DMN24H3D6S-13 Equivalent & Substitute Parts

Part Overview

The DMN24H3D6S-13 is an N-Channel MOSFET manufactured by Diodes Incorporated, rated for drain-to-source voltage (BVDSS) between 101V and 250V in a SOT-23 surface mount package. This part is classified as obsolete and requires identification of active equivalent alternatives for new designs and ongoing production support. The obsolete status necessitates substitution with functionally compatible active-status components that maintain electrical and mechanical compatibility within the specified parameter ranges.

Substiute Parts

DMN24H3D6S-13

Diodes IncorporatedIn Stock: 1009DMN24H3D6S-13 Datasheet

Current PartRFQ

DMN24H3D5L-13

Diodes IncorporatedIn Stock: 974DMN24H3D5L-13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete DMN24H3D6S-13 is based on the following criteria derived from the provided parameters:

Primary Substitution Criteria:

• Manufacturer: Diodes Incorporated (same manufacturer, same product family)
• Base Product Number: DMN24 (same base platform)
• Device Type: N-Channel MOSFET
• Package Type: SOT-23 (mechanical and thermal compatibility)
• Drain-to-Source Voltage (BVDSS): 240V (within the specified 101V–250V range of the main part)
• Product Status: Active (ensures ongoing availability and support)
• RoHS Compliance: ROHS3 Compliant (regulatory alignment)
• Moisture Sensitivity Level: 1 (Unlimited) (identical handling requirements)
• REACH Status: REACH Unaffected (regulatory alignment)

The substitute part DMN24H3D5L-13 meets all substitution criteria through identical base product family membership, compatible voltage rating, matching package configuration, and active product status.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: DMN24H3D5L-13

The DMN24H3D5L-13 is the direct substitute for the obsolete DMN24H3D6S-13. Selection is based on the following engineering factors:

1. Product Status Alignment: The substitute part holds Active product status, ensuring long-term availability, manufacturing continuity, and technical support from Diodes Incorporated. The main part's Obsolete status creates supply chain risk and limits future procurement options.

2. Regulatory Compliance: Both parts maintain ROHS3 Compliance and REACH Unaffected status, ensuring compatibility with current environmental and regulatory requirements for manufacturing and distribution.

3. Electrical Compatibility: The substitute's 240V Vdss rating falls within the main part's specified 101V–250V BVDSS range, confirming electrical parameter compatibility for the intended application.

4. Mechanical and Thermal Compatibility: Both parts utilize the SOT-23 surface mount package configuration, ensuring pin-compatible board-level integration without PCB redesign.

5. Handling and Storage: Identical MSL rating (1, Unlimited) confirms that storage, handling, and moisture control procedures remain unchanged during transition.

Selection of DMN24H3D5L-13 eliminates obsolescence risk while maintaining full electrical, mechanical, and regulatory compatibility with the original design specification.

Frequently Asked Questions (FAQ)

Q: Why is the DMN24H3D6S-13 being discontinued?

A: The DMN24H3D6S-13 has reached end-of-life status and is classified as Obsolete. Diodes Incorporated has transitioned the DMN24 product family to active alternatives such as the DMN24H3D5L-13, which offer improved availability and ongoing manufacturing support.

Q: Is the DMN24H3D5L-13 a direct pin-for-pin replacement?

A: Yes. Both parts use the SOT-23-3 package configuration (also designated TO-236-3 or SC-59), ensuring identical pinout and board-level compatibility without PCB modification.

Q: What is the voltage difference between the main part and substitute?

A: The main part specifies a BVDSS range of 101V–250V. The substitute part is rated at 240V, which falls within this range. The substitute's specific 240V rating provides a defined operating point within the acceptable voltage envelope.

Q: Are there any differences in handling or storage requirements?

A: No. Both parts carry identical Moisture Sensitivity Level (MSL) ratings of 1 (Unlimited), indicating no special moisture control measures are required during storage or handling. Standard ESD precautions for MOSFET components apply to both parts.

Q: Does the substitute part meet the same regulatory requirements?

A: Yes. The DMN24H3D5L-13 maintains ROHS3 Compliance and REACH Unaffected status, identical to the main part. No regulatory re-qualification is necessary for the substitution.

Q: What is the inventory status of the substitute part?

A: The DMN24H3D5L-13 is currently available with 871 pieces in stock as new original inventory, providing immediate procurement capability for design transitions and production requirements.

Q: Can I use the substitute part in existing designs without modification?

A: Yes. The substitute part's electrical parameters (240V Vdss, N-Channel MOSFET, SOT-23 package) are compatible with designs specified for the main part's 101V–250V BVDSS range. No circuit redesign or board layout changes are required.