DMP6250SFDF-7 Equivalent & Substitute Parts

Part Overview

The DMP6250SFDF-7 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 3.2A continuous drain current at 25°C. The device is packaged in a 6-UDFN Exposed Pad surface mount configuration and dissipates a maximum of 800mW at ambient temperature. This component is classified as Active product status and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or when enhanced performance characteristics within the same functional category are required while maintaining electrical and mechanical compatibility.

Substiute Parts

DMP6250SFDF-7

Diodes IncorporatedIn Stock: 1084DMP6250SFDF-7 Datasheet

Current PartRFQ

DMP6250SFDF-13

Diodes IncorporatedIn Stock: 927DMP6250SFDF-13 Datasheet

Parametric EquivalentRFQ

BUK6D120-60PX

Nexperia USA Inc.In Stock: 2440BUK6D120-60PX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMP6250SFDF-7 are classified into two categories based on substitution criteria:

Parametric Equivalent: Parts that maintain identical electrical specifications and package configuration, enabling direct replacement without circuit modification.

Manufacturer Recommended: Parts that exceed or match the primary electrical specifications while offering enhanced performance characteristics, compatible package footprints, and additional qualification certifications.

Substitution eligibility is determined by the following key parameters:

• Matching FET Type (P-Channel)
• Drain-to-Source Voltage (Vdss) rating of 60V or higher
• Continuous Drain Current (Id) rating of 3.2A or greater at 25°C
• Gate Threshold Voltage (Vgs(th)) compatibility within specified range
• Surface Mount package configuration with 6-pin UDFN Exposed Pad footprint
• Operating temperature range encompassing -55°C to 150°C minimum
• ROHS3 compliance and MSL 1 rating

Parameter Comparison

Engineering Selection Recommendations

DMP6250SFDF-13 (Parametric Equivalent): This part is manufactured by Diodes Incorporated and maintains identical electrical specifications and package configuration to the DMP6250SFDF-7. Both devices are ROHS3 compliant with MSL 1 rating and Active product status. The DMP6250SFDF-13 serves as a direct functional replacement with no circuit design modifications required. Selection of this substitute is appropriate when primary sourcing is unavailable while maintaining equivalent performance characteristics.

BUK6D120-60PX (Manufacturer Recommended): This part is manufactured by Nexperia USA Inc. and represents an enhanced alternative within the TrenchMOS™ series. The BUK6D120-60PX maintains the 60V Vdss rating and exceeds the continuous drain current specification with 3A at Ta and 8A at Tc. The device demonstrates improved on-resistance performance (120mOhm versus 155mOhm) and higher power dissipation capability (2.3W at Ta, 15W at Tc versus 0.8W at Ta). The BUK6D120-60PX is qualified to AEC-Q101 automotive standards and extends the operating temperature range to 175°C. This part is suitable for applications requiring enhanced thermal performance, automotive-grade qualification, or extended temperature operation while maintaining the same 6-UDFN Exposed Pad surface mount package footprint. All three devices are ROHS3 compliant with MSL 1 rating and Active product status.

Frequently Asked Questions (FAQ)

Q: Can the DMP6250SFDF-13 be used as a direct replacement for the DMP6250SFDF-7?

A: Yes. The DMP6250SFDF-13 is a parametric equivalent with identical electrical specifications, including 60V Vdss, 3.2A continuous drain current, 155mOhm on-resistance, and the same 6-UDFN Exposed Pad package configuration. No circuit modifications are required for substitution.

Q: What are the key differences between the DMP6250SFDF-7 and the BUK6D120-60PX?

A: The BUK6D120-60PX offers improved on-resistance (120mOhm versus 155mOhm), higher power dissipation capability (2.3W at Ta versus 0.8W at Ta), extended operating temperature range (-55°C to 175°C versus -55°C to 150°C), and AEC-Q101 automotive qualification. Both devices maintain 60V Vdss rating and 6-UDFN Exposed Pad package compatibility.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. The DMP6250SFDF-7, DMP6250SFDF-13, and BUK6D120-60PX all use the 6-UDFN Exposed Pad surface mount package configuration, enabling direct PCB footprint compatibility without layout modifications.

Q: Which substitute part should be selected for automotive applications?

A: The BUK6D120-60PX is qualified to AEC-Q101 automotive standards and is the appropriate selection for automotive-grade applications. The DMP6250SFDF-7 and DMP6250SFDF-13 do not carry automotive qualification designations.

Q: What is the moisture sensitivity level for all three parts?

A: All three parts carry MSL 1 (Unlimited) moisture sensitivity rating, indicating no moisture sensitivity restrictions during storage and handling.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The DMP6250SFDF-7, DMP6250SFDF-13, and BUK6D120-60PX are all ROHS3 compliant and REACH unaffected.

Q: Can the BUK6D120-60PX be used in applications with temperature requirements exceeding 150°C?

A: Yes. The BUK6D120-60PX extends the maximum operating temperature to 175°C (TJ), making it suitable for applications requiring operation above the 150°C limit of the DMP6250SFDF-7 and DMP6250SFDF-13.