DMTH10H2M5STLW-13 Equivalent & Substitute Parts

Part Overview

The DMTH10H2M5STLW-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 100 V drain-to-source voltage with a continuous drain current of 215 A (Tc). This surface mount device is housed in an 8-PowerSFN package and is designed for high-current switching applications requiring low on-resistance performance. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

DMTH10H2M5STLW-13

Diodes IncorporatedIn Stock: 1197DMTH10H2M5STLW-13 Datasheet

Current PartRFQ

DMTH10H2M5STLWQ-13

Diodes IncorporatedIn Stock: 2124DMTH10H2M5STLWQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMTH10H2M5STLW-13 are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following parameters:

• Drain to Source Voltage (Vdss): 100 V
• Continuous Drain Current (Id) @ 25°C: 215 A (Tc)
• On-Resistance (Rds On Max): 2.5 mOhm @ 30A, 10V
• Gate Threshold Voltage (Vgs(th) Max): 4 V @ 250µA
• Gate Charge (Qg Max): 124.4 nC @ 10 V
• Input Capacitance (Ciss Max): 8450 pF @ 50 V
• Power Dissipation (Max): 5.8 W (Ta), 230.8 W (Tc)
• Operating Temperature Range: -55°C to 175°C (TJ)
• Package Type: 8-PowerSFN (POWERDI1012-8)
• FET Type: N-Channel MOSFET
• Mounting Type: Surface Mount

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Additional qualifications such as automotive grade or AEC-Q101 certification represent enhanced product variants suitable for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The DMTH10H2M5STLW-13 and DMTH10H2M5STLWQ-13 are parametric equivalents with identical electrical and mechanical specifications. Both parts are manufactured by Diodes Incorporated, are in active production status, and comply with ROHS3 and REACH requirements.

The primary distinction between these parts is the automotive qualification of the DMTH10H2M5STLWQ-13, which carries AEC-Q101 certification and automotive-grade designation. This variant is suitable for applications requiring automotive-level reliability and traceability standards.

Selection between these parts should be based on application requirements:

• DMTH10H2M5STLW-13: Suitable for general industrial, consumer, and commercial switching applications where automotive qualification is not required.
• DMTH10H2M5STLWQ-13: Required for automotive applications, safety-critical systems, or designs requiring AEC-Q101 qualified components.

Both parts are available in Tape & Reel packaging for automated assembly and maintain unlimited moisture sensitivity rating (MSL 1), eliminating bake-out requirements prior to reflow soldering.

Frequently Asked Questions (FAQ)

Q: Are DMTH10H2M5STLW-13 and DMTH10H2M5STLWQ-13 pin-for-pin compatible?

A: Yes. Both parts use the 8-PowerSFN package (POWERDI1012-8) with identical pinout and footprint. Direct substitution on the PCB is possible without layout modifications.

Q: What is the difference between these two part numbers?

A: The DMTH10H2M5STLWQ-13 includes automotive-grade qualification and AEC-Q101 certification. All electrical and mechanical parameters are identical. The "Q" designation in the part number indicates automotive qualification.

Q: Can I use DMTH10H2M5STLW-13 in an automotive application?

A: The standard-grade DMTH10H2M5STLW-13 does not carry automotive qualification. For automotive applications, the AEC-Q101 qualified DMTH10H2M5STLWQ-13 is the appropriate selection.

Q: Are both parts RoHS compliant?

A: Yes. Both DMTH10H2M5STLW-13 and DMTH10H2M5STLWQ-13 are ROHS3 compliant and REACH unaffected.

Q: What is the continuous drain current rating?

A: Both parts are rated for 215 A continuous drain current (Tc) at 25°C with a maximum on-resistance of 2.5 mOhm at 30 A and 10 V gate-source voltage.

Q: What packaging formats are available?

A: Both parts are supplied in Tape & Reel (TR) packaging for automated assembly processes. The moisture sensitivity level is 1 (unlimited), requiring no special storage or bake-out procedures.

Q: What is the operating temperature range?

A: Both parts operate from -55°C to 175°C junction temperature (TJ), suitable for industrial and automotive temperature environments.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, for non-automotive applications, DMTH10H2M5STLW-13 and DMTH10H2M5STLWQ-13 are direct substitutes. For automotive designs, only the AEC-Q101 qualified DMTH10H2M5STLWQ-13 should be used.