DMP3017SFG-13 Equivalent & Substitute Parts

Part Overview

The DMP3017SFG-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 11.5A continuous drain current at 25°C. This device is housed in a Surface Mount PowerDI3333-8 package and is designed for applications requiring moderate power dissipation (940mW at Ta). The part is currently classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain to Source Voltage (Vdss)	30	V
Current - Continuous Drain (Id) @ 25°C	11.5	A (Ta)
Rds On (Max) @ Id, Vgs	10	mOhm @ 11.5A, 10V
Power Dissipation (Max)	940	mW (Ta)
Operating Temperature Range	-55 to 150	°C (TJ)
Package / Case	8-PowerVDFN	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the DMP3017SFG-13 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Criteria:

FET Type: P-Channel topology
Drain to Source Voltage (Vdss): 30V minimum rating
Package / Case: 8-PowerVDFN (PowerDI3333-8 form factor)
Mounting Type: Surface Mount
Operating Temperature Range: -55°C to 150°C (TJ)

Performance Compatibility Criteria:

Continuous Drain Current (Id) @ 25°C: Equal to or greater than 11.5A
Rds On (Max): Equal to or lower than 10mOhm @ specified conditions
Power Dissipation (Max): Equal to or greater than 940mW

The DMP3013SFV-13 meets all mandatory matching criteria and exceeds performance specifications, making it a direct substitute for the obsolete DMP3017SFG-13.

Parameter Comparison

Parameter	DMP3017SFG-13 (Main Part)	DMP3013SFV-13 (Substitute)	Unit
Manufacturer	Diodes Incorporated	Diodes Incorporated	—
FET Type	P-Channel	P-Channel	—
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	30	30	V
Current - Continuous Drain (Id) @ 25°C	11.5 (Ta)	12 (Ta), 35 (Tc)	A
Drive Voltage (Max Rds On, Min Rds On)	4.5V, 10V	4.5V, 10V	V
Rds On (Max) @ Id, Vgs	10 @ 11.5A, 10V	9.5 @ 11.5A, 10V	mOhm
Vgs(th) (Max) @ Id	3 @ 250µA	3 @ 250µA	V
Gate Charge (Qg) (Max) @ Vgs	41 @ 10V	33.7 @ 10V	nC
Vgs (Max)	±25	±25	V
Input Capacitance (Ciss) (Max) @ Vds	2246 @ 15V	1674 @ 15V	pF
Power Dissipation (Max)	940 (Ta)	940 (Ta)	mW
Operating Temperature	-55 to 150	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	Surface Mount	—
Package / Case	8-PowerVDFN	8-PowerVDFN	—
Supplier Device Package	PowerDI3333-8	PowerDI3333-8 (Type UX)	—
Product Status	Obsolete	Active	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	—
REACH Status	REACH Unaffected	REACH Unaffected	—

Engineering Selection Recommendations

The DMP3013SFV-13 is the direct substitute for the obsolete DMP3017SFG-13. Selection is based on the following engineering factors:

Product Status Alignment: The DMP3013SFV-13 carries Active product status, ensuring continued availability and manufacturer support, whereas the DMP3017SFG-13 is Obsolete and subject to discontinuation.

Electrical Equivalence: Both devices share identical voltage ratings (30V Vdss), matching operating temperature ranges (-55°C to 150°C TJ), and equivalent power dissipation specifications (940mW Ta). The DMP3013SFV-13 provides improved performance with lower on-resistance (9.5mOhm versus 10mOhm) and reduced gate charge (33.7nC versus 41nC), resulting in lower switching losses and improved thermal efficiency.

Compliance Certification: Both parts maintain ROHS3 compliance, REACH Unaffected status, and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with current manufacturing and environmental standards.

Package Compatibility: Both devices utilize the 8-PowerVDFN Surface Mount package (PowerDI3333-8 form factor), enabling direct PCB layout compatibility without redesign.

Frequently Asked Questions (FAQ)

Q: Can the DMP3013SFV-13 be used as a direct replacement for the DMP3017SFG-13 without PCB modifications?

A: Yes. Both devices share identical package geometry (8-PowerVDFN PowerDI3333-8) and pin configuration, enabling direct substitution without PCB layout changes.

Q: What are the key performance differences between these two parts?

A: The DMP3013SFV-13 provides superior performance characteristics: lower on-resistance (9.5mOhm versus 10mOhm at 11.5A, 10V), reduced gate charge (33.7nC versus 41nC at 10V), and lower input capacitance (1674pF versus 2246pF at 15V). These improvements reduce conduction losses and switching losses in circuit operation.

Q: Are there any compliance or certification differences between the main part and substitute?

A: No. Both the DMP3017SFG-13 and DMP3013SFV-13 maintain identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and MSL Level 1 (Unlimited).

Q: What is the primary reason for substitution?

A: The DMP3017SFG-13 is classified as Obsolete, making it subject to discontinuation and limited availability. The DMP3013SFV-13 carries Active product status, ensuring long-term supply chain reliability and manufacturer support.

Q: Are the continuous drain current ratings equivalent?

A: The DMP3013SFV-13 provides higher continuous drain current (12A at Ta, 35A at Tc) compared to the DMP3017SFG-13 (11.5A at Ta), making it suitable for applications requiring equal or greater current handling capacity.

Q: Does the substitute part require different gate drive voltage?

A: No. Both devices share identical drive voltage specifications (4.5V and 10V for Max and Min Rds On conditions), ensuring compatibility with existing gate drive circuits.

Q: What is the difference between the PowerDI3333-8 and PowerDI3333-8 (Type UX) package designations?

A: Both designations refer to the same 8-PowerVDFN form factor with identical electrical and mechanical characteristics. The Type UX designation indicates a manufacturing variant of the same package family with no functional differences for substitution purposes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message