DMP1011LFV-13 Equivalent & Substitute Parts

Part Overview

The DMP1011LFV-13 is a P-Channel MOSFET manufactured by Diodes Incorporated, rated for 12V drain-to-source voltage with 19A continuous drain current at 25°C. This surface mount device is housed in an 8-PowerVDFN package and is designed for applications requiring low on-resistance switching and power dissipation control up to 2.16W. The part is Active in product status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same device family, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

DMP1011LFV-13

Diodes IncorporatedIn Stock: 965DMP1011LFV-13 Datasheet

Current PartRFQ

DMP1011LFV-7

Diodes IncorporatedIn Stock: 8293DMP1011LFV-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMP1011LFV-13 is based on strict equivalence of electrical and mechanical parameters within the DMP1011 device family. The substitute part DMP1011LFV-7 maintains identical specifications across all critical parameters that determine functional compatibility:

Key Parameters for Substitution:

• FET Type: P-Channel
• Drain to Source Voltage (Vdss): 12V
• Continuous Drain Current (Id): 19A @ 25°C
• On-Resistance (Rds On): 11.7 mOhm @ 12A, 4.5V
• Power Dissipation: 2.16W
• Package: 8-PowerVDFN (Surface Mount)
• Operating Temperature Range: -55°C to 150°C
• RoHS Compliance: ROHS3 Compliant

Both parts are manufactured by Diodes Incorporated and share the same base product number (DMP1011). The suffix variation (-13 versus -7) reflects different manufacturing date codes or tape reel configurations, not functional or electrical differences. Both parts are Active in product status and carry identical compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both DMP1011LFV-13 and DMP1011LFV-7 are functionally equivalent P-Channel MOSFETs with identical electrical specifications and mechanical packaging. Selection between these parts is based on availability and supply chain considerations rather than technical performance differences.

DMP1011LFV-13 is suitable for applications where this specific part number is specified in design documentation or where current inventory (886 Pcs) meets project requirements.

DMP1011LFV-7 provides an alternative with higher available inventory (8200 Pcs) and serves as a direct substitute when DMP1011LFV-13 stock is limited or when procurement lead times require sourcing from alternative batches within the same product family.

Both parts maintain Active product status with Diodes Incorporated, ensuring long-term availability and continued manufacturing support. Both are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for industrial and consumer applications. Moisture sensitivity level MSL 1 (Unlimited) indicates no special storage or handling requirements beyond standard component care.

Frequently Asked Questions (FAQ)

Q: Are DMP1011LFV-13 and DMP1011LFV-7 electrically identical?

A: Yes. Both parts share identical electrical specifications including Vdss (12V), continuous drain current (19A), on-resistance (11.7 mOhm), gate charge (9.5 nC), and power dissipation (2.16W). All threshold voltages, capacitances, and temperature ratings are equivalent.

Q: Can DMP1011LFV-7 be used as a direct replacement for DMP1011LFV-13 in existing circuit designs?

A: Yes. The parts are pin-compatible, package-compatible (both 8-PowerVDFN), and electrically equivalent. No circuit modifications are required for substitution.

Q: What does the suffix difference (-13 versus -7) indicate?

A: The suffix variation reflects different manufacturing date codes, tape reel configurations, or distribution batches. It does not indicate functional or electrical differences between the parts.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both DMP1011LFV-13 and DMP1011LFV-7 operate across the identical temperature range of -55°C to 150°C (TJ).

Q: Do both parts require the same PCB footprint and layout considerations?

A: Yes. Both parts use the 8-PowerVDFN package with identical pin assignments, pad layouts, and thermal characteristics. PCB designs are fully interchangeable.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity ratings (MSL 1 - Unlimited). Regulatory status is equivalent.

Q: Which part should be selected for new designs?

A: Either part is acceptable for new designs. Selection should be based on current availability, supplier lead times, and inventory levels. Both are Active products with ongoing manufacturing support from Diodes Incorporated.

Q: Is there a performance difference in switching speed or gate drive requirements?

A: No. Gate charge (9.5 nC @ 6V) and input capacitance (913 pF @ 6V) are identical, resulting in equivalent switching characteristics and gate drive requirements.