DMTH6002LPSW-13 Equivalent & Substitute Parts

Part Overview

The DMTH6002LPSW-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 205A continuous drain current at Tc. This device is housed in an 8-PowerTDFN surface mount package and is designed for high-current switching applications requiring low on-resistance performance. The part is currently in active production status with 848 pieces available in inventory. Substitute parts are identified when electrical characteristics, package specifications, and compliance certifications remain equivalent, enabling direct replacement in circuit designs without performance degradation.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	205	A (Tc)
On-Resistance (Rds On Max) @ 30A, 10V	2	mOhm
Gate Threshold Voltage (Vgs(th) Max) @ 250µA	3	V
Gate Charge (Qg Max) @ 10V	131	nC
Input Capacitance (Ciss Max) @ 30V	8289	pF
Power Dissipation (Max)	3 (Ta), 167 (Tc)	W
Operating Temperature Range	-55 to 175	°C (TJ)
Package Type	8-PowerTDFN	Surface Mount
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the DMTH6002LPSW-13 is determined by equivalence across the following critical parameters:

Electrical Equivalence Criteria:

Drain-to-Source Voltage (Vdss): 60V
Continuous Drain Current (Id) @ 25°C: 205A (Tc)
On-Resistance (Rds On Max) @ 30A, 10V: 2mOhm
Gate Threshold Voltage (Vgs(th) Max): 3V @ 250µA
Gate Charge (Qg Max): 131 nC @ 10V
Input Capacitance (Ciss Max): 8289 pF @ 30V
Power Dissipation (Max): 3W (Ta), 167W (Tc)
Operating Temperature Range: -55°C to 175°C (TJ)

Mechanical Equivalence Criteria:

Package Type: 8-PowerTDFN
Mounting Type: Surface Mount
Supplier Device Package: PowerDI5060-8 (SWP)

Compliance Equivalence Criteria:

RoHS Status: ROHS3 Compliant
REACH Status: REACH Unaffected

Substitute parts must match all electrical parameters, package specifications, and compliance certifications to ensure direct circuit compatibility without design modification.

Parameter Comparison

Parameter	DMTH6002LPSW-13	DMTH6002LPSWQ-13	Match
Manufacturer	Diodes Incorporated	Diodes Incorporated	✓
FET Type	N-Channel	N-Channel	✓
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	✓
Drain-to-Source Voltage (Vdss)	60 V	60 V	✓
Continuous Drain Current (Id) @ 25°C	205A (Tc)	205A (Tc)	✓
On-Resistance (Rds On Max) @ 30A, 10V	2mOhm	2mOhm	✓
Gate Threshold Voltage (Vgs(th) Max) @ 250µA	3V	3V	✓
Gate Charge (Qg Max) @ 10V	131 nC	131 nC	✓
Input Capacitance (Ciss Max) @ 30V	8289 pF	8289 pF	✓
Power Dissipation (Max)	3W (Ta), 167W (Tc)	3W (Ta), 167W (Tc)	✓
Operating Temperature Range	-55°C ~ 175°C (TJ)	-55°C ~ 175°C (TJ)	✓
Package Type	8-PowerTDFN	8-PowerTDFN	✓
Mounting Type	Surface Mount	Surface Mount	✓
Supplier Device Package	PowerDI5060-8 (SWP)	PowerDI5060-8 (SWP)	✓
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	✓
REACH Status	REACH Unaffected	REACH Unaffected	✓
Product Status	Active	Active	✓
Grade	Standard	Automotive	—
Qualification	—	AEC-Q101	—
Moisture Sensitivity Level (MSL)	—	1 (Unlimited)	—

Engineering Selection Recommendations

Both the DMTH6002LPSW-13 and DMTH6002LPSWQ-13 are electrically and mechanically equivalent N-Channel MOSFETs from Diodes Incorporated. All critical electrical parameters, including Vdss, Id, Rds On, gate charge, and input capacitance, are identical. Both devices are housed in the 8-PowerTDFN surface mount package and comply with ROHS3 and REACH requirements.

The DMTH6002LPSWQ-13 carries automotive-grade qualification (AEC-Q101) and is designated for automotive applications. The DMTH6002LPSW-13 is the standard industrial-grade variant. Selection between these parts depends on application requirements: automotive-qualified designs should specify DMTH6002LPSWQ-13, while standard industrial applications may use either part interchangeably based on availability and supply chain considerations.

Both parts are in active production status with adequate inventory availability. The DMTH6002LPSWQ-13 has higher inventory (3446 pieces) compared to DMTH6002LPSW-13 (848 pieces).

Frequently Asked Questions (FAQ)

Q: Can DMTH6002LPSWQ-13 be used as a direct replacement for DMTH6002LPSW-13?

A: Yes. The DMTH6002LPSWQ-13 is electrically and mechanically equivalent to the DMTH6002LPSW-13. All electrical parameters, package specifications, and compliance certifications are identical. Direct substitution is possible without circuit modification.

Q: What is the difference between DMTH6002LPSW-13 and DMTH6002LPSWQ-13?

A: The primary difference is qualification level. DMTH6002LPSWQ-13 carries AEC-Q101 automotive qualification and is designated for automotive applications. DMTH6002LPSW-13 is the standard industrial-grade variant. Electrical performance and package specifications are identical.

Q: Are both parts compatible with the same PCB layout and footprint?

A: Yes. Both parts use the 8-PowerTDFN surface mount package with identical pin configuration and footprint. PCB layouts designed for one part are directly compatible with the other.

Q: What is the operating temperature range for these MOSFETs?

A: Both devices operate across -55°C to 175°C junction temperature (TJ), suitable for industrial and automotive temperature environments.

Q: Are these parts RoHS and REACH compliant?

A: Yes. Both DMTH6002LPSW-13 and DMTH6002LPSWQ-13 are ROHS3 compliant and REACH unaffected.

Q: What is the maximum continuous drain current rating?

A: Both parts are rated for 205A continuous drain current at Tc (case temperature).

Q: What is the on-resistance specification?

A: Both devices have a maximum on-resistance (Rds On) of 2mOhm measured at 30A drain current and 10V gate-source voltage.

Q: Can these parts be used in automotive applications?

A: DMTH6002LPSWQ-13 is qualified for automotive use (AEC-Q101). DMTH6002LPSW-13 is standard industrial grade. Automotive designs should specify DMTH6002LPSWQ-13.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message