DMP2005UFG-13 Equivalent & Substitute Parts

Part Overview

The DMP2005UFG-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 20V drain-to-source voltage with 89A continuous drain current at 25°C. This device is housed in a PowerDI3333-8 surface mount package and is designed for high-current switching applications requiring low on-resistance performance. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct functional replacement without circuit redesign. Substitution necessity arises from inventory availability, supply chain considerations, or manufacturing lot requirements while maintaining identical performance characteristics.

Substiute Parts

DMP2005UFG-13

Diodes IncorporatedIn Stock: 26455DMP2005UFG-13 Datasheet

Current PartRFQ

DMP2005UFG-7

Diodes IncorporatedIn Stock: 3186DMP2005UFG-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMP2005UFG-13 is based on strict electrical and mechanical parameter equivalence. The substitute part DMP2005UFG-7 qualifies as a direct equivalent because it maintains identical specifications across all critical parameters that determine functional compatibility:

Electrical Parameters (Must Match):

• Drain to Source Voltage (Vdss): 20V
• Continuous Drain Current (Id) @ 25°C: 89A
• On-Resistance (Rds On) @ 15A, 4.5V: 4mOhm
• Gate Threshold Voltage (Vgs(th)): 900mV @ 250µA
• Gate Charge (Qg): 125nC @ 10V
• Input Capacitance (Ciss): 4670pF @ 10V
• Maximum Gate Voltage (Vgs): ±10V
• Power Dissipation: 2.2W (Ta)
• Operating Temperature Range: -55°C to 150°C

Mechanical Parameters (Must Match):

• Package Type: 8-PowerVDFN (PowerDI3333-8)
• Mounting Type: Surface Mount
• Packaging Format: Tape & Reel (TR)

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Both parts share the same base product number (DMP2005) and are manufactured by Diodes Incorporated with Active product status, confirming long-term availability and support.

Parameter Comparison

Engineering Selection Recommendations

Both DMP2005UFG-13 and DMP2005UFG-7 are qualified for direct substitution based on complete electrical and mechanical parameter equivalence. Selection between these parts should be based on the following engineering criteria:

Inventory and Supply Considerations: The DMP2005UFG-13 maintains higher inventory availability (26,400 pcs) compared to DMP2005UFG-7 (3,168 pcs). For high-volume production requirements, the DMP2005UFG-13 is the primary selection. The DMP2005UFG-7 serves as a secondary source when primary inventory is depleted.

Compliance and Regulatory Status: Both parts maintain identical compliance certifications: ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity rating. Both are classified under ECCN EAR99 and HTSUS 8541.29.0095. Either part satisfies regulatory requirements for applications requiring environmental and trade compliance.

Product Lifecycle Status: Both parts maintain Active product status from Diodes Incorporated, confirming ongoing manufacturing support and long-term availability. No obsolescence risk differentiates these parts.

Application Compatibility: The identical electrical specifications (20V Vdss, 89A Id, 4mOhm Rds On, 2.2W power dissipation) and thermal operating range (-55°C to 150°C) ensure both parts function identically in circuit applications. The 8-PowerVDFN package and surface mount configuration are identical, requiring no PCB layout modifications.

Frequently Asked Questions (FAQ)

Q: Can DMP2005UFG-7 be used as a direct replacement for DMP2005UFG-13 in existing designs?

A: Yes. The DMP2005UFG-7 is a parametric equivalent with identical electrical ratings, on-resistance characteristics, thermal performance, and package configuration. No circuit modifications or PCB redesign are required. Both parts are manufactured by Diodes Incorporated and share the same base product number (DMP2005).

Q: What is the difference between DMP2005UFG-13 and DMP2005UFG-7?

A: The suffix designations (-13 and -7) indicate different manufacturing date codes or tape reel configurations within the same product line. All electrical and mechanical specifications are identical. The parts are functionally interchangeable.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts specify identical maximum power dissipation (2.2W at Ta), operating temperature range (-55°C to 150°C), and thermal characteristics. Performance in thermal management applications is equivalent.

Q: Do both parts require the same PCB footprint and solder reflow profile?

A: Yes. Both parts use the 8-PowerVDFN package (PowerDI3333-8) with identical pin configuration and mechanical dimensions. PCB footprints are identical, and standard surface mount reflow profiles apply to both parts without modification.

Q: Are there supply chain or lead time considerations when selecting between these parts?

A: The DMP2005UFG-13 maintains significantly higher inventory (26,400 pcs versus 3,168 pcs for DMP2005UFG-7). For applications with extended production runs or just-in-time supply requirements, DMP2005UFG-13 offers superior availability. DMP2005UFG-7 is suitable for lower-volume applications or as a secondary source option.

Q: Do both parts meet the same compliance and regulatory standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. Both are classified under ECCN EAR99 and HTSUS 8541.29.0095. Regulatory and environmental compliance is identical.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since all electrical, mechanical, and compliance parameters are identical, both parts can be used interchangeably within the same production batch without affecting circuit performance or reliability.