DMC506010R Equivalent & Substitute Parts

Part Overview

The DMC506010R is a dual NPN bipolar junction transistor array manufactured by Panasonic Electronic Components, designed for general-purpose amplification and switching applications. This component is packaged in a 6-SMD flat lead surface mount configuration (SMini6-F3-B) and rated for 50V collector-emitter breakdown voltage with 100mA maximum collector current.

The DMC506010R has been discontinued at DiGi Electronics. Equivalent substitute parts are available from Rohm Semiconductor that maintain electrical compatibility while offering active product status and extended availability.

Substiute Parts

DMC506010R

Panasonic Electronic ComponentsIn Stock: 6166DMC506010R Datasheet

Current PartRFQ

UMX1NFHATN

Rohm SemiconductorIn Stock: 16991UMX1NFHATN Datasheet

SimilarRFQ

UMX1NTN

Rohm SemiconductorIn Stock: 224446UMX1NTN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DMC506010R are qualified based on the following electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Transistor configuration: 2 NPN (Dual) array
• Voltage rating: Collector-emitter breakdown voltage ≥ 50V
• Current rating: Collector current capacity ≥ 100mA
• Power dissipation: Maximum power rating ≥ 150mW
• Frequency performance: Transition frequency ≥ 150MHz
• Operating temperature range: Maximum junction temperature ≥ 150°C

Mechanical Compatibility Criteria:

• Mounting type: Surface mount
• Package classification: 6-pin surface mount configurations
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

The substitute parts listed below meet or exceed all specified parameters and maintain functional equivalence for the DMC506010R in dual NPN transistor array applications.

Parameter Comparison

Engineering Selection Recommendations

UMX1NTN (Rohm Semiconductor) - Primary Substitute

The UMX1NTN is the recommended substitute for the DMC506010R. This part maintains electrical equivalence across all critical parameters: 50V collector-emitter breakdown voltage, 150mA collector current (exceeding the 100mA requirement), 150mW power dissipation, and 180MHz transition frequency. The UMX1NTN is in active product status with extensive inventory availability (224,400 pieces). It carries ROHS3 compliance and MSL 1 rating identical to the original part. The UMX1NTN is supplied in Cut Tape and Digi-Reel packaging formats.

UMX1NFHATN (Rohm Semiconductor) - Secondary Substitute

The UMX1NFHATN provides equivalent electrical performance to the UMX1NTN with the addition of automotive-grade qualification (AEC-Q101). This part is suitable for applications requiring automotive-level reliability and traceability. It is supplied in Tape & Reel packaging with active product status and 16,904 pieces in inventory.

Both substitute parts utilize the UMT6 package (6-TSSOP, SC-88, SOT-363), which differs from the original SMini6-F3-B package. PCB layout modifications are required to accommodate the different package footprint. Both substitutes exceed the original part's electrical specifications and maintain full regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the UMX1NTN directly replace the DMC506010R without circuit modifications?

A: The UMX1NTN provides electrical equivalence for all specified parameters. However, the package footprint differs (UMT6 versus SMini6-F3-B), requiring PCB layout redesign. Pin configuration and electrical function are compatible.

Q: What is the difference between UMX1NTN and UMX1NFHATN?

A: Both parts are electrically identical with 50V breakdown voltage, 150mA collector current, 150mW power rating, and 180MHz transition frequency. The UMX1NFHATN carries AEC-Q101 automotive qualification and is supplied in Tape & Reel packaging, while the UMX1NTN is supplied in Cut Tape and Digi-Reel formats. Selection depends on packaging requirements and automotive compliance needs.

Q: Are the substitute parts RoHS compliant?

A: Yes, both UMX1NTN and UMX1NFHATN are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original DMC506010R specifications.

Q: What are the key electrical differences between the original and substitute parts?

A: The substitute parts exceed the original specifications in collector current (150mA versus 100mA) and transition frequency (180MHz versus 150MHz). Saturation voltage and DC current gain specifications differ at different test conditions but do not prevent functional substitution in general-purpose amplification and switching applications.

Q: Is PCB redesign mandatory when switching from DMC506010R to UMX1NTN?

A: Yes, PCB redesign is required due to package footprint differences. The DMC506010R uses SMini6-F3-B packaging while the UMX1NTN uses UMT6 (6-TSSOP, SC-88, SOT-363) packaging. Pin-to-pin electrical function is maintained, but physical layout must be updated.

Q: What inventory status should I consider for production planning?

A: The DMC506010R is discontinued at DiGi Electronics with 6,100 pieces available. The UMX1NTN has active status with 224,400 pieces in stock, providing superior long-term availability. The UMX1NFHATN has active status with 16,904 pieces available.