DMP2165UW-13 Equivalent & Substitute Parts

Part Overview

The DMP2165UW-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 20V drain-to-source voltage with 2.5A continuous drain current at 25°C. The device is housed in a SOT-323 (SC-70) surface mount package and dissipates a maximum of 500mW. This component is classified as Active product status and is RoHS3 compliant with MSL Level 1 (Unlimited moisture sensitivity).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the same functional parameters. Alternative packaging formats or inventory availability may necessitate the use of equivalent models within the same device family.

Substiute Parts

DMP2165UW-13

Diodes IncorporatedIn Stock: 1135DMP2165UW-13 Datasheet

Current PartRFQ

DMP2165UW-7

Diodes IncorporatedIn Stock: 155298DMP2165UW-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMP2165UW-13 are identified based on electrical parameter equivalence and mechanical compatibility. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match):

• FET Type: P-Channel
• Drain to Source Voltage (Vdss): 20V
• Continuous Drain Current (Id) @ 25°C: 2.5A (Ta)
• On-State Resistance (Rds On Max): 90mOhm @ 1.5A, 4.5V
• Gate Threshold Voltage (Vgs(th) Max): 1V @ 250µA
• Gate Charge (Qg Max): 3.5nC @ 4.5V
• Maximum Gate Voltage (Vgs Max): ±12V
• Input Capacitance (Ciss Max): 335pF @ 15V
• Power Dissipation (Max): 500mW (Ta)
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match):

• Package Type: SOT-323 (SC-70)
• Mounting Type: Surface Mount
• Base Product Number: DMP2165

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

The primary difference between the main part and its substitute is the packaging format (Tape & Reel versus Cut Tape & Digi-Reel®), which does not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The DMP2165UW-13 and DMP2165UW-7 are functionally equivalent P-Channel MOSFETs from Diodes Incorporated. Both devices maintain identical electrical specifications, thermal characteristics, and compliance certifications. The distinction between these parts is limited to packaging format:

DMP2165UW-13 (Tape & Reel): Suitable for high-volume automated assembly operations where continuous reel feeding is required.

DMP2165UW-7 (Cut Tape & Digi-Reel®): Suitable for lower-volume production, prototyping, or applications requiring flexible packaging options.

Both parts are Active product status, RoHS3 compliant, and carry MSL Level 1 (Unlimited) moisture sensitivity classification. Selection between these variants should be based on procurement requirements, assembly equipment compatibility, and inventory availability rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can DMP2165UW-7 be used as a direct replacement for DMP2165UW-13 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®). Circuit performance, thermal behavior, and electrical characteristics are equivalent.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly. Cut Tape packaging provides components in individual tape segments, typically used for lower-volume applications or manual assembly. Both formats contain the same component in the same SOT-323 package.

Q: Are there any compliance or regulatory differences between DMP2165UW-13 and DMP2165UW-7?

A: No. Both parts carry identical compliance certifications: RoHS3 Compliant, REACH Unaffected, MSL Level 1 (Unlimited), and ECCN EAR99 classification.

Q: What are the critical electrical parameters that define substitution for this P-Channel MOSFET?

A: Substitution is determined by matching: Vdss (20V), Id (2.5A @ 25°C), Rds On (90mOhm @ 1.5A, 4.5V), Vgs(th) (1V @ 250µA), Qg (3.5nC @ 4.5V), Vgs Max (±12V), Ciss (335pF @ 15V), power dissipation (500mW), and operating temperature range (-55°C to 150°C).

Q: Can these parts be used in applications requiring high-frequency switching?

A: Gate charge (Qg) of 3.5nC and input capacitance (Ciss) of 335pF are the relevant parameters for switching frequency performance. Both DMP2165UW-13 and DMP2165UW-7 are identical in these specifications and suitable for equivalent high-frequency applications.

Q: What is the moisture sensitivity level, and does it affect storage or handling?

A: Both parts carry MSL Level 1 (Unlimited), indicating unlimited shelf life without moisture bake-out requirements. Standard ESD precautions and dry storage conditions are recommended for all surface mount components.

Q: Are there inventory or lead-time considerations when selecting between these parts?

A: DMP2165UW-7 (Cut Tape & Digi-Reel®) shows higher inventory availability (155,200 pcs) compared to DMP2165UW-13 (Tape & Reel, 1,108 pcs). Selection may be influenced by procurement timelines and supply chain requirements.