DMTH6005LPS-13 N-Channel MOSFET 60V Equivalent & Substitute Parts

Part Overview

The DMTH6005LPS-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with continuous drain current of 20.6A at Ta and 100A at Tc. The device is housed in a PowerDI5060-8 surface mount package and is classified as Active product status. This part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching electrical characteristics including drain-to-source voltage rating, continuous drain current capability, on-resistance specifications, gate charge, and thermal performance parameters. Substitute parts maintain functional compatibility within the specified parameter ranges while potentially offering different packaging, availability, or thermal performance characteristics.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	60	V
Current - Continuous Drain (Id) @ 25°C (Ta)	20.6	A
Current - Continuous Drain (Id) @ 25°C (Tc)	100	A
Rds On (Max) @ Id, Vgs	5.5 mOhm @ 50A, 10V	mOhm
Gate Charge (Qg) (Max) @ Vgs	47.1	nC @ 10V
Vgs(th) (Max) @ Id	3	V @ 250µA
Input Capacitance (Ciss) (Max) @ Vds	2962	pF @ 30V
Power Dissipation (Max) (Ta)	3.2	W
Power Dissipation (Max) (Tc)	150	W
Operating Temperature Range	-55 to 175	°C (TJ)
Mounting Type	Surface Mount	-
Package / Case	8-PowerTDFN	-
RoHS Status	ROHS3 Compliant	-
MSL Rating	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitute parts for the DMTH6005LPS-13 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent: Parts that maintain identical or near-identical electrical specifications across all critical parameters including Vdss, Id ratings, Rds On, gate charge, and thermal characteristics. These parts are direct functional replacements with no design modifications required.

Manufacturer Recommended Substitutes: Parts that share the same Vdss rating and comparable Id ratings but may exhibit variations in secondary parameters such as Rds On, gate charge, input capacitance, or thermal performance. These parts are suitable for applications where the primary voltage and current requirements are met, though circuit performance characteristics may differ slightly.

The substitution logic is based on the following key parameters:

Drain to Source Voltage (Vdss): Must equal 60V
Continuous Drain Current (Id): Must support minimum 20.6A at Ta or 100A at Tc
On-Resistance (Rds On): Must not exceed specified maximum values for the application
Gate Charge (Qg): Affects switching speed and driver requirements
Operating Temperature Range: Must support -55°C to 150°C minimum
Package Type: Surface mount compatibility required
Compliance: RoHS3 and REACH requirements maintained

Parameter Comparison

Parameter	DMTH6005LPS-13	DMTH6005LPSQ-13	CSD18533Q5A	FDMS5352	FDMS86520
Manufacturer	Diodes Incorporated	Diodes Incorporated	Texas Instruments	onsemi	onsemi
Vdss (V)	60	60	60	60	60
Id @ Ta (A)	20.6	20.6	17	13.6	14
Id @ Tc (A)	100	100	100	49	42
Rds On (Max) @ Id, Vgs (mOhm)	5.5 @ 50A, 10V	5.5 @ 50A, 10V	5.9 @ 18A, 10V	6.7 @ 13.6A, 10V	7.4 @ 14A, 10V
Vgs(th) (Max) @ Id (V)	3 @ 250µA	3 @ 250µA	2.3 @ 250µA	3 @ 250µA	4.5 @ 250µA
Gate Charge (Qg) (Max) @ Vgs (nC)	47.1 @ 10V	47.1 @ 10V	36 @ 10V	131 @ 10V	40 @ 10V
Input Capacitance (Ciss) (Max) @ Vds (pF)	2962 @ 30V	2962 @ 30V	2750 @ 30V	6940 @ 30V	2850 @ 30V
Power Dissipation (Max) @ Ta (W)	3.2	3.2	3.2	2.5	2.5
Power Dissipation (Max) @ Tc (W)	150	150	116	104	69
Operating Temperature Range (°C)	-55 to 175	-55 to 175	-55 to 150	-55 to 150	-55 to 150
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	8-PowerTDFN	8-PowerTDFN	8-PowerTDFN	8-PowerTDFN	8-PowerTDFN
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

DMTH6005LPSQ-13 (Parametric Equivalent): This Diodes Incorporated part is a direct parametric equivalent to the DMTH6005LPS-13, offering identical electrical specifications and thermal performance. Both parts share the same base product number (DMTH6005) and are manufactured in the same PowerDI5060-8 package. The DMTH6005LPSQ-13 maintains RoHS3 compliance and MSL 1 rating. Selection of this part requires no circuit modifications and provides equivalent performance in all applications. Current inventory availability is 4264 pieces.

