DMN63D1L-7 Equivalent & Substitute Parts

Part Overview

The DMN63D1L-7 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 380mA continuous drain current at 25°C. The device is packaged in SOT-23-3 surface mount configuration and is designed for general-purpose switching applications requiring low on-resistance performance.

The DMN63D1L-7 carries an Obsolete product status. Identification of equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production, repair, and redesign activities.

Substiute Parts

DMN63D1L-7

Diodes IncorporatedIn Stock: 17464DMN63D1L-7 Datasheet

Current PartRFQ

2N7002K-7

Diodes IncorporatedIn Stock: 10001512N7002K-7 Datasheet

DirectRFQ

DMN63D1L-13

Diodes IncorporatedIn Stock: 145258DMN63D1L-13 Datasheet

Parametric EquivalentRFQ

PJA138K_R1_00001

Panjit International Inc.In Stock: 299624PJA138K_R1_00001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMN63D1L-7 is determined by the following critical parameters:

Electrical Compatibility Criteria:

• FET Type: N-Channel topology
• Drain to Source Voltage (Vdss): Minimum 60V rating
• Continuous Drain Current (Id): Minimum 380mA at 25°C
• On-Resistance (Rds On): Maximum 2 Ohm @ 500mA, 10V
• Gate Threshold Voltage (Vgs(th)): Maximum 2.5V @ 1mA
• Power Dissipation: Minimum 370mW
• Gate-Source Voltage (Vgs): ±20V maximum rating

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount
• Package: SOT-23-3 (TO-236-3, SC-59)

Regulatory Compliance:

• RoHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts must meet or exceed all electrical parameters while maintaining identical or compatible package specifications. Parts are classified as Direct Manufacturer Equivalent, Parametric Equivalent, or Manufacturer Recommended based on parameter alignment and product status.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalent: 2N7002K-7

The 2N7002K-7 is a direct electrical and mechanical equivalent to the DMN63D1L-7. Both devices are manufactured by Diodes Incorporated and share identical electrical specifications across all critical parameters: 60V Vdss, 380mA Id, 2 Ohm Rds On, and 370mW power dissipation. The 2N7002K-7 carries Active product status with significantly higher inventory availability (1,000,100 pieces). Both parts are ROHS3 compliant and MSL 1 rated. The 2N7002K-7 is the primary recommended substitute for direct replacement applications.

Parametric Equivalent: DMN63D1L-13

The DMN63D1L-13 is a parametric equivalent manufactured by Diodes Incorporated under the same base product number (DMN63). Electrical specifications are identical to the DMN63D1L-7 across all measured parameters. The primary difference is packaging format: DMN63D1L-13 is supplied in Tape & Reel (TR) configuration versus the original part's unspecified packaging. DMN63D1L-13 carries Active product status with substantial inventory (145,200 pieces). This part is suitable for applications requiring the same electrical performance with alternative supply chain logistics.

Manufacturer Recommended: PJA138K_R1_00001

The PJA138K_R1_00001 is a manufacturer-recommended substitute manufactured by Panjit International Inc. This part exhibits enhanced electrical performance in several parameters: 500mA continuous drain current (versus 380mA), 1.6 Ohm Rds On (versus 2 Ohm), and 500mW power dissipation (versus 370mW). However, the Vdss rating is reduced to 50V (versus 60V). The PJA138K_R1_00001 is suitable for applications where the 60V voltage rating is not required and where improved current handling and reduced on-resistance provide design benefits. This part carries Active product status with high inventory availability (299,588 pieces) and is ROHS3 compliant.

Frequently Asked Questions (FAQ)

Q: Can the 2N7002K-7 be used as a direct replacement for the DMN63D1L-7?

A: Yes. The 2N7002K-7 meets all electrical and mechanical specifications of the DMN63D1L-7. Both devices are N-Channel MOSFETs with 60V Vdss, 380mA continuous drain current, 2 Ohm on-resistance, and SOT-23-3 packaging. The 2N7002K-7 is manufactured by the same supplier (Diodes Incorporated) and carries Active product status.

Q: What is the key difference between DMN63D1L-13 and DMN63D1L-7?

A: The electrical specifications are identical. The primary difference is packaging format: DMN63D1L-13 is supplied in Tape & Reel (TR) configuration. Both parts share the same base product number (DMN63) and are manufactured by Diodes Incorporated. Selection between these parts depends on supply chain requirements and packaging preferences.

Q: Can the PJA138K_R1_00001 replace the DMN63D1L-7 in all applications?

A: The PJA138K_R1_00001 is suitable only for applications where the 60V drain-to-source voltage rating is not required. The PJA138K_R1_00001 is rated for 50V Vdss, which is 10V lower than the DMN63D1L-7. Applications requiring the full 60V rating must use 2N7002K-7 or DMN63D1L-13. The PJA138K_R1_00001 offers improved current handling (500mA versus 380mA) and lower on-resistance (1.6 Ohm versus 2 Ohm).

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The 2N7002K-7, DMN63D1L-13, and PJA138K_R1_00001 are all ROHS3 compliant. All parts carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which substitute part has the best inventory availability?

A: The 2N7002K-7 has the highest inventory availability with 1,000,100 pieces in stock, followed by PJA138K_R1_00001 with 299,588 pieces and DMN63D1L-13 with 145,200 pieces.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the identical temperature range of -55°C to 150°C (TJ), matching the DMN63D1L-7 specification.