DIN-096CSC-W-KV 96-Position DIN Connector Receptacle Equivalent & Substitute Parts

Part Overview

The DIN-096CSC-W-KV is a 96-position DIN 41612 connector receptacle manufactured by 3M, featuring female sockets with gold plating for through-hole PCB mounting. This connector is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations. The part operates across the industrial temperature range of -55°C to 125°C with a 3A current rating and UL94 V-0 flammability compliance.

Key Parameters

Parameter	Value
Manufacturer Part Number	DIN-096CSC-W-KV
Manufacturer	3M
Series	DIN 41612
Connector Type	Receptacle, Female Sockets
Number of Positions	96
Pitch	0.100" (2.54mm)
Number of Rows	3
Style	C
Mounting Type	Through Hole
Termination	Solder
Contact Finish	Gold
Operating Temperature	-55°C to 125°C
Current Rating	3A
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the DIN-096CSC-W-KV is determined by the following critical parameters:

Mandatory Matching Parameters:

Connector Type: Receptacle, Female Sockets
Number of Positions: 96
Pitch: 0.100" (2.54mm)
Number of Rows: 3
Style: C
Mounting Type: Through Hole
Operating Temperature Range: -55°C to 125°C
Material Flammability Rating: UL94 V-0

Allowable Variations:

Termination Type: Solder, Kinked Pin with Solder, or Press-Fit
Contact Finish: Gold or Gold-Palladium
Current Rating: Equal to or greater than 2A (original part rated 3A)
Product Status: Active preferred; obsolete acceptable
RoHS Compliance: ROHS3 Compliant or RoHS Compliant acceptable
Insulation Material: PBT, PA, PCT, or Polyester variants with glass filling

Substitute parts are grouped by manufacturer (HARTING, TE Connectivity) and classified by contact finish composition and termination method. All listed substitutes maintain dimensional and electrical compatibility with the original DIN-096CSC-W-KV specification.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Positions	Pitch	Rows	Style	Termination	Contact Finish	Current Rating (A)	Operating Temp (°C)	RoHS Status	Product Status
DIN-096CSC-W-KV	3M	96	0.100" (2.54mm)	3	C	Solder	Gold	3	-55 to 125	RoHS Compliant	Obsolete
09032962855	HARTING	96	0.100" (2.54mm)	3	C	Kinked Pin, Solder	Gold or Gold-Palladium	2	-55 to 125	ROHS3 Compliant	Active
09032966824222	HARTING	96	0.100" (2.54mm)	3	C	Solder	Gold-Palladium	2	-55 to 125	ROHS3 Compliant	Active
09032966841	HARTING	96	0.100" (2.54mm)	3	C	Solder	Gold-Palladium	2	-55 to 125	ROHS3 Compliant	Active
09032966845222	HARTING	96	0.100" (2.54mm)	3	C	Kinked Pin, Solder	Gold-Palladium	2	-55 to 125	ROHS3 Compliant	Active
09032967855	HARTING	96	0.100" (2.54mm)	3	C	Kinked Pin, Solder	Gold-Palladium	2	-55 to 125	ROHS3 Compliant	Active
1-1393640-0	TE Connectivity AMP Connectors	96	0.100" (2.54mm)	3	C	Solder	Gold or Gold-Palladium	—	-55 to 125	RoHS Compliant	Active
1-1393642-6	TE Connectivity AMP Connectors	96	0.100" (2.54mm)	3	C	Wire Wrap	Gold or Gold-Palladium	—	-55 to 125	ROHS3 Compliant	Active
1-148059-5	TE Connectivity AMP Connectors	96	0.100" (2.54mm)	3	C	Press-Fit	Gold	—	-55 to 125	ROHS3 Compliant	Active
148059-5	TE Connectivity AMP Connectors	96	0.100" (2.54mm)	3	C	Press-Fit	Gold	—	-55 to 125	RoHS non-compliant	Active
2-1393640-4	TE Connectivity AMP Connectors	96	0.100" (2.54mm)	3	C	Solder	Gold or Gold-Palladium	—	-55 to 125	ROHS3 Compliant	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Compliance):

