DMP4011SPS-13 Equivalent & Substitute Parts

Part Overview

The DMP4011SPS-13 is an active P-Channel MOSFET manufactured by Diodes Incorporated, rated for 40V drain-to-source voltage with continuous drain current capability of 11.7A (Ta) and 76A (Tc). This device is housed in a PowerDI5060-8 surface mount package and is designed for power switching applications requiring compact form factors and efficient thermal management.

The DMP4011SPS-13 is classified as an active product with full RoHS3 compliance and REACH unaffected status. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and package specifications are maintained across the device family.

Substiute Parts

DMP4011SPS-13

Diodes IncorporatedIn Stock: 1002DMP4011SPS-13 Datasheet

Current PartRFQ

DMP4011SPSQ-13

Diodes IncorporatedIn Stock: 2803DMP4011SPSQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMP4011SPS-13 are identified based on strict parametric equivalence across the following critical specifications:

Electrical Parameters (Must Match):

• Drain to Source Voltage (Vdss): 40V
• Continuous Drain Current (Id): 11.7A (Ta), 76A (Tc)
• On-State Resistance (Rds On): 11mOhm @ 9.8A, 10V
• Gate Threshold Voltage (Vgs(th)): 2.5V @ 250µA
• Gate Charge (Qg): 52nC @ 10V
• Maximum Gate Voltage (Vgs): ±20V
• Input Capacitance (Ciss): 2747pF @ 20V
• Power Dissipation: 1.3W (Ta)

Mechanical & Package Parameters (Must Match):

• FET Type: P-Channel
• Technology: MOSFET (Metal Oxide)
• Mounting Type: Surface Mount
• Package / Case: 8-PowerTDFN
• Supplier Device Package: PowerDI5060-8

Compliance & Environmental Parameters (Must Match):

• Operating Temperature Range: -55°C to 150°C (TJ)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Substitutes are grouped into two categories: Parametric Equivalents (identical electrical and mechanical specifications) and Qualified Variants (parametric equivalents with additional automotive qualification).

Parameter Comparison

Engineering Selection Recommendations

DMP4011SPS-13 (Standard Grade)

The DMP4011SPS-13 is suitable for general-purpose power switching applications where standard industrial compliance is required. This part carries full RoHS3 compliance and REACH unaffected status, meeting environmental regulatory requirements for consumer and industrial electronics. The device is actively manufactured and maintained in production inventory.

DMP4011SPSQ-13 (Automotive Grade)

The DMP4011SPSQ-13 is the automotive-qualified variant of the DMP4011SPS-13, carrying AEC-Q101 qualification in addition to all standard compliance certifications. This part is electrically and mechanically identical to the standard grade variant and is suitable for automotive applications requiring formal qualification documentation. The DMP4011SPSQ-13 maintains the same electrical performance, package specifications, and environmental operating range as the standard grade part.

Selection Criteria:

• Standard Industrial Applications: Select DMP4011SPS-13
• Automotive Applications: Select DMP4011SPSQ-13 (AEC-Q101 qualified)
• Interchangeability: Both parts are pin-compatible and electrically equivalent within the PowerDI5060-8 package footprint

Both parts are active products with established supply chains and are suitable for new design implementations.

Frequently Asked Questions (FAQ)

Q: Are DMP4011SPS-13 and DMP4011SPSQ-13 electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including Vdss (40V), continuous drain current (11.7A Ta / 76A Tc), Rds On (11mOhm @ 9.8A, 10V), gate charge (52nC @ 10V), and all other parametric ratings. They operate across the same temperature range (-55°C to 150°C TJ) and are functionally equivalent in circuit applications.

Q: What is the difference between DMP4011SPS-13 and DMP4011SPSQ-13?

A: The primary difference is qualification status. The DMP4011SPSQ-13 carries AEC-Q101 automotive qualification, while the DMP4011SPS-13 is standard industrial grade. Both parts are manufactured by Diodes Incorporated using identical MOSFET technology and are housed in the same 8-PowerTDFN PowerDI5060-8 package. Electrical performance and compliance certifications (RoHS3, REACH) are identical.

Q: Can I use DMP4011SPSQ-13 in place of DMP4011SPS-13?

A: Yes. The DMP4011SPSQ-13 is a direct substitute for DMP4011SPS-13 in all applications. The automotive qualification does not restrict use in standard industrial applications. Pin configuration, package footprint, and electrical characteristics are identical.

Q: Can I use DMP4011SPS-13 in automotive applications?

A: The DMP4011SPS-13 is not AEC-Q101 qualified. For automotive applications requiring formal qualification documentation, the DMP4011SPSQ-13 is the appropriate selection. However, the electrical and mechanical specifications are identical.

Q: What package type is used for both parts?

A: Both DMP4011SPS-13 and DMP4011SPSQ-13 use the 8-PowerTDFN package (PowerDI5060-8 supplier device package). This is a surface mount package with identical pin configuration and PCB footprint for both variants.

Q: Are both parts RoHS3 compliant?

A: Yes. Both DMP4011SPS-13 and DMP4011SPSQ-13 are ROHS3 compliant and REACH unaffected, meeting environmental regulatory requirements for electronics manufacturing and distribution.

Q: What is the moisture sensitivity level for these parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating unlimited shelf life under standard storage conditions without moisture bake-out requirements prior to assembly.

Q: Are both parts currently in production?

A: Yes. Both DMP4011SPS-13 and DMP4011SPSQ-13 are classified as active products with established manufacturing and supply chain support from Diodes Incorporated.