DMNH6010SCTB-13 Equivalent & Substitute Parts

Part Overview

The DMNH6010SCTB-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 133A continuous drain current at 25°C. This device is packaged in a Surface Mount TO-263AB (D2PAK) configuration and is designed for high-current switching applications requiring efficient thermal management. The part maintains Active product status and is RoHS3 compliant. Substitute parts are identified when electrical characteristics, mechanical packaging, and compliance certifications align with the original specification, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

DMNH6010SCTB-13

Diodes IncorporatedIn Stock: 928DMNH6010SCTB-13 Datasheet

Current PartRFQ

DMNH6010SCTBQ-13

Diodes IncorporatedIn Stock: 886DMNH6010SCTBQ-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMNH6010SCTB-13 is determined by strict equivalence across the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 60V
• Continuous Drain Current (Id) @ 25°C: 133A (Tc)
• On-State Resistance (Rds On) @ 25A, 10V: 10mOhm
• Gate Threshold Voltage (Vgs(th)) @ 1mA: 4V
• Gate Charge (Qg) @ 10V: 46nC
• Input Capacitance (Ciss) @ 25V: 2692pF
• Power Dissipation (Max): 5W (Ta), 375W (Tc)
• Operating Temperature Range: -55°C to 175°C (TJ)

Mechanical Equivalence Criteria:

• Package Type: TO-263AB (D2PAK), Surface Mount
• Mounting Configuration: Tape & Reel (TR)

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected
• Product Status: Active

The substitute part DMNH6010SCTBQ-13 meets all electrical and mechanical parameters. The primary distinction is the addition of Automotive grade qualification (AEC-Q101) in the substitute part, which represents an enhanced qualification level and does not restrict its use in non-automotive applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: DMNH6010SCTB-13

The DMNH6010SCTB-13 is suitable for general-purpose high-current switching applications requiring 60V operation and 133A continuous drain current. Active product status ensures ongoing manufacturer support and availability. RoHS3 compliance and REACH unaffected status satisfy environmental and regulatory requirements for commercial and industrial applications.

Substitute Part: DMNH6010SCTBQ-13

The DMNH6010SCTBQ-13 provides identical electrical and mechanical performance with the addition of Automotive grade qualification (AEC-Q101). This enhanced qualification level indicates compliance with automotive industry reliability and quality standards. The substitute part is suitable for applications requiring automotive-grade components or where enhanced qualification documentation is mandated. Both parts share the same base product number (DMNH6010) and are manufactured by Diodes Incorporated, ensuring design continuity.

Selection between these parts depends on application requirements and qualification mandates rather than electrical performance differences. Both parts are Active and maintain full RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can DMNH6010SCTBQ-13 be used as a direct replacement for DMNH6010SCTB-13?

A: Yes. The DMNH6010SCTBQ-13 is a direct substitute with identical electrical characteristics, on-state resistance, gate charge, and thermal performance. The only difference is the addition of Automotive grade qualification (AEC-Q101) in the substitute part, which does not restrict its use in non-automotive applications.

Q: What is the significance of the AEC-Q101 qualification on the substitute part?

A: AEC-Q101 is an automotive industry qualification standard that certifies the device meets enhanced reliability, quality, and testing requirements. This qualification does not change the electrical performance but indicates compliance with automotive-grade standards. Parts with this qualification are suitable for both automotive and non-automotive applications.

Q: Are the package dimensions identical between DMNH6010SCTB-13 and DMNH6010SCTBQ-13?

A: Yes. Both parts use the TO-263AB (D2PAK) Surface Mount package with identical mechanical specifications. PCB layout and thermal management considerations remain unchanged between the two parts.

Q: What is the difference between the "Ta" and "Tc" power dissipation ratings?

A: Power dissipation is specified at two conditions: 5W (Ta) represents the maximum power dissipation at ambient temperature, while 375W (Tc) represents the maximum power dissipation at case temperature. The case temperature rating reflects the device's capability when mounted on a PCB with appropriate thermal management.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both DMNH6010SCTB-13 and DMNH6010SCTBQ-13 are supplied in Tape & Reel (TR) packaging for automated assembly processes. Current inventory shows 874 pieces for the primary part and 862 pieces for the substitute part.

Q: What is the gate threshold voltage, and why is it important?

A: The gate threshold voltage (Vgs(th)) is 4V at 1mA drain current. This parameter defines the minimum gate-to-source voltage required to turn the MOSFET on. Identical threshold voltage between both parts ensures consistent switching behavior in gate drive circuits.

Q: Can these parts operate at the full 175°C junction temperature continuously?

A: The operating temperature range is -55°C to 175°C (TJ), indicating the device is rated for operation within this range. Continuous operation at maximum junction temperature depends on thermal management design, power dissipation, and cooling provisions in the application circuit.