DMT10H015LCG-13 Equivalent & Substitute Parts

Part Overview

The DMT10H015LCG-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 100V drain-to-source voltage with continuous drain current capabilities of 9.4A at Ta and 34A at Tc. This surface mount device is packaged in an 8-PowerVDFN (V-DFN3333-8) configuration and is designed for general-purpose switching and amplification applications requiring moderate power dissipation in compact form factors.

The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain performance specifications across manufacturing lots and procurement cycles.

Substiute Parts

DMT10H015LCG-13

Diodes IncorporatedIn Stock: 1125DMT10H015LCG-13 Datasheet

Current PartRFQ

DMT10H015LCG-7

Diodes IncorporatedIn Stock: 4784DMT10H015LCG-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMT10H015LCG-13 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 100V
• Continuous Drain Current (Id): 9.4A (Ta), 34A (Tc)
• On-State Resistance (Rds On): 15mOhm @ 20A, 10V
• Gate Threshold Voltage (Vgs(th)): 3.5V @ 250µA
• Gate Charge (Qg): 33.3nC @ 10V
• Input Capacitance (Ciss): 1871pF @ 50V
• Maximum Power Dissipation: 1W (Ta)
• Operating Temperature Range: -55°C to 155°C (TJ)

Mechanical & Packaging Equivalence Criteria:

• Mounting Type: Surface Mount
• Package Configuration: 8-PowerVDFN (V-DFN3333-8)
• Pin Count: 8

Compliance & Regulatory Equivalence Criteria:

• RoHS3 Compliance
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Product Status: Active

Parts meeting all electrical, mechanical, and compliance parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The DMT10H015LCG-7 is a direct parametric equivalent to the DMT10H015LCG-13. Both parts are manufactured by Diodes Incorporated and share identical electrical specifications, mechanical packaging, and regulatory compliance status.

Selection Basis:

Both parts maintain Active product status, ensuring long-term availability and manufacturing support. Both are RoHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for industrial and commercial applications. The MSL 1 (Unlimited) rating on both parts indicates minimal moisture sensitivity, reducing handling and storage constraints.

The DMT10H015LCG-7 currently maintains higher inventory availability (4702 pieces) compared to the DMT10H015LCG-13 (1033 pieces), making it suitable for high-volume procurement and extended lead-time mitigation strategies.

No electrical, thermal, or mechanical performance differential exists between these parts. Selection between them is determined by supply chain availability, procurement timing, and inventory management requirements.

Frequently Asked Questions (FAQ)

Q: Can the DMT10H015LCG-7 be used as a direct replacement for the DMT10H015LCG-13 in existing designs?

A: Yes. The DMT10H015LCG-7 is a parametric equivalent with identical electrical specifications, gate charge characteristics, on-state resistance, and thermal ratings. Both parts use the same 8-PowerVDFN (V-DFN3333-8) package with identical pin configurations. No circuit modifications or PCB layout changes are required.

Q: Are there any differences in gate drive requirements between these parts?

A: No. Both parts share identical gate threshold voltage (Vgs(th) = 3.5V @ 250µA), gate charge (Qg = 33.3nC @ 10V), and input capacitance (Ciss = 1871pF @ 50V). Gate driver circuits designed for the DMT10H015LCG-13 operate identically with the DMT10H015LCG-7.

Q: Do these parts have the same thermal performance?

A: Yes. Both parts are rated for identical maximum power dissipation (1W @ Ta), continuous drain current (9.4A @ Ta, 34A @ Tc), and operating temperature range (-55°C to 155°C TJ). Thermal management strategies and heat sink requirements remain unchanged.

Q: What is the significance of the different part number suffixes (-13 vs. -7)?

A: The suffix designates different manufacturing tape reel configurations or packaging lot identifiers within the same electrical and mechanical specification. The electrical and functional performance is identical. The suffix does not indicate performance, quality, or reliability differences.

Q: Are both parts suitable for high-frequency switching applications?

A: Yes. Both parts have identical gate charge (33.3nC @ 10V) and input capacitance (1871pF @ 50V) specifications, making them suitable for switching frequencies within the design envelope of the original specification. Switching frequency capability is determined by these parameters, which are identical across both parts.

Q: Do these parts require different PCB layout or thermal management approaches?

A: No. Both parts use the identical 8-PowerVDFN package with the same thermal pad configuration and pin layout. PCB layout, thermal vias, and heat dissipation strategies designed for the DMT10H015LCG-13 apply directly to the DMT10H015LCG-7 without modification.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating. Regulatory and environmental compliance requirements are satisfied identically by both parts.