DMN65D8LV-13 Equivalent & Substitute Parts

Part Overview

The DMN65D8LV-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-23-3 package. This device operates at a drain-to-source voltage rating of 60 V with a continuous drain current of 310 mA at 25°C and maximum power dissipation of 370 mW. The part is classified as Active product status and is RoHS3 compliant.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same device family. Alternative part numbers within the DMN65 series provide identical functional performance while differing in packaging format (Tape & Reel versus Cut Tape) or internal device variants. Identifying equivalent substitutes ensures design flexibility and supply chain continuity without requiring circuit redesign.

Substiute Parts

DMN65D8LV-13

Diodes IncorporatedIn Stock: 1174DMN65D8LV-13 Datasheet

Current PartRFQ

DMN65D8L-7

Diodes IncorporatedIn Stock: 586029DMN65D8L-7 Datasheet

Parametric EquivalentRFQ

DMN65D8LQ-13

Diodes IncorporatedIn Stock: 1276DMN65D8LQ-13 Datasheet

Parametric EquivalentRFQ

DMN65D8LQ-7

Diodes IncorporatedIn Stock: 8084DMN65D8LQ-7 Datasheet

Parametric EquivalentRFQ

DMN65D8LV-7

Diodes IncorporatedIn Stock: 948DMN65D8LV-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMN65D8LV-13 are identified within the Diodes Incorporated DMN65 family based on electrical parameter equivalence. All substitute parts maintain identical specifications across the following critical parameters:

• Drain-to-Source Voltage (Vdss): 60 V
• Continuous Drain Current (Id) @ 25°C: 310 mA
• On-State Resistance (Rds On): 3 Ω @ 115 mA, 10 V
• Gate-Source Threshold Voltage (Vgs(th)): 2 V @ 250 µA
• Gate Charge (Qg): 0.87 nC @ 10 V
• Input Capacitance (Ciss): 22 pF @ 25 V
• Power Dissipation: 370 mW
• Operating Temperature Range: -55°C to 150°C
• Package: SOT-23-3 (TO-236-3, SC-59)
• Mounting Type: Surface Mount
• FET Type: N-Channel
• Technology: MOSFET (Metal Oxide)

Substitution differences are limited to packaging format (Tape & Reel versus Cut Tape) and internal device variant designations (LV, LQ, L suffixes). These variations do not affect electrical performance or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the DMN65D8LV-13. Selection between equivalent parts is determined by packaging and supply requirements rather than functional performance.

DMN65D8L-7 is available in Cut Tape (CT) and Digi-Reel® format, suitable for applications requiring smaller quantity packaging or reel-based dispensing systems. This variant provides the highest inventory availability at 586,000 pieces.

DMN65D8LQ-13 and DMN65D8LQ-7 represent alternative internal device variants within the DMN65 family, supplied in Tape & Reel format. Both maintain identical electrical specifications and are suitable for high-volume automated assembly processes.

DMN65D8LV-7 is supplied in Tape & Reel format and represents an alternative packaging variant of the LV device series.

All substitute parts are Active product status, RoHS3 compliant, and REACH unaffected, ensuring regulatory compliance across applications. Selection should be based on packaging format compatibility with assembly equipment and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can DMN65D8L-7 be used as a direct replacement for DMN65D8LV-13?

A: Yes. Both parts maintain identical electrical parameters including Vdss (60 V), Id (310 mA), Rds On (3 Ω), and all other critical specifications. The primary difference is packaging format: DMN65D8LV-13 is supplied in Tape & Reel, while DMN65D8L-7 is available in Cut Tape and Digi-Reel® formats. PCB footprint and soldering requirements are identical.

Q: What is the difference between DMN65D8LV, DMN65D8LQ, and DMN65D8L variants?

A: These designations represent internal device variants within the DMN65 family. All variants maintain identical electrical specifications and package geometry (SOT-23-3). Differences are limited to internal manufacturing processes and quality grades. Substitution between variants does not affect circuit performance.

Q: Are there packaging compatibility issues when substituting between Tape & Reel and Cut Tape formats?

A: No compatibility issues exist at the component level. Both packaging formats contain identical devices in the same SOT-23-3 package. Compatibility depends on assembly equipment capability. Tape & Reel format is standard for automated pick-and-place systems, while Cut Tape is suitable for manual assembly or lower-volume production.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All listed substitute parts are RoHS3 compliant and REACH unaffected, matching the compliance profile of the DMN65D8LV-13. All parts are classified as Active product status.

Q: Can I mix different DMN65 variants in the same production run?

A: Yes. All variants are electrically and mechanically equivalent. Mixing variants in the same assembly does not introduce functional or reliability concerns. Substitution is transparent to circuit operation.

Q: What inventory considerations apply when selecting a substitute?

A: DMN65D8L-7 offers the highest inventory availability at 586,000 pieces. DMN65D8LQ-13 and DMN65D8LQ-7 provide intermediate availability at 1,254 and 7,985 pieces respectively. DMN65D8LV-7 and the original DMN65D8LV-13 offer lower availability at 914 and 1,110 pieces respectively. Selection should account for supply chain lead times and production volume requirements.