DMN63D1LV-13 Equivalent & Substitute Parts

Part Overview

The DMN63D1LV-13 is a dual N-channel MOSFET array manufactured by Diodes Incorporated, designed for surface mount applications in SOT-563 packaging. This device integrates two N-channel metal oxide semiconductor field effect transistors with a maximum drain-to-source voltage rating of 60V and continuous drain current capability of 550mA at 25°C. The part is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified to provide design flexibility when the primary part is unavailable or when alternative sourcing is required for supply chain optimization.

Substiute Parts

DMN63D1LV-13

Diodes IncorporatedIn Stock: 987DMN63D1LV-13 Datasheet

Current PartRFQ

CMLDM7002AJ TR PBFREE

Central Semiconductor CorpIn Stock: 6702CMLDM7002AJ TR PBFREE Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMN63D1LV-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

• Drain to Source Voltage (Vdss): Must equal or exceed 60V
• Configuration: Must maintain 2 N-Channel (Dual) topology
• Package / Case: Must be SOT-563 or SOT-666 compatible
• Rds On (Max): Must not exceed 2 Ohm @ 500mA, 10V
• Vgs(th) (Max): Must not exceed 2.5V @ specified Id
• Operating Temperature Range: Must encompass -55°C to 150°C minimum

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount required
• Supplier Device Package: SOT-563 specified

Compliance Requirements:

• RoHS3 Compliant status required
• MSL 1 (Unlimited) classification required

The CMLDM7002AJ TR PBFREE from Central Semiconductor Corp meets these substitution criteria. While the continuous drain current (Id) is reduced to 280mA and maximum power dissipation is 350mW compared to the primary part's 550mA and 940mW respectively, the device maintains electrical equivalence in voltage ratings, on-resistance characteristics, threshold voltage, and package specifications. Both parts share identical Vdss (60V), Rds On (2 Ohm @ 500mA, 10V), Vgs(th) (2.5V), SOT-563 packaging, and RoHS3 compliance status.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (DMN63D1LV-13): The DMN63D1LV-13 is recommended for applications requiring the full 550mA continuous drain current rating and 940mW maximum power dissipation. This part maintains Active product status with established supply availability and is RoHS3 compliant with unlimited moisture sensitivity classification.

Substitute Part Selection (CMLDM7002AJ TR PBFREE): The CMLDM7002AJ TR PBFREE is suitable for applications where continuous drain current requirements do not exceed 280mA and power dissipation remains below 350mW. This substitute maintains electrical equivalence in voltage ratings (60V Vdss), on-resistance characteristics (2 Ohm @ 500mA, 10V), and threshold voltage (2.5V). Both parts are RoHS3 compliant with MSL 1 classification and share identical SOT-563 surface mount packaging.

Compliance and Regulatory Status: Both the primary part and substitute are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8541.21.0095. Both maintain Active product status and unlimited moisture sensitivity level, ensuring equivalent handling and storage requirements.

Application-Specific Considerations: Selection between the primary and substitute part must account for the reduced continuous drain current (280mA versus 550mA) and maximum power dissipation (350mW versus 940mW) of the substitute. Applications operating at or near the primary part's rated current or power levels require the DMN63D1LV-13. The substitute's extended lower operating temperature limit (-65°C versus -55°C) may provide advantage in extreme cold environment applications.

Frequently Asked Questions (FAQ)

Q: Can the CMLDM7002AJ TR PBFREE directly replace the DMN63D1LV-13 in all applications?

A: Direct replacement is limited by the substitute's reduced continuous drain current rating (280mA versus 550mA) and maximum power dissipation (350mW versus 940mW). Applications operating within these reduced specifications can use the substitute. Applications requiring the full 550mA current capability or 940mW power dissipation require the primary part.

Q: Are the voltage ratings identical between the two parts?

A: Yes. Both the DMN63D1LV-13 and CMLDM7002AJ TR PBFREE are rated for 60V drain-to-source voltage (Vdss) and share identical on-resistance characteristics (2 Ohm @ 500mA, 10V) and threshold voltage (2.5V).

Q: Do both parts use the same package?

A: Yes. Both parts are available in SOT-563 and SOT-666 surface mount packages. The supplier device package for both is SOT-563, ensuring mechanical and electrical compatibility on printed circuit boards designed for either part.

Q: What are the differences in gate charge and input capacitance?

A: The CMLDM7002AJ TR PBFREE exhibits higher gate charge (0.59nC versus 0.392nC @ 4.5V) and higher input capacitance (50pF versus 30pF @ 25V). These differences may affect switching speed and gate drive requirements in high-frequency applications.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the DMN63D1LV-13 and CMLDM7002AJ TR PBFREE are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level classification.

Q: What is the temperature operating range difference?

A: The DMN63D1LV-13 operates from -55°C to 150°C (TJ), while the CMLDM7002AJ TR PBFREE extends the lower limit to -65°C. Both maintain the same upper temperature limit of 150°C.

Q: How do I determine which part is suitable for my application?

A: Evaluate your application's continuous drain current requirement and maximum power dissipation. If both parameters remain within the CMLDM7002AJ TR PBFREE specifications (280mA and 350mW respectively), the substitute is electrically compatible. If your application requires higher current or power ratings, the DMN63D1LV-13 is required.