DMP3056L-13 Equivalent & Substitute Parts

Part Overview

The DMP3056L-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with a continuous drain current of 4.3A at 25°C. The device is housed in a SOT-23-3 surface mount package and dissipates a maximum of 1.38W. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, packaging format preferences, or supply chain considerations.

Substiute Parts

DMP3056L-13

Diodes IncorporatedIn Stock: 10212DMP3056L-13 Datasheet

Current PartRFQ

DMP3056L-7

Diodes IncorporatedIn Stock: 77338DMP3056L-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMP3056L-13 with equivalent parts is determined by strict electrical and mechanical parameter matching. The following criteria establish substitution validity:

Electrical Parameters (Must Match):

• FET Type: P-Channel
• Drain to Source Voltage (Vdss): 30V
• Continuous Drain Current (Id) @ 25°C: 4.3A (Ta)
• Rds On (Max) @ 6A, 10V: 50mOhm
• Vgs(th) (Max) @ 250µA: 2.1V
• Gate Charge (Qg) (Max) @ 10V: 11.8nC
• Input Capacitance (Ciss) (Max) @ 25V: 642pF
• Power Dissipation (Max): 1.38W (Ta)
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match):

• Package Type: SOT-23-3 (TO-236-3, SC-59)
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

The DMP3056L-7 qualifies as a parametric equivalent substitute because it maintains identical electrical specifications and mechanical compatibility while differing only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel).

Parameter Comparison

Engineering Selection Recommendations

Both the DMP3056L-13 and DMP3056L-7 are Active product status components manufactured by Diodes Incorporated. Selection between these parts is based on packaging and supply requirements rather than electrical performance.

DMP3056L-13 (Tape & Reel): Select this part number when high-volume automated assembly processes require continuous reel feeding. Current inventory: 10,136 pieces.

DMP3056L-7 (Cut Tape & Digi-Reel®): Select this part number when lower-volume applications, manual assembly, or mixed-component kitting is required. Current inventory: 77,300 pieces.

Both parts maintain identical electrical characteristics, thermal performance, and compliance certifications (ROHS3, REACH Unaffected). The SOT-23-3 package footprint is mechanically identical across both part numbers, ensuring PCB layout compatibility without modification.

Frequently Asked Questions (FAQ)

Q: Can DMP3056L-7 be used as a direct replacement for DMP3056L-13 in existing designs?

A: Yes. The DMP3056L-7 is electrically and mechanically equivalent to the DMP3056L-13. All electrical parameters, thermal ratings, and operating characteristics are identical. The only difference is the packaging format (Cut Tape & Digi-Reel® versus Tape & Reel). PCB footprints and assembly processes remain unchanged.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for high-speed automated pick-and-place equipment. Cut Tape (CT) & Digi-Reel® packaging provides components in smaller quantities on cut tape segments, suitable for lower-volume production, prototyping, or manual assembly. Both formats contain the same component in the same SOT-23-3 package.

Q: Are there any thermal or electrical performance differences between these part numbers?

A: No. Both DMP3056L-13 and DMP3056L-7 have identical drain-to-source voltage (30V), continuous drain current (4.3A), on-resistance (50mOhm @ 6A, 10V), gate charge (11.8nC), and power dissipation (1.38W). Operating temperature range is -55°C to 150°C for both parts.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the DMP3056L-13 and DMP3056L-7 are ROHS3 compliant, REACH unaffected, and have Moisture Sensitivity Level 1 (Unlimited). Compliance certifications are identical.

Q: Which part should be selected for new design projects?

A: Selection depends on production volume and assembly method. For high-volume automated manufacturing, DMP3056L-13 (Tape & Reel) is standard. For prototyping, low-volume production, or mixed-component assembly, DMP3056L-7 (Cut Tape & Digi-Reel®) is appropriate. Both are Active status products with equivalent performance.

Q: Is the SOT-23-3 package footprint identical for both part numbers?

A: Yes. Both parts use the SOT-23-3 package (also designated TO-236-3 or SC-59). PCB layout, land patterns, and assembly processes are identical. No design modifications are required when substituting between these part numbers.