DMN62D0LFD-13 Equivalent & Substitute Parts

Part Overview

The DMN62D0LFD-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60 V drain-to-source voltage with 310 mA continuous drain current and 480 mW power dissipation. The device is packaged in a 3-UDFN surface mount configuration and operates across the temperature range of -55°C to 150°C. This part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design requirements and procurement continuity.

Substiute Parts

DMN62D0LFD-13

Diodes IncorporatedIn Stock: 1113DMN62D0LFD-13 Datasheet

Current PartRFQ

DMN62D1LFD-7

Diodes IncorporatedIn Stock: 23375DMN62D1LFD-7 Datasheet

DirectRFQ

DMN62D0LFD-7

Diodes IncorporatedIn Stock: 203491DMN62D0LFD-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMN62D0LFD-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

• Drain-to-Source Voltage (Vdss): Must equal or exceed 60 V
• Continuous Drain Current (Id): Must equal or exceed 310 mA at 25°C
• Power Dissipation: Must equal or exceed 480 mW
• On-State Resistance (Rds On): Must equal or be lower than 2 Ω at specified conditions
• Gate-Source Voltage (Vgs): Must support ±20 V operation
• Operating Temperature Range: Must encompass -55°C to 150°C

Mechanical Compatibility Criteria:

• Package Type: 3-UDFN (X1-DFN1212-3)
• Mounting Type: Surface Mount
• Pin Configuration: Identical to original device

Compliance Criteria:

• RoHS3 Compliance required
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are classified into two categories: Direct Manufacturer Substitutes (active product status with enhanced or equivalent electrical performance) and Parametric Equivalents (active product status with identical electrical specifications).

Parameter Comparison

Engineering Selection Recommendations

DMN62D0LFD-7 (Parametric Equivalent)

The DMN62D0LFD-7 is the primary recommended substitute for the obsolete DMN62D0LFD-13. This part maintains identical electrical specifications across all critical parameters: 60 V Vdss, 310 mA continuous drain current, 480 mW power dissipation, and 2 Ω Rds On. The device is manufactured by Diodes Incorporated and carries active product status, ensuring long-term availability and supply chain continuity. The part is packaged identically in 3-UDFN surface mount configuration and meets all compliance requirements including ROHS3 compliance and MSL 1 rating. Inventory availability is substantial at 203,400 pieces, supporting both immediate and sustained procurement needs.

DMN62D1LFD-7 (Direct Manufacturer Substitute)

The DMN62D1LFD-7 serves as an enhanced alternative when increased current capacity is required. This part exceeds the original specifications with 400 mA continuous drain current (versus 310 mA) and 500 mW power dissipation (versus 480 mW), while maintaining the same 60 V Vdss rating and 2 Ω Rds On. The device is pin-compatible, surface mount compatible, and shares identical package geometry. Active product status and ROHS3 compliance are confirmed. Gate charge increases marginally to 0.55 nC and input capacitance to 36 pF, representing minor parameter shifts within acceptable engineering tolerances. This substitute is suitable for applications requiring enhanced thermal or current margin.

Both substitute parts are manufactured by Diodes Incorporated, eliminating cross-manufacturer compatibility concerns and ensuring consistent device behavior and reliability characteristics.

Frequently Asked Questions (FAQ)

Q: Can the DMN62D0LFD-7 be used as a direct replacement for the DMN62D0LFD-13?

A: Yes. The DMN62D0LFD-7 is electrically and mechanically identical to the DMN62D0LFD-13 across all specified parameters. Both devices feature 60 V Vdss, 310 mA continuous drain current, 480 mW power dissipation, and 2 Ω Rds On. The 3-UDFN package and surface mount configuration are identical. The primary difference is product status: the -13 variant is obsolete while the -7 variant is active.

Q: What is the difference between the DMN62D1LFD-7 and DMN62D0LFD-7?

A: The DMN62D1LFD-7 provides higher current capacity at 400 mA continuous drain current compared to 310 mA for the DMN62D0LFD-7. Power dissipation is also increased to 500 mW versus 480 mW. On-state resistance remains identical at 2 Ω. Gate charge and input capacitance are marginally higher in the -1 variant. Both parts share the same 60 V Vdss rating and 3-UDFN package.

Q: Are the substitute parts pin-compatible with the original DMN62D0LFD-13?

A: Yes. Both substitute parts utilize the identical 3-UDFN package configuration with the same pin assignment and physical dimensions. No PCB layout modifications are required for substitution.

Q: What is the packaging difference between the main part and substitute parts?

A: The main part (DMN62D0LFD-13) is supplied in standard packaging. The substitute parts (DMN62D1LFD-7 and DMN62D0LFD-7) are supplied in Tape & Reel (TR) packaging. Both packaging formats contain identical devices; the difference is in the delivery and handling format for automated assembly processes.

Q: Do the substitute parts meet the same compliance requirements as the original?

A: Yes. Both substitute parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and are REACH unaffected. Compliance certifications are identical to the original part.

Q: Which substitute should be selected for new designs?

A: The DMN62D0LFD-7 is recommended for direct replacement applications requiring identical electrical performance. The DMN62D1LFD-7 is recommended when designs require enhanced current capacity or thermal margin beyond the original 310 mA specification.

Q: What is the inventory status of the substitute parts?

A: The DMN62D0LFD-7 has substantial inventory availability at 203,400 pieces. The DMN62D1LFD-7 has 23,300 pieces available. Both parts are in active production status, ensuring continued availability for future procurement.