HARTING 09032966841 and 09032966824222 are direct functional equivalents with active product status and ROHS3 compliance. Both maintain the 96-position, 0.100" pitch, 3-row C-style configuration with solder termination. The primary difference is contact finish composition (Gold-Palladium vs. Gold), which does not affect electrical compatibility. Current rating is 2A versus the original 3A; applications requiring the full 3A rating should be evaluated for margin.

TE Connectivity 2-1393640-4 and 1-1393640-0 provide solder-terminated alternatives with ROHS3 and RoHS compliance respectively. These parts are classified under the Eurocard series and maintain full position loading with compatible electrical and thermal specifications.

Alternative Termination Options:

HARTING 09032962855, 09032966845222, and 09032967855 feature kinked pin termination combined with solder, offering enhanced mechanical retention during assembly. These remain electrically and dimensionally compatible.

TE Connectivity 1-1393642-6 provides wire wrap termination for applications requiring this connection method, with ROHS3 compliance and active status.

TE Connectivity 1-148059-5 and 148059-5 employ press-fit termination, eliminating solder requirements. The ROHS3-compliant variant (1-148059-5) is preferred for new designs; the non-compliant variant (148059-5) is suitable for legacy system maintenance only.

Compliance Considerations:

All HARTING substitutes carry ROHS3 compliance. TE Connectivity options are available in both ROHS3 and RoHS variants. For new designs, ROHS3-compliant parts are required. Legacy systems may accept RoHS non-compliant alternatives if original specifications permit.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09032966841 directly replace the 3M DIN-096CSC-W-KV?

A: Yes, with current rating consideration. The HARTING part maintains identical mechanical and electrical specifications: 96 positions, 0.100" pitch, 3 rows, C-style, through-hole solder termination, and -55°C to 125°C operating range. The current rating is 2A versus the original 3A. Applications operating below 2A have no restriction. Applications requiring the full 3A rating must be evaluated for margin or alternative parts selected.

Q: What is the difference between Gold and Gold-Palladium contact finishes?

A: Both finishes provide equivalent electrical performance and corrosion resistance within the specified operating temperature range. Gold-Palladium offers enhanced wear resistance in high-cycle mating applications. For static or low-cycle applications, either finish is acceptable. Contact finish selection should align with application duty cycle requirements.

Q: Are TE Connectivity Eurocard series connectors compatible with DIN 41612 specifications?

A: Yes. TE Connectivity Eurocard series connectors conform to DIN 41612 dimensional and electrical standards. The 96-position, 0.100" pitch, 3-row C-style configuration ensures mechanical and electrical compatibility with DIN-096CSC-W-KV applications.

Q: What is the difference between solder, kinked pin, and press-fit termination?

A: Solder termination requires wave or reflow soldering to the PCB. Kinked pin termination combines solder with mechanical retention through pin deformation. Press-fit termination uses spring-loaded contacts that compress into plated PCB holes, eliminating solder. All three methods provide equivalent electrical connections; termination selection depends on assembly process capability and PCB design.

Q: Should I use ROHS3-compliant or RoHS non-compliant parts?

A: ROHS3-compliant parts are required for new designs and systems subject to current regulatory requirements. RoHS non-compliant parts (such as 148059-5) are acceptable only for legacy system maintenance where original specifications permit. Verify regulatory requirements for your application before part selection.

Q: Does the number of positions loaded affect substitution?

A: The DIN-096CSC-W-KV specifies all 96 positions loaded. TE Connectivity 1-1393640-0 specifies 64 positions loaded. This difference indicates reduced contact density and may affect signal integrity in high-density applications. For direct replacement, select parts with all 96 positions loaded.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message