DMN3053L-13 Equivalent & Substitute Parts

Part Overview

The DMN3053L-13 is an N-Channel MOSFET rated for 30V drain-to-source voltage with 4A continuous drain current in a surface mount SOT-23-3 package. This device is manufactured by Diodes Incorporated and is currently in active production status. The part is supplied in Tape & Reel (TR) packaging format.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the same device category. The DMN3053L-13 has a direct parametric equivalent available in an alternative packaging format, which may be necessary for procurement flexibility, inventory availability, or supply chain optimization.

Substiute Parts

DMN3053L-13

Diodes IncorporatedIn Stock: 5674DMN3053L-13 Datasheet

Current PartRFQ

DMN3053L-7

Diodes IncorporatedIn Stock: 125192DMN3053L-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the DMN3053L-13 and DMN3053L-7 is based on identical electrical and mechanical specifications. Both parts share the same base product number (DMN3053) and are manufactured by Diodes Incorporated.

The substitution criteria are determined by the following parameters:

• Drain to Source Voltage (Vdss): 30V (identical)
• Continuous Drain Current (Id): 4A (identical)
• On-State Resistance (Rds On): 45mOhm @ 4A, 10V (identical)
• Gate Threshold Voltage: 1.4V @ 250µA (identical)
• Gate Charge: 17.2 nC @ 10V (identical)
• Maximum Gate Voltage: ±12V (identical)
• Input Capacitance: 676 pF @ 15V (identical)
• Power Dissipation: 760mW (identical)
• Operating Temperature Range: -55°C to 150°C (identical)
• Package: SOT-23-3 / TO-236-3 / SC-59 (identical)
• Mounting Type: Surface Mount (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)
• REACH Status: REACH Unaffected (identical)

The only difference between these parts is the packaging format: DMN3053L-13 is supplied in Tape & Reel (TR) format, while DMN3053L-7 is supplied in Cut Tape (CT) & Digi-Reel® format.

Parameter Comparison

Engineering Selection Recommendations

Both the DMN3053L-13 and DMN3053L-7 are active production devices from Diodes Incorporated with identical electrical specifications and mechanical compatibility. Selection between these parts is determined by packaging and supply requirements rather than functional performance.

The DMN3053L-13 in Tape & Reel (TR) format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The DMN3053L-7 in Cut Tape (CT) & Digi-Reel® format provides flexibility for lower-volume applications or mixed-component pick-and-place operations.

Both parts maintain full compliance with ROHS3 and REACH regulations. The Moisture Sensitivity Level of 1 (Unlimited) indicates no special moisture handling requirements for either variant.

Selection should be based on assembly equipment compatibility and procurement availability rather than electrical or thermal performance considerations, as all specified parameters are identical.

Frequently Asked Questions (FAQ)

Q: Are the DMN3053L-13 and DMN3053L-7 electrically interchangeable?

A: Yes. Both parts have identical electrical specifications including Vdss (30V), continuous drain current (4A), on-state resistance (45 mOhm @ 4A, 10V), gate threshold voltage (1.4V), and all other electrical parameters listed in the parameter comparison table.

Q: What is the difference between these two part numbers?

A: The only difference is the packaging format. The DMN3053L-13 is supplied in Tape & Reel (TR) format, while the DMN3053L-7 is supplied in Cut Tape (CT) & Digi-Reel® format. Both use the same SOT-23-3 package for the actual component.

Q: Can I use DMN3053L-7 in place of DMN3053L-13 on a PCB?

A: Yes. The physical package (SOT-23-3) and all electrical characteristics are identical. The difference in part numbers reflects only the supply format, not the component itself.

Q: Which packaging format should I select for my application?

A: Selection depends on your assembly process. Tape & Reel (TR) format is standard for high-volume automated assembly lines. Cut Tape (CT) & Digi-Reel® format is suitable for lower-volume production, prototyping, or when using pick-and-place equipment that does not support continuous reel feeding.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and have identical Moisture Sensitivity Level (MSL 1 - Unlimited). They carry the same ECCN (EAR99) and HTSUS classifications.

Q: What is the operating temperature range for both parts?

A: Both the DMN3053L-13 and DMN3053L-7 operate across the same temperature range of -55°C to 150°C (junction temperature).

Q: Can I mix these parts in the same production batch?

A: Yes, from an electrical and functional standpoint. However, assembly process compatibility should be verified with your manufacturing equipment specifications, as the packaging formats differ.