primary distinction is the packaging format (Tape & Reel for both). This part is Active in product status with ROHS3 compliance and MSL 1 rating. Direct substitution is supported for applications requiring identical performance parameters.

FDMS86520L (Manufacturer-Recommended Substitute): The FDMS86520L is manufactured by onsemi and meets the core electrical specifications of the DMTH6010LPS-13, including 60V Vdss, 13.5A continuous drain current at 25°C, and 8.2mOhm on-resistance. This part is Active in product status with ROHS3 compliance and MSL 1 rating. Notable differences include higher gate charge (63 nC versus 41.3 nC), higher input capacitance (4615 pF versus 2090 pF), reduced case temperature current rating (22A versus 100A), and lower maximum operating temperature (150°C versus 175°C). Substitution is appropriate for applications where the reduced thermal performance and higher input capacitance do not impact circuit operation.

Compliance and Availability: All three parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity ratings. The DMTH6010LPS-13 has 9267 pieces in stock, DMTH6010LPSQ-13 has 3111 pieces, and FDMS86520L has 35910 pieces available.

Frequently Asked Questions (FAQ)

Q: Can DMTH6010LPSQ-13 be used as a direct replacement for DMTH6010LPS-13?

A: Yes. The DMTH6010LPSQ-13 is a parametric equivalent with identical electrical specifications, including Vdss, drain current, on-resistance, gate threshold voltage, and thermal characteristics. Both parts are manufactured by Diodes Incorporated and share the same base product number. Direct substitution is supported without circuit modification.

Q: What are the key differences between DMTH6010LPS-13 and FDMS86520L?

A: The FDMS86520L differs in the following parameters: gate charge is higher (63 nC versus 41.3 nC), input capacitance is higher (4615 pF versus 2090 pF), case temperature current rating is lower (22A versus 100A), and maximum operating temperature is lower (150°C versus 175°C). On-resistance is slightly higher (8.2 mOhm versus 8 mOhm). These differences may affect switching speed and thermal performance in high-current or high-temperature applications.

Q: Are all three parts housed in the same package?

A: Yes. All three parts use the 8-PowerTDFN Surface Mount package. Pin-to-pin compatibility is maintained across all three devices, supporting direct PCB layout reuse.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) packaging is supplied as individual tape segments. Digi-Reel® is a proprietary reel format. Both formats contain the same component; the difference is in supply and handling method for manufacturing processes.

Q: Can FDMS86520L be used in applications requiring operation above 150°C?

A: No. The FDMS86520L has a maximum operating temperature of 150°C, while the DMTH6010LPS-13 operates to 175°C. Applications requiring operation in the 150°C to 175°C range require the DMTH6010LPS-13 or DMTH6010LPSQ-13.

Q: Are all three parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant with REACH unaffected status and MSL 1 (unlimited) moisture sensitivity ratings.

Q: Which part should be selected for high-frequency switching applications?

A: The DMTH6010LPS-13 or DMTH6010LPSQ-13 are preferred for high-frequency switching due to lower gate charge (41.3 nC) and lower input capacitance (2090 pF) compared to the FDMS86520L (63 nC and 4615 pF respectively). Lower gate charge reduces switching losses and driver power requirements.