DMN62D2UQ-13 Equivalent & Substitute Parts

Part Overview

The DMN62D2UQ-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-23-3 package. This device operates at 60 V drain-to-source voltage with a continuous drain current rating of 390 mA and maximum power dissipation of 500 mW. The part is qualified to AEC-Q101 automotive standards and carries active product status. Substitute parts are identified to address inventory availability, lead time requirements, or procurement constraints while maintaining full electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	390	mA
Rds On (Max) @ 50 mA, 5 V	2	Ω
Vgs(th) (Max) @ 250 µA	1	V
Gate Charge (Qg) (Max) @ 10 V	0.8	nC
Input Capacitance (Ciss) (Max) @ 30 V	41	pF
Power Dissipation (Max)	500	mW
Operating Temperature Range	-55 to 150	°C
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
Grade	Automotive	—
Qualification	AEC-Q101	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

The DMN62D2UQ-13 has one identified parametric equivalent: DMN62D2UQ-7. Both parts are classified as direct substitutes based on identical electrical and mechanical specifications. The substitution is valid because the following critical parameters are matched across both devices:

Drain-to-source voltage (Vdss): 60 V
Continuous drain current (Id): 390 mA
On-resistance (Rds On): 2 Ω @ 50 mA, 5 V
Gate threshold voltage (Vgs(th)): 1 V @ 250 µA
Gate charge (Qg): 0.8 nC @ 10 V
Input capacitance (Ciss): 41 pF @ 30 V
Power dissipation: 500 mW
Operating temperature range: -55°C to 150°C
Package: SOT-23-3
Automotive grade and AEC-Q101 qualification
RoHS3 compliance and MSL 1 rating

The only difference between these parts is the tape and reel quantity: DMN62D2UQ-13 is supplied in 10K reels, while DMN62D2UQ-7 is supplied in 3K reels. This distinction affects procurement and inventory management but does not impact electrical performance or functional compatibility.

Parameter Comparison

Parameter	DMN62D2UQ-13	DMN62D2UQ-7	Match
Manufacturer	Diodes Incorporated	Diodes Incorporated	Yes
FET Type	N-Channel	N-Channel	Yes
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	Yes
Vdss	60 V	60 V	Yes
Id @ 25°C	390 mA	390 mA	Yes
Rds On (Max) @ 50 mA, 5 V	2 Ω	2 Ω	Yes
Vgs(th) (Max) @ 250 µA	1 V	1 V	Yes
Qg (Max) @ 10 V	0.8 nC	0.8 nC	Yes
Ciss (Max) @ 30 V	41 pF	41 pF	Yes
Power Dissipation (Max)	500 mW	500 mW	Yes
Operating Temperature	-55°C to 150°C	-55°C to 150°C	Yes
Package	SOT-23-3	SOT-23-3	Yes
Mounting Type	Surface Mount	Surface Mount	Yes
Grade	Automotive	Automotive	Yes
Qualification	AEC-Q101	AEC-Q101	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Yes
MSL	1 (Unlimited)	1 (Unlimited)	Yes
Packaging Format	Tape & Reel (10K)	Tape & Reel (3K)	Different Quantity

Engineering Selection Recommendations

Both the DMN62D2UQ-13 and DMN62D2UQ-7 are active products from Diodes Incorporated with identical electrical specifications and automotive-grade qualification. Selection between these parts should be based on procurement requirements:

DMN62D2UQ-13 is appropriate for high-volume production runs or applications requiring 10K reel quantities to optimize supply chain efficiency and reduce per-unit handling costs.

DMN62D2UQ-7 is appropriate for lower-volume applications, prototyping, or situations where 3K reel quantities align with production schedules and inventory management practices.

Both parts meet AEC-Q101 automotive qualification standards and carry ROHS3 compliance certification. The MSL 1 rating indicates unlimited shelf life under controlled storage conditions. No electrical performance differences exist between these devices; substitution is a matter of procurement logistics and inventory planning.

Frequently Asked Questions (FAQ)

Q: Can DMN62D2UQ-7 be used as a direct replacement for DMN62D2UQ-13 in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the tape and reel quantity (3K versus 10K). Substitution is valid for any application where the DMN62D2UQ-13 is specified.

Q: Are there any performance differences between these two part numbers?

A: No. All electrical parameters, including Vdss, Id, Rds On, gate charge, and input capacitance, are identical. Both parts operate across the same temperature range (-55°C to 150°C) and have the same power dissipation rating.

Q: Do both parts use the same SOT-23-3 package?

A: Yes. Both the DMN62D2UQ-13 and DMN62D2UQ-7 are supplied in the SOT-23-3 package, also designated as TO-236-3 or SC-59. PCB footprints and assembly processes are identical.

Q: Are both parts automotive-qualified?

A: Yes. Both parts carry automotive grade classification and AEC-Q101 qualification. Both are ROHS3 compliant and have MSL 1 moisture sensitivity ratings.

Q: What is the difference between the part numbers?

A: The suffix "-13" and "-7" indicate different tape and reel quantities. DMN62D2UQ-13 is supplied in 10K reel quantities, while DMN62D2UQ-7 is supplied in 3K reel quantities. This is a packaging and supply chain distinction, not a functional difference.

Q: Can I mix these parts in the same production batch?

A: Yes. Since the parts are electrically and mechanically identical, they can be used interchangeably in the same design and production environment. Reel quantity differences do not affect component performance or compatibility.

Q: What is the MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life. These parts do not require special moisture-controlled storage and can be stored under standard industrial conditions without time-based restrictions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message