DME6P15K Film Capacitor Equivalent & Substitute Parts

Part Overview

The DME6P15K is a 0.15 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) with a 630V DC voltage rating and ±10% tolerance. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and design continuity. The DME6P15K features a polyester metallized dielectric construction in a radial through-hole package, suitable for general-purpose applications requiring stable capacitance across a wide operating temperature range.

Substiute Parts

DME6P15K

Cornell Dubilier Electronics (CDE)In Stock: 826DME6P15K Datasheet

Current PartRFQ

DME6P15K-F

Cornell Dubilier Electronics (CDE)In Stock: 1276DME6P15K-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DME6P15K is based on electrical and mechanical parameter equivalence within the DME series. The substitute part must satisfy the following criteria:

Electrical Parameters (Critical for Substitution):

• Capacitance value: 0.15 µF
• Tolerance: ±10%
• Voltage rating (DC): 630V minimum
• Voltage rating (AC): 250V minimum
• Dielectric material: Polyester, Metallized

Mechanical Parameters (Critical for Substitution):

• Mounting type: Through Hole
• Package type: Radial
• Lead spacing: 0.591" (15.00mm)
• Termination: PC Pins

Compliance Parameters (Relevant for Design Continuity):

• RoHS compliance status
• REACH compliance status

The DME6P15K-F is identified as a direct equivalent within the same DME series, maintaining identical electrical specifications and mechanical footprint while offering active product status and improved compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The DME6P15K-F is a direct functional equivalent to the obsolete DME6P15K. Both components share identical electrical specifications, mechanical dimensions, and lead spacing, ensuring direct board-level compatibility without circuit redesign.

Product Status Consideration: The DME6P15K is classified as obsolete, while the DME6P15K-F maintains active product status. This distinction is significant for long-term supply chain reliability and component availability.

Compliance Consideration: The DME6P15K-F carries ROHS3 compliance certification, whereas the original DME6P15K is RoHS non-compliant. For applications subject to RoHS regulatory requirements, the DME6P15K-F is the appropriate selection. Both parts maintain REACH Unaffected status and share identical ECCN and HTSUS classifications.

Packaging Consideration: The DME6P15K-F is supplied in bulk packaging, whereas the original part number designation does not specify packaging format. This distinction affects procurement logistics but does not impact electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can the DME6P15K-F be used as a direct replacement for the DME6P15K?

A: Yes. The DME6P15K-F is electrically and mechanically equivalent to the DME6P15K. Both components have identical capacitance (0.15 µF), tolerance (±10%), voltage ratings (630V DC / 250V AC), dielectric material (polyester metallized), operating temperature range (-55°C to 125°C), and mechanical footprint (0.591" lead spacing, radial through-hole package). Direct substitution is supported without circuit modification.

Q: What is the primary difference between these two part numbers?

A: The primary differences are product status and compliance certification. The DME6P15K is obsolete, while the DME6P15K-F is active. The DME6P15K-F carries ROHS3 compliance, whereas the DME6P15K is RoHS non-compliant. Electrical and mechanical specifications are identical.

Q: Are there any physical dimension differences between these parts?

A: The lateral dimensions are identical (0.728" L x 0.315" W / 18.50mm x 8.00mm). The maximum seated height differs slightly: DME6P15K is 0.630" (16.00mm), while DME6P15K-F is 0.689" (17.50mm). This minor height variation does not affect standard through-hole board layouts with typical component clearance specifications.

Q: Which part should be selected for new designs?

A: The DME6P15K-F should be selected for new designs. It maintains active product status, ensuring ongoing availability and supply chain continuity. Additionally, ROHS3 compliance certification supports regulatory compliance requirements in most jurisdictions.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both the DME6P15K and DME6P15K-F operate across the identical temperature range of -55°C to 125°C, ensuring equivalent thermal performance in all applications.

Q: What is the lead spacing for these capacitors?

A: Both components feature a lead spacing of 0.591" (15.00mm), supporting direct board-level substitution without PCB modification.