DLS2XP6AK44X

Part Overview

The DLS2XP6AK44X is a 15-position D-Sub plug connector with right-angle, through-hole solder termination manufactured by Amphenol CONEC. This connector features a male pin configuration with a 2-row (DA/A) shell size layout and is currently in active product status. The connector is commonly used in electronic equipment requiring standard D-Sub signal interfaces with board-edge and right-angle mounting configurations. Equivalent and substitute parts may be required due to manufacturing lead times, regional availability, packaging preferences, or specific performance parameter requirements.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	15
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Board Edge, Through Hole, Right Angle
Termination	Solder
Current Rating	3A
Voltage Rating	250V
Operating Temperature Range	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the DLS2XP6AK44X are qualified based on the following parameters that define functional interchangeability:

Connector Configuration: 15-position D-Sub plug with male pins
Shell Size: 2 (DA/A) layout
Mounting Type: Through-hole, right-angle orientation
Termination Method: Solder attachment
Electrical Specifications: Voltage and current ratings sufficient for the application
Environmental Compliance: UL94 V-0 flammability rating and RoHS compliance
Mechanical Interface: Mating-side female screwlock (4-40) or housing/shell mounting features

The substitute parts listed below meet these core requirements with variations in contact finish specifications, dielectric materials, and manufacturer-specific design features. All substitutes are active products with equivalent D-Sub connector architectures and solder termination capabilities.

Parameter Comparison

Part Number	Manufacturer	Connector Type	Positions	Mounting Type	Current Rating (A)	Voltage Rating (V)	Operating Temp (°C)	Contact Finish	Shell Material Finish	RoHS Status	Packaging
DLS2XP6AK44X	Amphenol CONEC	Plug, Male Pins	15	Through Hole, Right Angle	3	250	-55 to 105	Gold	Steel	ROHS3	Bulk
09662626817	HARTING	Plug, Male Pins	15	Through Hole, Right Angle	7.5	Not Specified	-55 to 125	Not Specified	Steel	ROHS3	Bulk
D15P13A4GV00LF	Amphenol ICC (FCI)	Plug, Male Pins	15	Through Hole, Right Angle	5	300	-55 to 125	Gold	Steel, Tin-Nickel	RoHS	Tray
D15P13A4GL00LF	Amphenol ICC (FCI)	Plug, Male Pins	15	Through Hole, Right Angle	5	300	-55 to 125	Gold	Steel, Tin-Nickel	RoHS	Tray
D15P13A4GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	15	Through Hole, Right Angle	5	300	-55 to 125	Gold	Steel, Tin-Nickel	ROHS3	Tray
D15P13A6GX00LF	Amphenol ICC (FCI)	Plug, Male Pins	15	Through Hole, Right Angle	5	300	-55 to 125	Gold or Gold, GXT™	Steel, Tin-Nickel	RoHS	Tray

Engineering Selection Recommendations

DLS2XP6AK44X Selection: Suitable for applications requiring ROHS3 compliance with extended long-term material stability. Bulk packaging supports high-volume manufacturing environments. The 3A current rating is appropriate for standard signal-level D-Sub applications within the -55°C to 105°C thermal envelope.

09662626817 (HARTING) Selection: Provides higher current capacity (7.5A) and extended operating temperature range (-55°C to 125°C) compared to the primary part. ROHS3 compliance maintained. Bulk packaging available. Suitable when higher current-carrying capability is required within the same D-Sub architectural framework.

D15P13A4GV00LF, D15P13A4GL00LF, D15P13A4GX00LF, D15P13A6GX00LF (Amphenol ICC/FCI Delta D Series) Selection: All substitute parts offer enhanced electrical specifications with 5A per contact rating and 300V voltage rating, providing performance margin beyond the original specification. Operating temperature extends to 125°C. Tin-nickel plated steel shells offer superior corrosion resistance. Available in tray packaging for component handling and traceability. D15P13A4GX00LF and D15P13A6GX00LF maintain ROHS3 compliance. D15P13A6GX00LF includes precision gold contact finish (30.0µin) suitable for demanding signal integrity requirements.

All substitute parts maintain active product status and UL94 V-0 flammability compliance, ensuring long-term supply viability and consistent electrical safety performance.

Frequently Asked Questions (FAQ)

Q: Can the DLS2XP6AK44X be directly replaced with any D-Sub 15-position plug connector?

A: No. Substitute parts must maintain compatibility across the following parameters: 15-position male pin configuration, 2-row (DA/A) shell size, through-hole right-angle mounting, and solder termination. The mating interface features (female screwlock or housing-mounted fasteners) must also remain consistent with board design specifications.

Q: What is the primary difference between the HARTING 09662626817 and Amphenol CONEC DLS2XP6AK44X?

A: The HARTING part provides 7.5A current capacity versus 3A in the original part, and extends the operating temperature range to 125°C. It does not specify voltage rating in the provided data. Both maintain ROHS3 compliance and steel shell construction. The HARTING part is supplied in bulk packaging.

Q: How do the Amphenol ICC/FCI Delta D series parts differ from the DLS2XP6AK44X?

A: The Delta D series (D15P13A4GV00LF, D15P13A4GL00LF, D15P13A4GX00LF, D15P13A6GX00LF) provide higher current per contact (5A), increased voltage rating (300V), extended operating temperature to 125°C, and tin-nickel plated steel shells instead of bare steel. These parts are supplied in tray packaging. Contact finish specifications vary between models, with D15P13A6GX00LF offering precision gold plating (30.0µin thickness).

Q: Does packaging type affect connector functionality?

A: No. Packaging (bulk versus tray) does not affect electrical or mechanical performance. Bulk packaging is used for direct manufacturing lines, while tray packaging supports component traceability, handling efficiency, and automated assembly operations. Part selection should be based on manufacturing process requirements and inventory management practices.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts maintain RoHS compliance. The DLS2XP6AK44X and 09662626817 are ROHS3 compliant. The Amphenol ICC/FCI parts carry either RoHS or ROHS3 designation, with D15P13A4GX00LF and D15P13A6GX00LF specifically maintaining ROHS3 status.

Q: What does "Delta D" series designation indicate?

A: "Delta D" is the series classification assigned by Amphenol ICC/FCI to this family of 15-position D-Sub connectors. It represents a standardized connector architecture with consistent mechanical and electrical specifications across multiple part variants, differing primarily in contact finish types, flange mounting features, and shell plating options.

Q: Can the DLS2XP6AK44X accommodate applications requiring 5A per contact current?

A: No. The DLS2XP6AK44X is rated at 3A total connector current. For applications requiring 5A per contact, the Amphenol ICC/FCI Delta D series parts (D15P13A4GV00LF, D15P13A4GL00LF, D15P13A4GX00LF, D15P13A6GX00LF) are appropriate substitutes, each providing 5A per contact capacity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message