DLPA200PFC Digital Micromirror Device (DMD) Driver - Equivalent & Substitute Parts

Part Overview

The DLPA200PFC is a Digital Micromirror Device (DMD) driver manufactured by Texas Instruments in a 80-TQFP (12x12) surface mount package. This component is designed for applications requiring advanced imaging capabilities, including 3D projection and medical imaging systems.

The DLPA200PFC is classified as an obsolete product. Identifying equivalent and substitute parts is necessary to support legacy system maintenance, ensure supply chain continuity, and facilitate design transitions to active product alternatives that maintain functional and electrical compatibility.

Substiute Parts

DLPA200PFC

Texas InstrumentsIn Stock: 1127DLPA200PFC Datasheet

Current PartRFQ

DLPA200PFP

Texas InstrumentsIn Stock: 1015DLPA200PFP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DLPA200PFC is determined by the following critical parameters:

Functional Compatibility:

• Base product number must remain DLPA200 to ensure identical core functionality
• Type classification must be Digital Micromirror Device (DMD), Driver
• Application support for 3D and Medical Imaging must be maintained

Electrical & Physical Compatibility:

• Package classification must be 80-TQFP or 80-HTQFP (both are TQFP variants with compatible pinouts)
• Surface mount mounting type must be preserved
• Pin count and pitch must remain consistent with the 12x12mm footprint

Regulatory & Environmental Compliance:

• RoHS3 compliance must be maintained
• REACH unaffected status must be preserved
• ECCN and HTSUS classifications must align

The DLPA200PFP qualifies as a direct substitute based on these parameters. Both parts share the same base product number (DLPA200), identical functional classification, compatible package variants (80-TQFP and 80-HTQFP), and equivalent regulatory compliance profiles.

Parameter Comparison

Engineering Selection Recommendations

For Obsolete Product Replacement:

The DLPA200PFP is the manufacturer-recommended substitute for the DLPA200PFC. The DLPA200PFP maintains active product status with Texas Instruments, ensuring ongoing availability and support. Both parts comply with ROHS3 and REACH requirements, with identical ECCN and HTSUS classifications.

Package Consideration:

The DLPA200PFP features an 80-HTQFP package with an exposed pad, compared to the standard 80-TQFP of the DLPA200PFC. The exposed pad provides enhanced thermal management and is compatible with standard TQFP footprints used in legacy designs. PCB layout verification is required to confirm exposed pad utilization in existing designs.

Supply Chain Continuity:

With 921 units of DLPA200PFP in stock versus 1051 units of the obsolete DLPA200PFC, transitioning to the active substitute part ensures long-term component availability and reduces obsolescence risk in production environments.

Frequently Asked Questions (FAQ)

Q: Can the DLPA200PFP directly replace the DLPA200PFC on existing PCBs?

A: Yes. Both parts share identical pinouts within the TQFP package family, the same 12x12mm footprint dimensions, and compatible surface mount requirements. The exposed pad on the DLPA200PFP is an enhancement that does not prevent compatibility with standard TQFP footprints.

Q: What is the difference between 80-TQFP and 80-HTQFP packages?

A: The 80-HTQFP variant includes an exposed thermal pad beneath the package, improving heat dissipation. Both package types maintain the same external pin configuration, pitch, and footprint compatibility for the DLPA200 series.

Q: Are there regulatory compliance differences between these parts?

A: No. Both the DLPA200PFC and DLPA200PFP maintain identical RoHS3 compliance, REACH unaffected status, EAR99 ECCN classification, and 8542.39.0001 HTSUS code.

Q: Why is the DLPA200PFC classified as obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The DLPA200PFP represents the active continuation of the DLPA200 base product line and is the recommended path for new designs and legacy system support.

Q: What is the moisture sensitivity level difference?

A: The DLPA200PFC specifies MSL 2 (1 Year), while the DLPA200PFP lists MSL as Not Applicable. This reflects different packaging and storage specifications between the two variants. Standard moisture control practices for surface mount components remain applicable during assembly.

Q: Are both parts suitable for 3D and medical imaging applications?

A: Yes. Both the DLPA200PFC and DLPA200PFP are specified for identical applications including 3D projection and medical imaging systems.