DMT6012LFDF-13 Equivalent & Substitute Parts

Part Overview

The DMT6012LFDF-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 9.5A continuous drain current at 25°C. This device is housed in a 6-UDFN surface mount package with exposed pad and is designed for general-purpose switching and amplification applications in power management circuits.

The DMT6012LFDF-13 maintains Active product status and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified based on identical electrical specifications and mechanical compatibility within the same device family, ensuring direct functional replacement without circuit redesign.

Substiute Parts

DMT6012LFDF-13

Diodes IncorporatedIn Stock: 1057DMT6012LFDF-13 Datasheet

Current PartRFQ

DMT6012LFDF-7

Diodes IncorporatedIn Stock: 2250DMT6012LFDF-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMT6012LFDF-13 are identified through parametric equivalence within the DMT6012 base product family. Substitution is valid when all of the following criteria are met:

Critical Substitution Parameters:

• Drain-to-Source Voltage (Vdss): 60V
• Continuous Drain Current (Id) @ 25°C: 9.5A
• On-State Resistance (Rds On Max): 14mOhm @ 8.5A, 10V
• Gate Threshold Voltage (Vgs(th) Max): 2.3V @ 250µA
• Gate Charge (Qg Max): 13.6nC @ 10V
• Input Capacitance (Ciss Max): 785pF @ 30V
• Power Dissipation: 900mW (Ta), 11W (Tc)
• Operating Temperature Range: -55°C to 150°C
• Package: 6-UDFN Exposed Pad (U-DFN2020-6 Type F)
• Mounting: Surface Mount

The DMT6012LFDF-7 meets all parametric and mechanical requirements for direct substitution with the DMT6012LFDF-13. Both devices share identical electrical characteristics, thermal specifications, and package geometry, enabling pin-for-pin replacement in existing circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The DMT6012LFDF-7 is a direct parametric equivalent to the DMT6012LFDF-13 and is suitable for applications requiring identical electrical and thermal performance. Both devices maintain Active product status from Diodes Incorporated and carry equivalent compliance certifications: ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity, and REACH Unaffected status.

Selection between these parts should be based on inventory availability and supply chain considerations. The DMT6012LFDF-7 currently maintains higher inventory levels (2140 pcs) compared to the DMT6012LFDF-13 (977 pcs), which may influence procurement decisions for high-volume applications.

Both devices are suitable for power management, switching, and general-purpose amplification circuits operating within the specified voltage and current ranges. No circuit modifications are required when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can the DMT6012LFDF-7 be used as a direct replacement for the DMT6012LFDF-13?

A: Yes. The DMT6012LFDF-7 is a parametric equivalent with identical electrical specifications, thermal ratings, and package geometry. Pin-for-pin substitution is valid without circuit redesign.

Q: Are there any differences in the 6-UDFN package between these parts?

A: No. Both devices use the identical 6-UDFN Exposed Pad package (U-DFN2020-6 Type F) with surface mount configuration. PCB layout and thermal management considerations remain unchanged.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the DMT6012LFDF-13 and DMT6012LFDF-7 are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and maintain REACH Unaffected status.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is determined by matching Vdss (60V), continuous drain current (9.5A), on-state resistance (14mOhm @ 8.5A, 10V), gate threshold voltage (2.3V), gate charge (13.6nC), and input capacitance (785pF). All parameters are identical between these parts.

Q: Is there a difference in thermal performance between these devices?

A: No. Both parts have identical power dissipation ratings of 900mW (Ta) and 11W (Tc), with operating temperature range from -55°C to 150°C.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The DMT6012LFDF-7 and DMT6012LFDF-13 are fully interchangeable. No modifications to PCB layout, gate drive circuitry, or thermal management are required.