DIP2415 Solid State Relay - Equivalent & Substitute Parts

Part Overview

The DIP2415 is a Solid State SPST-NO (Single Pole Single Throw - Normally Open) relay manufactured by Sensata-Crydom, designed for AC switching applications with zero-cross detection. This component operates with a load voltage range of 20V to 280V and supports a maximum load current of 1.5A. The device is packaged in a 16-DIP (0.300", 7.62mm) configuration with 4 leads and through-hole termination.

The DIP2415 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

DIP2415

Sensata-CrydomIn Stock: 829DIP2415 Datasheet

Current PartRFQ

SDI2415

Sensata-CrydomIn Stock: 1329SDI2415 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DIP2415 is determined by the following critical parameters:

• Circuit Configuration: Must be SPST-NO (1 Form A)
• Output Type: Must be AC with Zero Cross detection
• Load Current Rating: Must be 1.5A or greater
• Package / Case: Must be 16-DIP (0.300", 7.62mm), 4 Leads
• Mounting Type: Must be Through Hole
• Termination Style: Must be PC Pin
• Voltage - Load Range: Must encompass or exceed the 20V ~ 280V operating range

The SDI2415 meets all substitution criteria. While the SDI2415 supports a lower minimum voltage (12V vs. 20V), this represents an expanded operational range that maintains full compatibility with the original DIP2415 specifications.

Parameter Comparison

Engineering Selection Recommendations

The SDI2415 is the direct substitute for the DIP2415. Both components are manufactured by Sensata-Crydom and share identical electrical and mechanical specifications with the exception of the minimum load voltage threshold.

The SDI2415 is classified as Active product status, ensuring ongoing availability and supply chain continuity. The SDI2415 is RoHS3 Compliant, meeting current environmental and regulatory requirements. Both parts maintain REACH Unaffected status and EAR99 export classification.

The expanded voltage range of the SDI2415 (12V minimum vs. 20V minimum) does not compromise compatibility with applications designed for the DIP2415. The SDI2415 maintains the same 280V maximum voltage rating and identical 1.5A load current specification.

Frequently Asked Questions (FAQ)

Q: Can the SDI2415 be used as a direct replacement for the DIP2415 in existing designs?

A: Yes. The SDI2415 is electrically and mechanically compatible with the DIP2415. Both components feature identical SPST-NO circuit configuration, AC zero-cross output type, 1.5A load current rating, and 16-DIP package geometry. The SDI2415 supports a lower minimum voltage (12V vs. 20V), which expands rather than restricts operational capability.

Q: What is the significance of the voltage range difference between DIP2415 and SDI2415?

A: The DIP2415 operates from 20V to 280V, while the SDI2415 operates from 12V to 280V. The SDI2415's lower minimum voltage extends the component's usability to lower-voltage applications. For applications operating at or above 20V, both components perform identically.

Q: Are there any compliance or certification differences between these parts?

A: The SDI2415 is RoHS3 Compliant, while the DIP2415 does not specify RoHS compliance. Both parts are REACH Unaffected and carry EAR99 export classification. The SDI2415's active product status ensures continued manufacturer support and supply availability.

Q: Is the 16-DIP package footprint identical between both parts?

A: Yes. Both the DIP2415 and SDI2415 use the 16-DIP (0.300", 7.62mm) package with 4 leads and PC pin termination. No PCB layout modifications are required for substitution.

Q: What is the difference between the DIP and SDI series designations?

A: The DIP2415 belongs to the DIP series (obsolete), while the SDI2415 belongs to the SDI series (active). Both are Sensata-Crydom solid state relay products with identical functional specifications. The series designation reflects product line evolution and manufacturing continuity.