DMPH3010LPS-13 Equivalent & Substitute Parts

Part Overview

The DMPH3010LPS-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage and 60A continuous drain current at 25°C. This device is housed in an 8-PowerTDFN surface mount package and is designed for power switching applications requiring low on-resistance performance. The part is currently in active production status with 874 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same package type and performance envelope. This ensures direct functional replacement without circuit redesign or thermal management modifications.

Substiute Parts

DMPH3010LPS-13

Diodes IncorporatedIn Stock: 888DMPH3010LPS-13 Datasheet

Current PartRFQ

DMPH3010LPSQ-13

Diodes IncorporatedIn Stock: 853DMPH3010LPSQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of P-Channel MOSFETs is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 30V
• Continuous Drain Current (Id): 60A at 25°C
• On-Resistance (Rds On): 7.5 mOhm maximum at specified gate voltage
• Gate Threshold Voltage (Vgs(th)): 2.1V at 250µA
• Gate Charge (Qg): 139 nC at 10V
• Power Dissipation: 2.6W at ambient temperature

Mechanical Equivalence Criteria:

• Package Type: 8-PowerTDFN
• Mounting: Surface Mount
• Tape & Reel packaging format

Compliance Equivalence Criteria:

• RoHS3 Compliance
• Moisture Sensitivity Level (MSL): 1
• REACH Unaffected status

The DMPH3010LPSQ-13 meets all electrical and mechanical parameters identical to the primary part. The distinction between these parts is the addition of AEC-Q101 automotive qualification in the substitute variant, which does not alter functional equivalence for non-automotive applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (DMPH3010LPS-13): Select this part for general-purpose industrial and consumer applications where automotive qualification is not required. The part maintains active production status with adequate inventory availability (874 units in stock). Full RoHS3 compliance and unlimited moisture sensitivity rating support standard manufacturing and storage conditions.

Substitute Part Selection (DMPH3010LPSQ-13): The DMPH3010LPSQ-13 is electrically and mechanically identical to the primary part with the addition of AEC-Q101 automotive qualification. This qualification certifies the device for automotive-grade reliability and testing standards. Select this variant for applications requiring automotive-grade components or when sourcing from automotive supply chains. Current inventory is 817 units in stock.

Both parts are manufactured by Diodes Incorporated and share identical electrical performance characteristics, package geometry, and compliance certifications. Selection between these variants depends solely on application requirements for automotive qualification, not on functional performance or thermal characteristics.

Frequently Asked Questions (FAQ)

Q: Can DMPH3010LPSQ-13 be used as a direct replacement for DMPH3010LPS-13?

A: Yes. The DMPH3010LPSQ-13 is a direct functional equivalent with identical electrical parameters, on-resistance, gate charge, and power dissipation ratings. The only difference is the addition of AEC-Q101 automotive qualification. No circuit modifications or thermal management changes are required.

Q: What is the significance of the AEC-Q101 qualification on the DMPH3010LPSQ-13?

A: AEC-Q101 is an automotive industry standard qualification that certifies the device has undergone specific reliability testing and quality assurance protocols required for automotive applications. For non-automotive applications, this qualification does not affect device performance or functionality.

Q: Are both parts available in the same package type?

A: Yes. Both DMPH3010LPS-13 and DMPH3010LPSQ-13 are supplied in the 8-PowerTDFN surface mount package with identical pin configuration and PCB footprint. No layout modifications are necessary when substituting between these parts.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is based on matching Drain-to-Source Voltage (30V), Continuous Drain Current (60A), On-Resistance (7.5 mOhm), Gate Threshold Voltage (2.1V), Gate Charge (139 nC), and Power Dissipation (2.6W). All these parameters are identical between the primary and substitute parts.

Q: Can these P-Channel MOSFETs be used in high-temperature applications?

A: Yes. Both parts are rated for operating junction temperatures from -55°C to 175°C, supporting high-temperature industrial and automotive environments within this range.

Q: What is the moisture sensitivity level, and does it affect handling?

A: Both parts carry MSL 1 (Unlimited) rating, indicating unlimited shelf life without moisture bake-out requirements. Standard dry storage conditions are sufficient for component preservation.

Q: Are there any compliance or regulatory differences between these parts?

A: Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99. The DMPH3010LPSQ-13 includes additional AEC-Q101 automotive qualification, but this does not restrict use in non-automotive applications.