DMN3023L-13 Equivalent & Substitute Parts

Part Overview

The DMN3023L-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 6.2A continuous drain current at 25°C. The device is packaged in SOT-23-3 surface mount configuration and is designed for general-purpose switching and amplification applications. The part is currently Active in product status with 12,963 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, supply chain considerations, or design flexibility within specified parameter ranges.

Substiute Parts

DMN3023L-13

Diodes IncorporatedIn Stock: 13057DMN3023L-13 Datasheet

Current PartRFQ

PJA3404A_R1_00001

Panjit International Inc.In Stock: 24041PJA3404A_R1_00001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DMN3023L-13 with the PJA3404A_R1_00001 is based on the following electrical and mechanical compatibility criteria:

Matching Parameters:

• FET Type: Both are N-Channel MOSFETs
• Technology: Both utilize Metal Oxide MOSFET technology
• Drain to Source Voltage (Vdss): Both rated at 30V
• Package / Case: Both use SOT-23-3 (TO-236-3, SC-59) surface mount configuration
• Mounting Type: Both are surface mount devices
• Gate Voltage (Vgs Max): Both support ±20V
• RoHS Status: Both are ROHS3 Compliant
• Moisture Sensitivity Level (MSL): Both rated at Level 1 (Unlimited)
• REACH Status: Both are REACH Unaffected
• Product Status: Both are Active

Allowable Parameter Variations: The PJA3404A_R1_00001 operates within acceptable substitution ranges for continuous drain current, on-resistance, gate charge, and power dissipation specifications. These variations remain within typical application tolerances for N-Channel MOSFET switching circuits.

Parameter Comparison

Engineering Selection Recommendations

Both the DMN3023L-13 and PJA3404A_R1_00001 are Active products with full RoHS3 compliance and REACH Unaffected status, making them suitable for current design implementations. The devices share identical voltage ratings (30V Vdss) and package form factors (SOT-23-3 surface mount), enabling direct mechanical and electrical compatibility in PCB layouts.

The PJA3404A_R1_00001 offers higher power dissipation capability (1.25W versus 900mW) and lower gate charge (12.8 nC versus 18.4 nC), which may provide advantages in high-frequency switching applications. The continuous drain current specification of the PJA3404A_R1_00001 (5.6A) is lower than the DMN3023L-13 (6.2A), requiring evaluation against specific application current requirements.

Both devices maintain unlimited moisture sensitivity (MSL Level 1) and operate across overlapping temperature ranges, with the DMN3023L-13 supporting an extended upper temperature limit of 155°C compared to 150°C for the PJA3404A_R1_00001.

Frequently Asked Questions (FAQ)

Q: Can the PJA3404A_R1_00001 be used as a direct replacement for the DMN3023L-13 in existing designs?

A: The PJA3404A_R1_00001 is mechanically and electrically compatible with the DMN3023L-13 due to matching SOT-23-3 packaging and identical 30V Vdss rating. However, the lower continuous drain current specification (5.6A versus 6.2A) requires verification against application current demands. Both devices are N-Channel MOSFETs with compatible gate voltage characteristics.

Q: What are the key differences between these two parts?

A: The primary differences are continuous drain current (DMN3023L-13: 6.2A; PJA3404A_R1_00001: 5.6A), power dissipation (DMN3023L-13: 900mW; PJA3404A_R1_00001: 1.25W), gate charge (DMN3023L-13: 18.4 nC; PJA3404A_R1_00001: 12.8 nC), and maximum operating temperature (DMN3023L-13: 155°C; PJA3404A_R1_00001: 150°C). On-resistance values are comparable at 10V gate voltage.

Q: Are both parts suitable for high-frequency switching applications?

A: The PJA3404A_R1_00001 exhibits lower gate charge (12.8 nC) and input capacitance (602 pF) compared to the DMN3023L-13 (18.4 nC and 873 pF respectively), which may provide switching speed advantages. Both devices are rated for surface mount applications and support standard gate drive voltages.

Q: Do these parts have the same compliance certifications?

A: Both the DMN3023L-13 and PJA3404A_R1_00001 are ROHS3 Compliant, REACH Unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity ratings. Both are classified under ECCN EAR99 for export purposes.

Q: What is the impact of the 0.6A difference in continuous drain current?

A: The DMN3023L-13 supports 6.2A continuous drain current while the PJA3404A_R1_00001 supports 5.6A. Applications requiring sustained currents above 5.6A must use the DMN3023L-13. For applications operating below 5.6A, both devices are suitable.

Q: Can these parts be used interchangeably on the same PCB layout?

A: Yes. Both devices use identical SOT-23-3 (TO-236-3, SC-59) packaging with the same pin configuration and footprint, enabling direct PCB layout compatibility without modification.