DML-1-05-V-T-SMT Equivalent & Substitute Parts

Part Overview

The DML-1-05-V-T-SMT is a surface mount rectangular connector header manufactured by Adam Tech, featuring 5 positions with 0.118" (3.00mm) pitch spacing. This shrouded, board-to-cable/wire connector is designed for applications requiring solder termination with locking ramp fastening. The product is currently obsolete, making equivalent substitute parts necessary for ongoing system support, maintenance, and new design implementations where compatibility is required.

Substiute Parts

DML-1-05-V-T-SMT

Adam TechIn Stock: 1056DML-1-05-V-T-SMT Datasheet

Current PartRFQ

0436500524

MolexIn Stock: 257120436500524 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DML-1-05-V-T-SMT is determined by strict alignment of the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.118" (3.00mm)
• Number of Positions: 5
• Number of Rows: 1
• Mounting Type: Surface Mount
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Locking Ramp
• Contact Material: Brass
• Contact Finish - Mating: Tin
• Contact Finish - Post: Tin
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The Molex 0436500524 (Micro-Fit 3.0 43650 series) meets all critical substitution parameters and is classified as an active product with current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0436500524 is the qualified substitute for the obsolete DML-1-05-V-T-SMT. Selection is based on:

• Full parameter alignment across all critical electrical and mechanical specifications
• Active product status with current manufacturing and supply chain availability
• ROHS3 compliance and UL94 V-0 flammability rating matching the original specification
• Identical moisture sensitivity level (MSL 1) and environmental operating range compatibility
• Tape & Reel packaging suitable for automated assembly processes

Frequently Asked Questions (FAQ)

Q: Can the Molex 0436500524 be used as a direct replacement for the DML-1-05-V-T-SMT?

A: Yes. Both connectors share identical pitch spacing (0.118" / 3.00mm), position count (5), shrouding configuration (4-wall), termination method (solder), and fastening mechanism (locking ramp). Electrical ratings, material specifications, and compliance certifications are equivalent.

Q: What is the primary difference between these two connectors?

A: The DML-1-05-V-T-SMT is obsolete with limited inventory, while the Molex 0436500524 is an active product with established supply availability. The Molex part uses Liquid Crystal Polymer (LCP) glass-filled insulation versus thermoplastic insulation in the original, and is supplied in Tape & Reel packaging.

Q: Are there any compatibility concerns when substituting?

A: No compatibility concerns exist for applications requiring the specified electrical and mechanical parameters. Both connectors are designed for board-to-cable/wire connections with identical mating interfaces and contact configurations.

Q: What packaging format is the substitute available in?

A: The Molex 0436500524 is supplied in Tape & Reel (TR) format, standard for automated surface mount assembly operations.