DMT6013LFDF-13 Equivalent & Substitute Parts

Part Overview

The DMT6013LFDF-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 10A continuous drain current at 25°C. This surface mount device is housed in a 6-UDFN package with exposed pad and is designed for general-purpose switching applications requiring moderate power dissipation up to 900mW. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Identifying equivalent substitute parts is necessary to address supply chain constraints, inventory availability, or design flexibility requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

DMT6013LFDF-13

Diodes IncorporatedIn Stock: 1019DMT6013LFDF-13 Datasheet

Current PartRFQ

DMT6013LFDF-7

Diodes IncorporatedIn Stock: 27153DMT6013LFDF-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMT6013LFDF-13 are identified based on strict electrical and mechanical parameter matching. The substitution logic is based on the following critical parameters:

Electrical Equivalence Criteria:

• FET Type: N-Channel
• Technology: MOSFET (Metal Oxide)
• Drain to Source Voltage (Vdss): 60V
• Continuous Drain Current (Id) @ 25°C: 10A (Ta)
• On-State Resistance (Rds On): 15mOhm @ 8.5A, 10V
• Gate Threshold Voltage (Vgs(th)): 2.3V @ 250µA
• Gate Charge (Qg): 15nC @ 10V
• Maximum Gate Voltage (Vgs): ±20V
• Input Capacitance (Ciss): 1081pF @ 30V
• Power Dissipation: 900mW (Ta)
• Operating Temperature: -55°C to 150°C (TJ)

Mechanical Equivalence Criteria:

• Package Type: 6-UDFN Exposed Pad
• Mounting Type: Surface Mount
• Supplier Device Package: U-DFN2020-6 (Type F)

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Parts meeting all electrical, mechanical, and compliance parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The DMT6013LFDF-7 is a direct parametric equivalent to the DMT6013LFDF-13. Both parts are manufactured by Diodes Incorporated and share identical electrical specifications, mechanical packaging, and compliance certifications. Selection between these parts is based on availability and supply chain considerations rather than technical performance differences.

Both parts maintain active product status, ensuring continued manufacturing support and supply chain stability. Both are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for industrial and commercial applications. The MSL 1 rating (unlimited moisture sensitivity) indicates both parts require standard handling procedures without special moisture control measures.

The 6-UDFN Exposed Pad package is identical across both parts, ensuring direct PCB layout compatibility and thermal performance equivalence. Surface mount assembly processes require no modification when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can DMT6013LFDF-7 be used as a direct replacement for DMT6013LFDF-13?

A: Yes. The DMT6013LFDF-7 is a parametric equivalent with identical electrical ratings, on-state resistance, gate charge, input capacitance, power dissipation, and operating temperature range. Both parts use the same 6-UDFN Exposed Pad package and mounting type, enabling direct substitution without circuit modification.

Q: Are there any differences in package dimensions or PCB footprint between these parts?

A: No. Both the DMT6013LFDF-13 and DMT6013LFDF-7 use the U-DFN2020-6 (Type F) package with 6-UDFN Exposed Pad configuration. PCB footprints and assembly requirements are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. Regulatory and environmental compliance is equivalent across both parts.

Q: What is the difference between DMT6013LFDF-13 and DMT6013LFDF-7 if all specifications are identical?

A: The difference lies in manufacturing date codes and inventory availability. The suffix designations (-13 and -7) indicate different production batches or date code ranges. Electrically and mechanically, the parts are equivalent. Selection is based on supply chain availability and lead time requirements.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both parts operate across the identical temperature range of -55°C to 150°C (TJ). Thermal performance and reliability are equivalent at all operating temperatures within this range.

Q: Is thermal management different between these two part numbers?

A: No. Both parts have identical power dissipation ratings of 900mW (Ta) and use the same exposed pad configuration for thermal coupling to PCB ground planes. Thermal design considerations are identical.