DMN6013LFG-13 Equivalent & Substitute Parts

Part Overview

The DMN6013LFG-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 60V drain-to-source voltage with 10.3A continuous drain current at 25°C (Ta) and 45A at case temperature (Tc). This device is packaged in a PowerDI3333-8 surface mount configuration and is designed for power switching applications requiring compact form factors with integrated thermal management. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set, enabling direct replacement in circuit designs without functional degradation.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	60	V
Continuous Drain Current @ 25°C (Ta)	10.3	A
Continuous Drain Current @ Case (Tc)	45	A
On-State Resistance (Rds On) @ 10A, 10V	13	mOhm
Gate Threshold Voltage (Vgs(th)) @ 250µA	3	V
Gate Charge (Qg) @ 10V	55.4	nC
Input Capacitance (Ciss) @ 30V	2577	pF
Power Dissipation (Max) @ Ta	1	W
Operating Temperature Range	-55 to 150	°C (TJ)
Package Type	8-PowerVDFN	Surface Mount
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility for the DMN6013LFG-13 is determined by equivalence across the following critical parameters:

Electrical Equivalence Criteria:

Drain-to-Source Voltage (Vdss): 60V minimum
On-State Resistance (Rds On): 13 mOhm maximum at specified gate voltage
Gate Threshold Voltage (Vgs(th)): 3V maximum at 250µA
Operating Temperature Range: -55°C to 150°C minimum
Continuous Drain Current: 10.3A (Ta) or higher

Mechanical Compatibility Criteria:

Package Type: 8-PowerVDFN or equivalent surface mount configuration
Mounting Type: Surface Mount
Supplier Device Package: PowerDI3333-8 or functionally equivalent

Compliance Criteria:

RoHS3 Compliance required
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Active product status

Substitute parts are grouped into two categories: Parametric Equivalents (identical electrical specifications from the same manufacturer) and Manufacturer Recommended Alternatives (functionally compatible parts with enhanced performance characteristics from alternative manufacturers).

Parameter Comparison

Parameter	DMN6013LFG-13	DMN6013LFG-7	DMN6013LFGQ-7	TPH7R006PL,L1Q
Manufacturer	Diodes Incorporated	Diodes Incorporated	Diodes Incorporated	Toshiba Semiconductor
Vdss (V)	60	60	60	60
Id @ 25°C Ta (A)	10.3	10.3	10.3	—
Id @ Case Tc (A)	45	45	45	60
Rds On (mOhm) @ 10A, Vgs	13 @ 10V	13 @ 10V	13 @ 10V	13.5 @ 4.5V
Vgs(th) (V) @ 250µA	3	3	3	2.5
Gate Charge Qg (nC) @ 10V	55.4	55.4	55.4	22
Ciss (pF) @ 30V	2577	2577	2577	1875
Power Dissipation Max (W)	1 (Ta)	1 (Ta)	1 (Ta)	81 (Tc)
Operating Temperature (°C)	-55 to 150	-55 to 150	-55 to 150	-55 to 175
Package	8-PowerVDFN	8-PowerVDFN	8-PowerVDFN	8-SOP Advance (5x5)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active
Automotive Grade	—	—	AEC-Q101	—

Engineering Selection Recommendations

DMN6013LFG-7 (Diodes Incorporated)

This part is a parametric equivalent to the DMN6013LFG-13, maintaining identical electrical specifications across all critical parameters including Vdss, Rds On, gate threshold voltage, and operating temperature range. Both devices share the same PowerDI3333-8 package configuration and 8-PowerVDFN form factor. The primary distinction is the tape reel configuration suffix (-7 versus -13), which reflects different manufacturing or distribution batches. Current inventory for DMN6013LFG-7 is 26,073 units, providing superior availability compared to the primary part. This substitute is suitable for direct replacement in all applications where DMN6013LFG-13 is specified, with no circuit modifications required.

DMN6013LFGQ-7 (Diodes Incorporated)

This part maintains identical electrical and mechanical specifications to the DMN6013LFG-13 while adding automotive-grade qualification under AEC-Q101 standard. The suffix "Q" designates automotive qualification, making this part suitable for applications requiring automotive-level reliability and traceability. All electrical parameters, package configuration, and compliance certifications remain equivalent. Current inventory is 2,717 units. Selection of this part is appropriate when automotive-grade components are mandated by design specifications or supply chain requirements, despite identical functional performance to the standard industrial grade.

