DMTH47M2LPSW-13 Equivalent & Substitute Parts

Part Overview

The DMTH47M2LPSW-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 40 V drain-to-source voltage with continuous drain current capability of 73 A at 25°C. This device is housed in a Surface Mount, Wettable Flank PowerDI5060-8 (Type UX) package and is designed for high-current switching applications requiring low on-resistance performance. The part is currently in active production status with 816 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part number becomes unavailable or when specific certifications are required for particular applications.

Substiute Parts

DMTH47M2LPSW-13

Diodes IncorporatedIn Stock: 925DMTH47M2LPSW-13 Datasheet

Current PartRFQ

DMTH47M2LPSWQ-13

Diodes IncorporatedIn Stock: 1140DMTH47M2LPSWQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMTH47M2LPSW-13 is determined by electrical and mechanical parameter equivalence within the N-Channel MOSFET category. The critical parameters that define substitutability are:

• Drain-to-Source Voltage (Vdss): 40 V
• Continuous Drain Current (Id) @ 25°C: 73 A (Tc)
• On-Resistance (Rds On Max) @ 20A, 10V: 7.3 mOhm
• Gate Threshold Voltage (Vgs(th) Max): 2.3 V @ 250µA
• Gate Charge (Qg Max): 14 nC @ 10 V
• Input Capacitance (Ciss Max): 891 pF @ 20 V
• Power Dissipation: 3.8 W (Ta), 68 W (Tc)
• Operating Temperature Range: -55°C to 175°C (TJ)
• Package: 8-PowerTDFN, Surface Mount, Wettable Flank
• Technology: MOSFET (Metal Oxide), N-Channel

The DMTH47M2LPSWQ-13 is identified as a parametric equivalent substitute. This part maintains identical electrical specifications and package configuration while incorporating additional automotive-grade qualification (AEC-Q101) and moisture sensitivity level (MSL) rating of 1 (Unlimited).

Parameter Comparison

Engineering Selection Recommendations

Both the DMTH47M2LPSW-13 and DMTH47M2LPSWQ-13 are electrically and mechanically equivalent N-Channel MOSFETs with identical performance specifications across all critical parameters. Selection between these parts is determined by application requirements and regulatory compliance needs.

DMTH47M2LPSW-13 is suitable for general industrial and commercial applications where standard RoHS3 compliance is required. This part is currently in active production with 816 units available in inventory.

DMTH47M2LPSWQ-13 is specified for automotive applications requiring AEC-Q101 qualification and extended moisture sensitivity protection (MSL 1). This variant maintains all electrical and thermal characteristics of the standard part while meeting automotive-grade reliability standards. This part is currently in active production with 1066 units available in inventory.

Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Selection should be based on the specific application environment and any automotive or reliability certifications mandated by the end-use application.

Frequently Asked Questions (FAQ)

Q: Are the DMTH47M2LPSW-13 and DMTH47M2LPSWQ-13 electrically interchangeable?

A: Yes. Both parts are N-Channel MOSFETs with identical electrical specifications, including Vdss (40 V), continuous drain current (73 A), on-resistance (7.3 mOhm @ 20A, 10V), gate threshold voltage (2.3 V), gate charge (14 nC), input capacitance (891 pF), and power dissipation ratings (3.8 W Ta, 68 W Tc). They operate across the same temperature range (-55°C to 175°C TJ) and are housed in the same 8-PowerTDFN package.

Q: What is the difference between these two parts?

A: The DMTH47M2LPSWQ-13 includes automotive-grade qualification (AEC-Q101) and specifies a moisture sensitivity level (MSL) of 1 (Unlimited), making it suitable for automotive applications. The DMTH47M2LPSW-13 is the standard industrial variant without these additional certifications.

Q: Can I use the DMTH47M2LPSWQ-13 as a substitute for the DMTH47M2LPSW-13?

A: Yes. The DMTH47M2LPSWQ-13 can be used as a direct substitute for the DMTH47M2LPSW-13 in any application. The automotive-grade qualification and MSL rating of the substitute part do not restrict its use in standard industrial applications.

Q: Can I use the DMTH47M2LPSW-13 as a substitute for the DMTH47M2LPSWQ-13?

A: The DMTH47M2LPSW-13 lacks AEC-Q101 automotive qualification and does not specify an MSL rating. Use of this part in applications requiring automotive-grade certification is not appropriate.

Q: Are both parts available in the same packaging format?

A: Yes. Both the DMTH47M2LPSW-13 and DMTH47M2LPSWQ-13 are supplied in Tape & Reel (TR) packaging with identical 8-PowerTDFN Surface Mount, Wettable Flank package configuration.

Q: What is the current inventory status for these parts?

A: The DMTH47M2LPSW-13 has 816 units in stock. The DMTH47M2LPSWQ-13 has 1066 units in stock. Both are listed as active products in current production.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the DMTH47M2LPSW-13 and DMTH47M2LPSWQ-13 are RoHS3 compliant and REACH unaffected.