DL4148-TP Equivalent & Substitute Parts

Part Overview

The DL4148-TP is a general-purpose switching diode manufactured by Micro Commercial Co, rated for 75 V DC reverse voltage and 150 mA average rectified current in a Surface Mount Mini MELF package. This component is classified as Obsolete, necessitating identification of equivalent and substitute parts for ongoing design requirements and production continuity. Equivalent alternatives are available from active manufacturers with comparable or enhanced electrical characteristics and modern product status.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	75	V
Current - Average Rectified (Io)	150	mA
Voltage - Forward (Vf) (Max) @ If	1 V @ 10 mA	V
Reverse Recovery Time (trr)	4	ns
Current - Reverse Leakage @ Vr	5	µA @ 75 V
Capacitance @ Vr, F	4	pF @ 0V, 1MHz
Mounting Type	Surface Mount	—
Package / Case	DO-213AC, MINI-MELF, SOD-80	—
Operating Temperature - Junction (Max)	175	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the DL4148-TP are classified based on electrical parameter compatibility and package form factor. The primary substitution criteria are:

Critical Parameters for Substitution:

Voltage - DC Reverse (Vr) (Max): 75 V minimum
Current - Average Rectified (Io): 150 mA minimum
Reverse Recovery Time (trr): 4 ns or faster
Mounting Type: Surface Mount
Package compatibility: Mini MELF or equivalent form factors

Substitution Categories:

Direct Parametric Equivalents maintain identical or superior electrical specifications with the same 75 V / 150 mA rating and Mini MELF packaging. These parts are pin-compatible and functionally interchangeable.

Enhanced Voltage Equivalents provide higher reverse voltage ratings (100 V) while maintaining 150 mA current capacity. These parts are suitable for applications where the original 75 V specification provides margin, and the higher voltage rating offers additional design flexibility.

Higher Current Equivalents provide increased current capacity (200 mA) at lower voltage ratings (50 V). These parts are suitable only for applications where the circuit voltage does not exceed 50 V and higher current capacity is beneficial.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vr (Max) [V]	Io [mA]	Vf (Max) [V]	trr [ns]	Ir @ Vr [µA]	Package	Product Status	Temp Junction (Max) [°C]
DL4148-TP	Micro Commercial Co	75	150	1.0 @ 10 mA	4	5 @ 75 V	Mini MELF (SOD-80)	Obsolete	175
LL4148	Good-Ark Semiconductor	75	150	1.0 @ 10 mA	4	5 @ 75 V	Mini MELF (SOD-80)	Active	175
CDSL4148-G	Comchip Technology	75	150	1.0 @ 100 mA	4	2.5 @ 75 V	Mini MELF (SOD-80)	Obsolete	175
LS4148-GS08	Vishay General Semiconductor	75	150	1.0 @ 50 mA	8	5 @ 75 V	Mini MELF (SOD-80)	Active	175
LS4148-GS18	Vishay General Semiconductor	75	150	1.0 @ 50 mA	8	5 @ 75 V	Mini MELF (SOD-80)	Active	175
1N4148W-TP	Micro Commercial Co	100	150	1.25 @ 150 mA	4	1 @ 75 V	SOD-123	Active	150
PMLL4153,115	Nexperia USA Inc.	50	200	0.88 @ 50 mA	4	0.05 @ 50 V	Mini MELF (SOD-80)	Active	200

Engineering Selection Recommendations

For Direct Replacement (Same Electrical and Package Specifications):

The LL4148 from Good-Ark Semiconductor is the primary direct substitute for the DL4148-TP. This part maintains identical electrical parameters (75 V, 150 mA, 4 ns recovery time) and Mini MELF packaging with Active product status, ensuring long-term availability and supply chain continuity.

For Automotive Applications:

The LS4148-GS08 and LS4148-GS18 from Vishay General Semiconductor are qualified to AEC-Q101 automotive standards and maintain the 75 V / 150 mA specification with Mini MELF packaging. These parts are suitable for applications requiring automotive-grade components. The reverse recovery time is 8 ns, which remains within small-signal diode performance parameters.

For Enhanced Voltage Margin:

The 1N4148W-TP from Micro Commercial Co provides 100 V reverse voltage rating with identical 150 mA current capacity and 4 ns recovery time. This part is suitable for applications where higher voltage margin is required. The package changes to SOD-123, which is a smaller form factor. Operating temperature maximum is 150°C compared to 175°C for the original part.

For Higher Current Applications:

The PMLL4153,115 from Nexperia USA Inc. provides 200 mA current capacity with 4 ns recovery time and Mini MELF packaging. This part is limited to 50 V reverse voltage and is suitable only for circuits operating below 50 V. Operating temperature maximum is 200°C.

Compliance Considerations:

All substitute parts listed maintain ROHS3 compliance, MSL Level 1 (Unlimited), and REACH Unaffected status, consistent with the original DL4148-TP specifications.

Frequently Asked Questions (FAQ)

Q: Can the LL4148 directly replace the DL4148-TP without circuit modification?

A: Yes. The LL4148 maintains identical electrical specifications (75 V, 150 mA, 4 ns recovery time) and Mini MELF packaging. No circuit modification is required for direct substitution.

Q: What is the difference between the LS4148-GS08 and LS4148-GS18?

A: Both parts are electrically identical with 75 V, 150 mA ratings and Mini MELF packaging. The primary difference is the manufacturing date code designation (GS08 vs GS18). Both are AEC-Q101 qualified and suitable for automotive applications.

Q: Can the 1N4148W-TP be used in place of the DL4148-TP?

A: The 1N4148W-TP is electrically compatible with higher voltage margin (100 V vs 75 V) and identical current rating (150 mA). However, the package changes from Mini MELF to SOD-123, which is a smaller form factor. PCB layout modification is required. The maximum operating temperature is 150°C versus 175°C for the original part.

Q: Is the PMLL4153,115 suitable as a substitute?

A: The PMLL4153,115 is suitable only for circuits operating at 50 V or below. It provides higher current capacity (200 mA) and higher operating temperature (200°C), but the reduced voltage rating (50 V) makes it incompatible with the original 75 V specification. Use only if circuit voltage does not exceed 50 V.

Q: What is the significance of the reverse recovery time (trr) parameter?

A: Reverse recovery time determines the speed at which the diode transitions from conducting to blocking state. The DL4148-TP specifies 4 ns. The LS4148-GS08 and LS4148-GS18 specify 8 ns, which is acceptable for small-signal applications but represents slower switching. For high-frequency switching applications, the 4 ns specification is preferred.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance, consistent with the original DL4148-TP.

Q: What is the difference between Mini MELF and SOD-123 packages?

A: Mini MELF (SOD-80) and SOD-123 are both surface mount packages for small-signal diodes. Mini MELF is a cylindrical form factor, while SOD-123 is a rectangular form factor. SOD-123 is smaller and requires different PCB footprint design. The 1N4148W-TP uses SOD-123 packaging, requiring PCB layout modification if substituting for the Mini MELF DL4148-TP.

Q: Can I use the CDSL4148-G as a substitute?

A: The CDSL4148-G maintains identical electrical specifications (75 V, 150 mA, 4 ns recovery time) and Mini MELF packaging. However, this part is classified as Obsolete, similar to the DL4148-TP. For long-term supply chain continuity, the Active-status LL4148 or Vishay LS4148 series are preferred alternatives.

Q: What does AEC-Q101 qualification mean?

A: AEC-Q101 is an automotive industry standard qualification for discrete semiconductors. Parts meeting this qualification (LS4148-GS08 and LS4148-GS18) are suitable for automotive applications and undergo additional reliability and quality testing.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message