DMP610DL-13 Equivalent & Substitute Parts

Part Overview

The DMP610DL-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-23-3 package. This device operates at a drain-to-source voltage rating of 60V with a continuous drain current of 180mA at 25°C and maximum power dissipation of 310mW. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified to provide design flexibility when the primary part number becomes unavailable or when inventory constraints require alternative sourcing from the same manufacturer's product line.

Substiute Parts

DMP610DL-13

Diodes IncorporatedIn Stock: 1071DMP610DL-13 Datasheet

Current PartRFQ

DMP610DL-7

Diodes IncorporatedIn Stock: 6604DMP610DL-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The DMP610DL-13 and its identified substitute, DMP610DL-7, share the same base product number (DMP610) and are classified as parametric equivalents. Both parts are functionally interchangeable based on the following critical parameters:

Electrical Equivalence Criteria:

• Identical FET type (P-Channel) and technology (MOSFET Metal Oxide)
• Matching drain-to-source voltage rating (60V)
• Identical continuous drain current specification (180mA @ 25°C)
• Identical on-resistance specification (10 Ohm @ 100mA, 5V)
• Matching gate threshold voltage (2V @ 1mA)
• Identical gate charge (0.56 nC @ 10V)
• Matching input capacitance (24.6 pF @ 25V)
• Identical power dissipation rating (310mW)
• Identical operating temperature range (-55°C to 150°C)

Mechanical and Packaging Equivalence:

• Same package designation (SOT-23-3, TO-236-3, SC-59)
• Identical mounting type (Surface Mount)
• Same tape and reel packaging format

Compliance and Regulatory Equivalence:

• Both parts maintain ROHS3 compliance
• Both parts are REACH unaffected
• Both parts carry MSL 1 (unlimited) moisture sensitivity level
• Identical ECCN and HTSUS classifications

Parameter Comparison

Engineering Selection Recommendations

Both the DMP610DL-13 and DMP610DL-7 are active production parts from Diodes Incorporated with full regulatory compliance. Selection between these parts is based on inventory availability and supply chain considerations rather than electrical or mechanical differences.

The DMP610DL-13 carries current inventory of 1033 pieces. The DMP610DL-7 carries current inventory of 6580 pieces, providing greater availability for high-volume applications or extended lead-time requirements.

Both parts maintain identical electrical performance across all specified parameters, including voltage rating, current capacity, on-resistance, and thermal characteristics. Both parts are certified for ROHS3 compliance and carry unlimited moisture sensitivity level (MSL 1), eliminating any compliance or handling restrictions that would differentiate their application suitability.

Direct substitution is supported without circuit redesign, PCB layout modification, or thermal management recalculation.

Frequently Asked Questions (FAQ)

Q: Can DMP610DL-7 be used as a direct replacement for DMP610DL-13 in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, package type (SOT-23-3), and mounting configuration (surface mount). No circuit modifications are required.

Q: Are there any differences in on-resistance or thermal performance between these parts?

A: No. Both parts specify identical on-resistance (10 Ohm @ 100mA, 5V) and power dissipation rating (310mW). Thermal performance in equivalent circuit applications is identical.

Q: Do both parts support the same operating temperature range?

A: Yes. Both the DMP610DL-13 and DMP610DL-7 operate across the identical temperature range of -55°C to 150°C (junction temperature).

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts carry ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity level. Handling, storage, and regulatory requirements are identical.

Q: What is the difference between the DMP610DL-13 and DMP610DL-7 part numbers?

A: The suffix designations (-13 and -7) represent different manufacturing date codes or tape reel configurations from Diodes Incorporated. Electrical and mechanical specifications are identical.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts use the SOT-23-3 package with identical pin configuration and footprint. PCB layouts, solder reflow profiles, and assembly processes require no modification.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection is based on supplier inventory availability and lead time requirements. The DMP610DL-7 currently carries higher inventory (6580 pieces versus 1033 pieces).