DMTH4007SPS-13 Equivalent & Substitute Parts

Part Overview

The DMTH4007SPS-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 40V drain-to-source voltage with 15.7A continuous drain current at 25°C (Ta) and 100A at case temperature (Tc). The device is housed in a PowerDI5060-8 surface mount package and is designed for power switching applications requiring low on-resistance and high current handling capability. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across all critical parameters.

Substiute Parts

DMTH4007SPS-13

Diodes IncorporatedIn Stock: 9742DMTH4007SPS-13 Datasheet

Current PartRFQ

DMTH4007SPSQ-13

Diodes IncorporatedIn Stock: 3206DMTH4007SPSQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMTH4007SPS-13 are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following key parameters:

Electrical Parameters:

• Drain-to-Source Voltage (Vdss): 40V
• Continuous Drain Current: 15.7A (Ta), 100A (Tc)
• On-Resistance (Rds On): 7.6 mOhm @ 20A, 10V
• Gate Threshold Voltage: 4V @ 250µA
• Gate Charge: 41.9 nC @ 10V
• Input Capacitance: 2082 pF @ 25V
• Power Dissipation: 2.8W (Ta), 136W (Tc)
• Operating Temperature Range: -55°C to 175°C

Mechanical Parameters:

• Package Type: 8-PowerTDFN (PowerDI5060-8)
• Mounting Type: Surface Mount
• Tape & Reel (TR) packaging format

Compliance Parameters:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected
• Product Status: Active

Parts meeting all electrical, mechanical, and compliance criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The DMTH4007SPSQ-13 is a direct parametric equivalent to the DMTH4007SPS-13. Both parts are manufactured by Diodes Incorporated and share identical electrical specifications, mechanical packaging, and compliance certifications. Selection between these parts is based on availability and supply chain requirements rather than technical performance differences.

Both parts maintain active production status, ensuring long-term availability for production and maintenance applications. Both are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements. The MSL 1 rating for both parts indicates unlimited shelf life under standard storage conditions, eliminating moisture sensitivity concerns in typical manufacturing environments.

The 8-PowerTDFN surface mount package is identical for both parts, ensuring direct PCB layout compatibility without design modifications. Thermal performance characteristics are equivalent, with both parts capable of dissipating 136W at case temperature, suitable for high-current switching applications.

Frequently Asked Questions (FAQ)

Q: Can DMTH4007SPSQ-13 be used as a direct replacement for DMTH4007SPS-13?

A: Yes. The DMTH4007SPSQ-13 is a parametric equivalent with identical electrical specifications, on-resistance, gate charge, capacitance, power dissipation ratings, and operating temperature range. Both parts use the same 8-PowerTDFN package and surface mount configuration, enabling direct substitution without circuit redesign.

Q: Are there any differences in thermal performance between these parts?

A: No. Both parts have identical power dissipation ratings of 2.8W at ambient temperature (Ta) and 136W at case temperature (Tc). Thermal management requirements and heat sink specifications remain unchanged when substituting between these parts.

Q: Do both parts have the same package footprint?

A: Yes. Both DMTH4007SPS-13 and DMTH4007SPSQ-13 use the 8-PowerTDFN package type (PowerDI5060-8 supplier package designation). PCB layouts, solder pad dimensions, and mounting hole specifications are identical, allowing direct board-level substitution.

Q: What is the difference between the part numbers DMTH4007SPS-13 and DMTH4007SPSQ-13?

A: The part numbers differ only in the suffix designation (SPS versus SPSQ). Both parts share the same base product number DMTH4007 and are manufactured by Diodes Incorporated. The suffix variation does not indicate functional or electrical differences; both parts meet identical specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both DMTH4007SPS-13 and DMTH4007SPSQ-13 are ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic component manufacturing and distribution.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have MSL 1 (Unlimited) rating, indicating no moisture sensitivity concerns. These parts can be stored under standard warehouse conditions without desiccant packaging or special humidity controls.

Q: Can these parts be used interchangeably in high-current applications?

A: Yes. Both parts are rated for 15.7A continuous drain current at 25°C ambient temperature and 100A at case temperature, with identical on-resistance of 7.6 mOhm at 20A and 10V gate-source voltage. Current handling capability is equivalent for both parts.

Q: What is the gate charge specification for these MOSFETs?

A: Both parts have a maximum gate charge of 41.9 nC at 10V gate-source voltage. This specification is critical for gate driver circuit design and switching speed calculations in power conversion applications.

Q: Are there any supply chain or availability differences between these parts?

A: Availability may vary based on current inventory levels. DMTH4007SPS-13 has 9640 pieces in stock, while DMTH4007SPSQ-13 has 3142 pieces in stock. Both parts are in active production status, ensuring continued availability for future orders.