TPH7R006PL,L1Q (Toshiba Semiconductor and Storage)

This part represents a manufacturer-recommended alternative with enhanced performance characteristics. While maintaining the 60V Vdss rating and compatible on-state resistance specification, the TPH7R006PL,L1Q offers significantly higher continuous drain current (60A at case temperature versus 45A), substantially lower gate charge (22 nC versus 55.4 nC), and reduced input capacitance (1875 pF versus 2577 pF). Power dissipation capability is substantially higher at 81W (Tc) compared to 1W (Ta). The operating temperature range extends to 175°C maximum junction temperature. Package configuration is 8-SOP Advance (5x5), which differs from the PowerDI3333-8 form factor and requires PCB layout verification for mechanical fit. This substitute is appropriate for applications requiring enhanced thermal performance, faster switching characteristics, or higher current capacity, provided that the alternative package footprint is accommodated in the circuit design. Current inventory is 54,776 units.

Frequently Asked Questions (FAQ)

Q: Can DMN6013LFG-7 be used as a direct replacement for DMN6013LFG-13 without circuit modifications?

A: Yes. DMN6013LFG-7 is a parametric equivalent with identical electrical specifications, package configuration, and compliance certifications. No circuit modifications are required for direct substitution.

Q: What is the difference between DMN6013LFG-13 and DMN6013LFG-7?

A: The suffix designates different tape reel configurations or manufacturing batches. Electrical performance and package specifications are identical. The primary practical difference is inventory availability and potential lead time variations.

Q: When should DMN6013LFGQ-7 be selected instead of DMN6013LFG-13?

A: DMN6013LFGQ-7 should be selected when automotive-grade qualification (AEC-Q101) is required by design specifications, supply chain policies, or end-application standards. Electrical and mechanical performance are equivalent to the standard industrial grade.

Q: Is TPH7R006PL,L1Q a direct replacement for DMN6013LFG-13?

A: TPH7R006PL,L1Q is functionally compatible but not a direct replacement due to package configuration differences (8-SOP Advance versus PowerDI3333-8). PCB layout and footprint verification is required before substitution. The part offers enhanced performance characteristics including higher current capacity and lower gate charge.

Q: What are the key electrical parameters that determine substitution eligibility?

A: Substitution eligibility is determined by equivalence in Drain-to-Source Voltage (Vdss), On-State Resistance (Rds On), Gate Threshold Voltage (Vgs(th)), and Operating Temperature Range. Continuous drain current must meet or exceed the primary part specification. All substitute parts must maintain ROHS3 compliance and MSL 1 rating.

Q: Does the TPH7R006PL,L1Q require different gate drive voltage compared to DMN6013LFG-13?

A: Gate drive voltage compatibility is maintained across all substitute parts. The TPH7R006PL,L1Q operates with the same ±20V maximum gate voltage specification. However, the lower gate threshold voltage (2.5V versus 3V) and reduced gate charge (22 nC versus 55.4 nC) may enable faster switching response in gate driver circuits.

Q: What is the impact of package configuration differences when substituting TPH7R006PL,L1Q?

A: The TPH7R006PL,L1Q uses an 8-SOP Advance (5x5) package versus the PowerDI3333-8 form factor of the primary part. Physical dimensions, lead spacing, and thermal pad configuration differ. PCB footprint, trace routing, and thermal management layout must be re-evaluated before implementation. Mechanical compatibility cannot be assumed without detailed package specification review.

Q: Are all substitute parts available in the same packaging format (Tape & Reel)?

A: Yes. All listed substitute parts are available in Tape & Reel (TR) packaging, maintaining supply chain compatibility with automated assembly processes.

Q: What compliance certifications are maintained across all substitute parts?

A: All substitute parts maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity rating, and active product status. DMN6013LFGQ-7 additionally carries AEC-Q101 automotive qualification. All parts are classified under ECCN EAR99 and HTSUS 8541.29.0095.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message