DMT6005LFG-13 Equivalent & Substitute Parts

Part Overview

The DMT6005LFG-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with continuous drain current capability of 18A at Ta and 100A at Tc. This device is housed in a 8-PowerVDFN surface mount package and is designed for power switching applications requiring efficient thermal management and low on-resistance characteristics. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when electrical parameters, mechanical packaging, and thermal characteristics remain within specification tolerances for direct circuit board replacement without design modification.

Substiute Parts

DMT6005LFG-13

Diodes IncorporatedIn Stock: 9269DMT6005LFG-13 Datasheet

Current PartRFQ

DMT6005LFG-7

Diodes IncorporatedIn Stock: 5393DMT6005LFG-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMT6005LFG-13 is determined by equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 60V
• Continuous Drain Current: 18A (Ta), 100A (Tc)
• On-Resistance (Rds On): 4.1 mOhm @ 20A, 10V
• Gate Threshold Voltage: 2.5V @ 250µA
• Gate Charge: 48.7 nC @ 10V
• Input Capacitance: 3150 pF @ 30V
• Maximum Gate Voltage: ±20V
• Operating Temperature Range: -55°C to 150°C

Mechanical Equivalence Criteria:

• Package Type: 8-PowerVDFN (PowerDI3333-8)
• Mounting Type: Surface Mount
• Supplier Device Package: PowerDI3333-8

Compliance Equivalence Criteria:

• RoHS3 Compliance
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Product Status: Active

The DMT6005LFG-7 meets all specified electrical, mechanical, and compliance parameters and is classified as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the DMT6005LFG-13 and DMT6005LFG-7 are Active products manufactured by Diodes Incorporated with identical electrical specifications and mechanical packaging. Selection between these parts is based on inventory availability and supply chain considerations rather than technical performance differences.

DMT6005LFG-13 is the primary part number with 9,176 pieces in stock.

DMT6005LFG-7 is the parametric equivalent substitute with 5,300 pieces in stock and serves as an alternative when primary part availability is constrained.

Both parts maintain full RoHS3 compliance, REACH Unaffected status, and unlimited moisture sensitivity rating (MSL 1), making them suitable for applications requiring environmental and regulatory compliance. The identical electrical parameters, on-resistance characteristics, thermal ratings, and gate charge specifications ensure direct functional interchangeability in circuit applications without design modification or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can DMT6005LFG-7 be used as a direct replacement for DMT6005LFG-13 in production?

A: Yes. The DMT6005LFG-7 is a parametric equivalent with identical electrical specifications, on-resistance, gate charge, input capacitance, and thermal characteristics. Both parts use the same 8-PowerVDFN package and mounting type, enabling direct board-level substitution without circuit redesign.

Q: Are there differences in the PowerDI3333-8 package between these part numbers?

A: No. Both the DMT6005LFG-13 and DMT6005LFG-7 use the identical 8-PowerVDFN (PowerDI3333-8) surface mount package with the same pinout, thermal properties, and mechanical dimensions.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS3 compliant, REACH Unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. They are functionally equivalent from a regulatory and environmental compliance perspective.

Q: What is the difference between the DMT6005LFG-13 and DMT6005LFG-7 designations?

A: The suffix designations (-13 and -7) represent different manufacturing date codes or tape reel configurations within the same base product number (DMT6005). The electrical and mechanical specifications are identical.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since both parts are parametrically equivalent with identical specifications, they can be used interchangeably within the same circuit design and production batch without performance variation or compatibility issues.

Q: What is the continuous drain current rating for this MOSFET?

A: The continuous drain current is 18A at Ta (ambient temperature) and 100A at Tc (case temperature). The higher Tc rating reflects the device's capability under direct thermal management conditions.

Q: Is the 4.1 mOhm on-resistance specification guaranteed across both part numbers?

A: Yes. Both DMT6005LFG-13 and DMT6005LFG-7 specify Rds On (Max) of 4.1 mOhm at 20A drain current and 10V gate-source voltage, ensuring consistent power dissipation and thermal performance.