DMP3017SFV-13 Equivalent & Substitute Parts

Part Overview

The DMP3017SFV-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 40A continuous drain current at 25°C. This device is housed in a Surface Mount PowerDI3333-8 package and is designed for high-current switching applications requiring low on-resistance performance. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter tolerances while maintaining the same package footprint and thermal characteristics. Alternative models may be required due to inventory availability, application-specific current requirements, or thermal management constraints.

Substiute Parts

DMP3017SFV-13

Diodes IncorporatedIn Stock: 9462DMP3017SFV-13 Datasheet

Current PartRFQ

DMP3013SFV-13

Diodes IncorporatedIn Stock: 1201DMP3013SFV-13 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DMP3017SFV-13 is determined by the following critical parameters:

Voltage Rating Compatibility: The substitute part must maintain a Drain-to-Source Voltage (Vdss) rating of 30V or greater to ensure safe operation within the same circuit topology.

Package Footprint: The substitute must use the 8-PowerVDFN package configuration to ensure mechanical and thermal compatibility with existing PCB layouts and thermal management solutions.

Channel Type and Technology: The substitute must be a P-Channel MOSFET using Metal Oxide Semiconductor technology to maintain functional equivalence in circuit operation.

Thermal and Compliance Requirements: The substitute must support the operating temperature range of -55°C to 150°C (TJ) and maintain RoHS3 compliance with MSL 1 rating.

On-Resistance Performance: The substitute's Rds On (Max) specification must not exceed the maximum allowable value to ensure acceptable power dissipation and thermal performance in the target application.

The DMP3013SFV-13 meets all substitution criteria while operating within the defined electrical and mechanical parameter boundaries.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (DMP3017SFV-13): This part is the specified component for applications requiring 40A continuous drain current at 25°C with 31W maximum power dissipation. The DMP3017SFV-13 maintains Active product status with full regulatory compliance (RoHS3, REACH Unaffected, EAR99 classification). Current inventory of 9400 pieces supports production requirements.

Substitute Selection (DMP3013SFV-13): The DMP3013SFV-13 is electrically and mechanically compatible for applications where the continuous drain current requirement does not exceed 12A at ambient temperature (Ta) or 35A at case temperature (Tc). This substitute offers superior on-resistance performance (9.5 mOhm versus 10 mOhm) and reduced gate charge (33.7 nC versus 41 nC), resulting in lower switching losses. The substitute maintains identical voltage rating (30V), package configuration (8-PowerVDFN), operating temperature range (-55°C to 150°C), and regulatory compliance. Available inventory of 1150 pieces in Tape & Reel packaging supports component procurement.

Both parts are manufactured by Diodes Incorporated and share identical thermal operating ranges and compliance certifications, ensuring functional interchangeability within the specified electrical parameter boundaries.

Frequently Asked Questions (FAQ)

Q: Can the DMP3013SFV-13 be used as a direct replacement for the DMP3017SFV-13 in all applications?

A: The DMP3013SFV-13 is electrically and mechanically compatible only for applications where the continuous drain current requirement does not exceed 12A at ambient temperature or 35A at case temperature. The DMP3017SFV-13 is rated for 40A continuous drain current at 25°C and is required for higher-current applications. Both parts share identical 30V voltage rating, 8-PowerVDFN package, and operating temperature range.

Q: What are the key electrical differences between these two parts?

A: The primary differences are continuous drain current rating (DMP3017SFV-13: 40A Tc versus DMP3013SFV-13: 12A Ta / 35A Tc) and power dissipation (DMP3017SFV-13: 31W Ta versus DMP3013SFV-13: 0.94W Ta). The DMP3013SFV-13 exhibits lower on-resistance (9.5 mOhm versus 10 mOhm), reduced gate charge (33.7 nC versus 41 nC), and lower input capacitance (1674 pF versus 2246 pF). Both maintain identical gate threshold voltage (3V @ 250µA) and maximum gate voltage (±25V).

Q: Are the package dimensions identical between these parts?

A: Both parts use the 8-PowerVDFN package configuration, ensuring identical PCB footprint and mechanical compatibility. The DMP3013SFV-13 is available in Tape & Reel (TR) packaging, while the DMP3017SFV-13 packaging specification is not detailed in the provided data.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the DMP3017SFV-13 and DMP3013SFV-13 are RoHS3 compliant, REACH unaffected, classified as EAR99, and carry MSL 1 (Unlimited) moisture sensitivity rating. Both maintain Active product status with identical operating temperature range (-55°C to 150°C TJ).

Q: What is the substitution logic for these P-Channel MOSFETs?

A: Substitution is based on matching Drain-to-Source Voltage (30V), package type (8-PowerVDFN), channel configuration (P-Channel MOSFET), operating temperature range (-55°C to 150°C), and compliance certifications. The substitute must not exceed the maximum on-resistance specification and must support the application's continuous drain current requirement. Both parts are manufactured by Diodes Incorporated, ensuring consistent quality and performance characteristics.