DMP6110SVT-13 Equivalent & Substitute Parts

Part Overview

The DMP6110SVT-13 is a P-Channel MOSFET rated for 60V drain-to-source voltage with 7.3A continuous drain current at 25°C. Manufactured by Diodes Incorporated, this surface mount device is packaged in TSOT-23-6 and supplied in Tape & Reel format. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set. Alternative packaging formats or inventory availability may necessitate component substitution in production environments.

Substiute Parts

DMP6110SVT-13

Diodes IncorporatedIn Stock: 848DMP6110SVT-13 Datasheet

Current PartRFQ

DMP6110SVT-7

Diodes IncorporatedIn Stock: 13622DMP6110SVT-7 Datasheet

Parametric EquivalentRFQ

FDC5614P

onsemiIn Stock: 25038FDC5614P Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical electrical and mechanical parameters:

Electrical Matching Criteria:

• Drain to Source Voltage (Vdss): 60V minimum
• Gate-Source Voltage (Vgs): ±20V maximum rating
• Operating Temperature Range: -55°C to 150°C (TJ)
• FET Type: P-Channel MOSFET technology
• RoHS3 Compliance and REACH Unaffected status

Mechanical Matching Criteria:

• Package Type: SOT-23-6 Thin or TSOT-23-6 compatible footprint
• Mounting Type: Surface Mount
• Moisture Sensitivity Level: 1 (Unlimited)

Parametric Equivalent Classification: Parts meeting all electrical and mechanical criteria with identical or superior performance characteristics in continuous drain current, on-resistance, and gate charge are classified as parametric equivalents.

Manufacturer Recommended Classification: Parts meeting core electrical and mechanical criteria but with performance variations in specific parameters (such as reduced continuous drain current or increased gate charge) are classified as manufacturer recommended alternatives.

Parameter Comparison

Engineering Selection Recommendations

DMP6110SVT-7 (Parametric Equivalent)

The DMP6110SVT-7 is a direct parametric equivalent to the DMP6110SVT-13. Both parts are manufactured by Diodes Incorporated and share identical electrical specifications including 60V Vdss, 7.3A continuous drain current, 105mOhm on-resistance, and 17.2nC gate charge. The primary distinction is packaging format: DMP6110SVT-7 is supplied in Cut Tape and Digi-Reel format, while DMP6110SVT-13 is supplied in Tape & Reel. Both maintain Active product status, ROHS3 compliance, and unlimited moisture sensitivity rating. Selection between these variants depends on packaging and supply chain requirements rather than electrical performance.

FDC5614P (Manufacturer Recommended Alternative)

The FDC5614P is manufactured by onsemi and operates within the PowerTrench series. This part maintains the 60V Vdss rating and ±20V Vgs maximum specification, with identical gate threshold voltage and on-resistance characteristics at rated current. However, the FDC5614P is rated for 3A continuous drain current compared to the 7.3A rating of the DMP6110SVT-13. The FDC5614P exhibits increased gate charge (24nC versus 17.2nC) and higher power dissipation capability (1.6W versus 1.2W). This part is suitable for applications where continuous drain current requirements do not exceed 3A. The FDC5614P maintains Active product status, ROHS3 compliance, and unlimited moisture sensitivity rating. Package compatibility is maintained across all three parts in the SOT-23-6 Thin footprint.

Frequently Asked Questions (FAQ)

Q: Can DMP6110SVT-7 be used as a direct replacement for DMP6110SVT-13?

A: Yes. The DMP6110SVT-7 is a parametric equivalent with identical electrical specifications. Both parts share the same base product number (DMP6110), manufacturer (Diodes Incorporated), and performance characteristics. The difference is packaging format only: DMP6110SVT-7 uses Cut Tape and Digi-Reel supply, while DMP6110SVT-13 uses Tape & Reel supply.

Q: What are the current limitations when using FDC5614P as a substitute?

A: The FDC5614P is rated for 3A continuous drain current, compared to 7.3A for the DMP6110SVT-13. Applications requiring continuous drain current above 3A must use the DMP6110SVT-13 or DMP6110SVT-7. The FDC5614P is suitable only for circuits with maximum continuous drain current of 3A or less.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts use the SOT-23-6 Thin package format and are compatible with identical surface mount PCB footprints. No layout modifications are required when substituting between these parts.

Q: Do all substitute parts maintain the same compliance certifications?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry unlimited moisture sensitivity rating (MSL 1). All parts maintain Active product status and are suitable for current production applications.

Q: What is the difference in gate charge between the parts?

A: The DMP6110SVT-13 and DMP6110SVT-7 both specify 17.2nC gate charge at 10V. The FDC5614P specifies 24nC gate charge at 10V. Higher gate charge results in increased switching losses in gate drive circuits. Applications with tight gate drive timing requirements should account for this difference.

Q: Can FDC5614P be used in high-current applications designed for DMP6110SVT-13?

A: No. The FDC5614P is rated for 3A continuous drain current and cannot be used in applications requiring the full 7.3A capability of the DMP6110SVT-13. Exceeding the rated continuous drain current will result in device failure.

Q: Are there differences in operating temperature range between the parts?

A: No. All three parts operate across the identical temperature range of -55°C to 150°C (TJ). Temperature performance is equivalent across all substitute options.