DMN3007LSSQ-13 Equivalent & Substitute Parts

Part Overview

The DMN3007LSSQ-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for 30V drain-to-source voltage with 16A continuous drain current at 25°C. The device is housed in an 8-SOIC surface mount package and is classified as Active product status. This component is suitable for applications requiring moderate current switching and power dissipation up to 2.5W.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained within the specified parameter ranges. Alternatives may be required due to supply chain considerations, design optimization, or application-specific requirements while maintaining functional equivalence.

Substiute Parts

DMN3007LSSQ-13

Diodes IncorporatedIn Stock: 3265DMN3007LSSQ-13 Datasheet

Current PartRFQ

AO4430

Alpha & Omega Semiconductor Inc.In Stock: 150376AO4430 Datasheet

MFR RecommendedRFQ

RJK0354DSP-00#J0

Renesas Electronics CorporationIn Stock: 4193RJK0354DSP-00#J0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DMN3007LSSQ-13 is determined by the following critical parameters:

Electrical Compatibility Criteria:

• Drain to Source Voltage (Vdss) must equal or exceed 30V
• Continuous Drain Current (Id) must equal or exceed 16A at 25°C
• Gate-Source Voltage (Vgs) maximum rating must be ±20V or greater
• Operating temperature range must encompass -55°C to 150°C

Mechanical Compatibility Criteria:

• Package type must be 8-SOIC or equivalent footprint (0.154", 3.90mm Width)
• Mounting type must be Surface Mount
• Moisture Sensitivity Level must be 1 (Unlimited) or equivalent

Regulatory & Compliance Criteria:

• RoHS3 Compliance required
• REACH Unaffected status required

Parts meeting all three criteria categories are classified as direct substitutes. The AO4430 and RJK0354DSP-00#J0 satisfy these requirements with electrical ratings that maintain or exceed the baseline specifications of the DMN3007LSSQ-13.

Parameter Comparison

Engineering Selection Recommendations

DMN3007LSSQ-13 (Primary Selection)

The DMN3007LSSQ-13 maintains Active product status and is the recommended selection for new designs. This part is ROHS3 compliant, carries unlimited moisture sensitivity rating, and is currently in stock with 3226 units available. The device is suitable for applications requiring the specified 30V/16A performance envelope with 2.5W power dissipation.

RJK0354DSP-00#J0 (Preferred Substitute)

The RJK0354DSP-00#J0 from Renesas Electronics Corporation is classified as Active product status, making it suitable for new designs. This part maintains electrical compatibility with equivalent Vdss (30V) and Id (16A) ratings. The RJK0354DSP-00#J0 features lower gate charge (12 nC @ 4.5V) and input capacitance (1740 pF @ 10V) compared to the primary part, which may provide switching speed advantages in certain applications. ROHS3 compliance and unlimited MSL rating are maintained. Packaging is 8-SOIC with identical footprint dimensions. This part is available with 4150 units in stock.

AO4430 (Alternative Substitute)

The AO4430 from Alpha & Omega Semiconductor Inc. is classified as Not For New Designs. While this part exceeds the baseline specifications with 18A continuous drain current and 3W power dissipation, its product status restricts its use to legacy or maintenance applications only. The AO4430 maintains ROHS3 compliance and unlimited MSL rating. Higher gate charge (124 nC @ 10V) and input capacitance (7270 pF @ 15V) may impact switching characteristics. This part is available with 150300 units in stock.

Frequently Asked Questions (FAQ)

Q: Can the AO4430 be used in new product designs?

A: No. The AO4430 is classified as Not For New Designs. New designs must use either the DMN3007LSSQ-13 or RJK0354DSP-00#J0, both of which carry Active product status.

Q: Are all three parts pin-compatible?

A: All three parts use the 8-SOIC package with identical footprint dimensions (0.154", 3.90mm Width). Pin compatibility is maintained across all three devices for surface mount PCB layouts.

Q: What is the primary difference between the RJK0354DSP-00#J0 and DMN3007LSSQ-13?

A: Both parts maintain identical Vdss (30V) and Id (16A) ratings. The RJK0354DSP-00#J0 features significantly lower gate charge (12 nC @ 4.5V versus 64.2 nC @ 10V) and lower input capacitance (1740 pF @ 10V versus 2714 pF @ 15V), which may result in faster switching transitions. The RJK0354DSP-00#J0 is packaged as 8-SOP while the DMN3007LSSQ-13 is 8-SOIC, though both maintain the same footprint dimensions.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All three parts—DMN3007LSSQ-13, AO4430, and RJK0354DSP-00#J0—are ROHS3 compliant and carry unlimited moisture sensitivity rating (MSL 1).

Q: What is the operating temperature range for each part?

A: The DMN3007LSSQ-13 and AO4430 both operate from -55°C to 150°C (TJ). The RJK0354DSP-00#J0 specifies a maximum operating temperature of 150°C (TJ) without a stated minimum, though it is suitable for the same thermal envelope in practical applications.

Q: Can the AO4430 be used as a direct replacement due to its higher current rating?

A: The AO4430 exceeds the baseline specifications with 18A continuous drain current versus 16A. However, its Not For New Designs status prohibits use in new product development. For legacy applications requiring higher current capacity, the AO4430 is electrically compatible but subject to product lifecycle restrictions.

Q: What packaging differences exist between the substitute parts?

A: The DMN3007LSSQ-13 and AO4430 are specified as 8-SOIC. The RJK0354DSP-00#J0 is specified as 8-SOP. All three maintain identical footprint dimensions (0.154", 3.90mm Width) and are compatible with standard 8-pin SOIC PCB layouts.