DML10M8LDS-7 Equivalent & Substitute Parts

Part Overview

The DML10M8LDS-7 is an active, automotive-grade power switch/driver manufactured by Diodes Incorporated. This N-Channel MOSFET operates as a high-side output switch with 1:1 input-to-output ratio and on/off interface control. The device is designed for general-purpose power management applications requiring load discharge capability. Current inventory of 1,145 pieces supports immediate availability for production requirements. Substitute parts are identified when original part availability is constrained, when design flexibility permits alternative sourcing, or when supply chain optimization is required while maintaining electrical and mechanical compatibility.

Substiute Parts

DML10M8LDS-7

Diodes IncorporatedIn Stock: 1172DML10M8LDS-7 Datasheet

Current PartRFQ

DML1012LDS-13

Diodes IncorporatedIn Stock: 896DML1012LDS-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DML10M8LDS-7 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Requirements:

• Output Type: N-Channel (must match)
• Output Configuration: High Side (must match)
• Voltage - Supply (Vcc/Vdd): 3.2V ~ 5.5V (must match)
• Voltage - Load: 0.8V ~ 4V (must match)
• Current - Output (Max): 6A (must match)
• Rds On (Typ): 8mOhm (Max) (must match)
• BVDSS: 8V~24V (must match)
• Interface: On/Off (must match)
• Input Type: Non-Inverting (must match)

Mechanical & Packaging Compatibility Requirements:

• Package / Case: 8-PowerVDFN (must match)
• Supplier Device Package: V-DFN3030-8 (Type R) (must match)
• Mounting Type: Surface Mount (must match)
• Packaging: Tape & Reel (TR) (must match)

Compliance & Qualification Requirements:

• Grade: Automotive (must match)
• Qualification: AEC-Q100 (must match)
• RoHS Status: ROHS3 Compliant (must match)
• REACH Status: REACH Unaffected (must match)

The DML1012LDS-13 meets all specified electrical, mechanical, and compliance parameters and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

DML10M8LDS-7 Selection Criteria:

• Primary choice when DML10M8LDS-7 inventory is available and supply continuity is prioritized
• Current inventory of 1,145 pieces supports sustained production schedules
• Active product status ensures long-term availability and technical support

DML1012LDS-13 Selection Criteria:

• Direct parametric equivalent with identical electrical and mechanical specifications
• Suitable for use when DML10M8LDS-7 availability is limited or constrained
• Active product status and AEC-Q100 qualification ensure automotive-grade reliability
• Current inventory of 841 pieces provides alternative sourcing option
• No design modifications required; pin-compatible and functionally equivalent

Compliance Assurance: Both parts maintain identical automotive-grade qualification (AEC-Q100), ROHS3 compliance, and REACH unaffected status. Selection between these parts does not impact regulatory or environmental compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can DML1012LDS-13 be used as a direct replacement for DML10M8LDS-7?

A: Yes. The DML1012LDS-13 is a parametric equivalent with identical electrical specifications, package configuration, and automotive qualification. No circuit modifications are required for substitution.

Q: Are the package dimensions identical between DML10M8LDS-7 and DML1012LDS-13?

A: Yes. Both parts use the V-DFN3030-8 (Type R) package in 8-PowerVDFN case format. PCB layout and thermal management design remain unchanged.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both DML10M8LDS-7 and DML1012LDS-13 carry AEC-Q100 qualification and automotive-grade designation, meeting automotive industry standards.

Q: What is the difference between DML10M8LDS-7 and DML1012LDS-13?

A: The parts are parametrically identical across all electrical, mechanical, and compliance specifications. The difference is in the base product number designation (DML10M8 versus DML1012) and current inventory levels.

Q: Are there any thermal or performance differences between these parts?

A: No. Both parts specify identical Rds On (8mOhm Max), current rating (6A), operating temperature range (-40°C ~ 85°C), and thermal characteristics.

Q: Can these parts be mixed in the same production batch?

A: Yes. Both parts are functionally and mechanically equivalent, allowing mixed sourcing without design or assembly process changes.

Q: What is the supply status of both parts?

A: Both parts maintain active product status with current inventory. DML10M8LDS-7 has 1,145 pieces in stock; DML1012LDS-13 has 841 pieces in stock.