DMN3009LFV-13 Equivalent & Substitute Parts

Part Overview

The DMN3009LFV-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 60A continuous drain current at 25°C. This device is housed in a surface mount PowerDI3333-8 package and is designed for high-current switching applications requiring low on-resistance performance. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

DMN3009LFV-13

Diodes IncorporatedIn Stock: 33447DMN3009LFV-13 Datasheet

Current PartRFQ

DMN3009LFV-7

Diodes IncorporatedIn Stock: 30368DMN3009LFV-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DMN3009LFV-13 is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Drain to Source Voltage (Vdss): 30V
• Continuous Drain Current (Id) @ 25°C: 60A
• Rds On (Max) @ 30A, 10V: 5.5 mOhm
• Gate Threshold Voltage (Vgs(th)): 3V @ 250µA
• Gate Charge (Qg) @ 10V: 42 nC
• Input Capacitance (Ciss) @ 15V: 2000 pF
• Power Dissipation (Max): 2W
• Operating Temperature Range: -55°C to 150°C

Mechanical Parameters (Must Match):

• Mounting Type: Surface Mount
• Package / Case: 8-PowerVDFN
• Supplier Device Package: PowerDI3333-8

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The DMN3009LFV-13 maintains full parametric equivalence with the DMN3009LFV-7 variant, both manufactured by Diodes Incorporated under the same base product number DMN3009.

Parameter Comparison

Engineering Selection Recommendations

Both the DMN3009LFV-13 and DMN3009LFV-7 are active production parts manufactured by Diodes Incorporated with identical electrical and mechanical specifications. Selection between these variants is based on supply chain availability and packaging configuration (Tape & Reel format for both).

Compliance Considerations:

• Both parts maintain ROHS3 compliance, suitable for applications requiring environmental regulatory adherence
• Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage and handling
• Both parts are REACH Unaffected and classified under ECCN EAR99

Inventory Status:

• DMN3009LFV-13: 33,400 pieces in stock
• DMN3009LFV-7: 30,300 pieces in stock

Direct substitution is supported without circuit redesign or performance degradation when electrical and mechanical parameters are maintained as specified.

Frequently Asked Questions (FAQ)

Q: Can the DMN3009LFV-7 be used as a direct replacement for the DMN3009LFV-13?

A: Yes. Both parts are manufactured by Diodes Incorporated and maintain identical electrical specifications across all critical parameters including Vdss (30V), Id (60A), Rds On (5.5 mOhm), and operating temperature range (-55°C to 150°C). Both use the same 8-PowerVDFN package and PowerDI3333-8 supplier device package. No circuit modifications are required.

Q: Are there any differences in package dimensions or PCB footprint between these parts?

A: No. Both the DMN3009LFV-13 and DMN3009LFV-7 use the 8-PowerVDFN package with identical mechanical specifications. PCB footprints are interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, are REACH Unaffected, and are classified under ECCN EAR99. Compliance profiles are identical.

Q: What is the significance of the different part number suffixes (-13 vs -7)?

A: The suffix designates different manufacturing date codes or tape reel configurations within the same product family. Electrical and mechanical specifications remain identical across all DMN3009LFV variants.

Q: Can these parts be used interchangeably in high-current switching applications?

A: Yes. Both parts are rated for 60A continuous drain current at 25°C with 5.5 mOhm maximum on-resistance at 30A and 10V gate-source voltage. Thermal and electrical performance characteristics are equivalent.

Q: What is the gate charge specification and why is it important?

A: Gate charge (Qg) is specified at 42 nC maximum at 10V for both parts. This parameter determines the switching speed and gate drive requirements. Identical specifications ensure equivalent switching performance in driver circuits.

Q: Are there any storage or handling differences between these substitute parts?

A: No. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling procedures are identical.