CSD18533Q5A (Texas Instruments NexFET™): This Texas Instruments part maintains the 60V Vdss rating and 100A Tc current rating. The CSD18533Q5A exhibits lower gate charge (36 nC versus 47.1 nC) and lower threshold voltage (2.3V versus 3V), resulting in faster switching characteristics and reduced driver power requirements. The maximum operating temperature is limited to 150°C compared to 175°C for the DMTH6005LPS-13. This part is suitable for applications prioritizing switching speed and driver efficiency. RoHS3 compliance and MSL 1 rating are maintained. Current inventory availability is 52800 pieces.

FDMS5352 (onsemi PowerTrench®): This onsemi part maintains the 60V Vdss rating but supports lower continuous drain current (13.6A at Ta, 49A at Tc). The FDMS5352 exhibits higher gate charge (131 nC) and significantly higher input capacitance (6940 pF), indicating different switching characteristics. Maximum operating temperature is 150°C. This part is suitable for lower current applications where the reduced current rating is acceptable. RoHS3 compliance and MSL 1 rating are maintained. Current inventory availability is 1500 pieces.

FDMS86520 (onsemi PowerTrench®): This onsemi part maintains the 60V Vdss rating but supports lower continuous drain current (14A at Ta, 42A at Tc). The FDMS86520 exhibits higher on-resistance (7.4 mOhm versus 5.5 mOhm) and higher threshold voltage (4.5V versus 3V). Maximum operating temperature is 150°C. This part is suitable for lower current applications where the reduced current rating and higher threshold voltage are acceptable. RoHS3 compliance and MSL 1 rating are maintained. Current inventory availability is 95100 pieces.

All substitute parts maintain RoHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can DMTH6005LPSQ-13 be used as a direct replacement for DMTH6005LPS-13?

A: Yes. The DMTH6005LPSQ-13 is a parametric equivalent with identical electrical specifications, thermal performance, and package type. No circuit modifications are required for substitution.

Q: What is the primary difference between DMTH6005LPS-13 and CSD18533Q5A?

A: Both parts share the same 60V Vdss rating and 100A Tc current capability. The CSD18533Q5A has lower gate charge (36 nC versus 47.1 nC) and lower threshold voltage (2.3V versus 3V), enabling faster switching. The CSD18533Q5A maximum operating temperature is 150°C versus 175°C for the DMTH6005LPS-13.

Q: Are FDMS5352 and FDMS86520 suitable for all applications using DMTH6005LPS-13?

A: No. Both onsemi parts support lower continuous drain current ratings (13.6A and 14A at Ta respectively, compared to 20.6A). These parts are suitable only for applications where the reduced current rating is acceptable. Verify application current requirements before substitution.

Q: Do all substitute parts maintain the same package type?

A: Yes. All substitute parts use the 8-PowerTDFN surface mount package, ensuring mechanical and thermal interface compatibility with the original DMTH6005LPS-13.

Q: What compliance certifications are maintained across all substitute parts?

A: All substitute parts maintain RoHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating. ECCN and HTSUS classifications are identical across all parts.

Q: How does gate charge affect circuit design when substituting parts?

A: Gate charge (Qg) determines the charge required to switch the MOSFET on and off. Lower gate charge (CSD18533Q5A at 36 nC) reduces driver power requirements and enables faster switching. Higher gate charge (FDMS5352 at 131 nC) requires higher driver capability. Verify gate driver specifications support the substitute part's gate charge rating.

Q: What is the significance of threshold voltage (Vgs(th)) differences?

A: Threshold voltage determines the gate voltage required to turn the MOSFET on. The CSD18533Q5A has lower threshold voltage (2.3V), enabling operation with lower gate drive voltages. The FDMS86520 has higher threshold voltage (4.5V), requiring higher gate drive voltage. Verify gate driver output voltage compatibility with the substitute part.

Q: Can parts with different maximum operating temperatures be used interchangeably?

A: No. The DMTH6005LPS-13 supports operation to 175°C, while substitute parts CSD18533Q5A, FDMS5352, and FDMS86520 are limited to 150°C. Applications requiring operation above 150°C must use the DMTH6005LPS-13 or DMTH6005LPSQ-13.

Q: How does on-resistance (Rds On) affect power dissipation?

A: On-resistance directly determines conduction losses. Lower Rds On (DMTH6005LPS-13 at 5.5 mOhm) results in lower power dissipation and heat generation. Higher Rds On (FDMS86520 at 7.4 mOhm) increases power dissipation. Verify thermal management capability when substituting parts with higher on-resistance.

Q: Are there inventory considerations when selecting substitute parts?

A: Yes. Current inventory availability varies: DMTH6005LPS-13 (3335 pcs), DMTH6005LPSQ-13 (4264 pcs), CSD18533Q5A (52800 pcs), FDMS5352 (1500 pcs), and FDMS86520 (95100 pcs). Availability may influence substitution decisions for high-volume applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message