DIN-064RPB-DPS-TR Equivalent & Substitute Parts

Part Overview

The DIN-064RPB-DPS-TR is a 96-position DIN 41612 backplane connector plug with male pins, manufactured by 3M. This connector features gold-plated press-fit termination and is designed for through-hole PCB mounting. The product is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and legacy equipment support.

Substiute Parts

DIN-064RPB-DPS-TR

3MIn Stock: 1141DIN-064RPB-DPS-TR Datasheet

Current PartRFQ

09791642950

HARTINGIn Stock: 98609791642950 Datasheet

MFR RecommendedRFQ

1-5174108-1

TE Connectivity AMP ConnectorsIn Stock: 11471-5174108-1 Datasheet

MFR RecommendedRFQ

86094647891755E1LF

Amphenol ICC (FCI)In Stock: 121786094647891755E1LF Datasheet

MFR RecommendedRFQ

86094647896765LF

Amphenol ICC (FCI)In Stock: 115886094647896765LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DIN-064RPB-DPS-TR is determined by the following critical parameters:

• Connector Configuration: 96 positions, 64 positions loaded, 3 rows, 0.100" (2.54mm) pitch
• Connector Type: Plug or Header with male pins (mechanical interface compatibility)
• Series Compatibility: DIN 41612 or Eurocard series (standardized mechanical and electrical interface)
• Mounting Method: Through-hole PCB mounting
• Operating Temperature: -55°C ~ 125°C range
• Contact Material: Gold or gold-palladium finish
• Flammability Rating: UL94 V-0

The substitute parts listed below meet these core parameters and are available from active manufacturers, providing direct functional equivalence for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 09791642950 (HARTING)

The HARTING 09791642950 provides the closest functional match to the DIN-064RPB-DPS-TR. Both connectors share identical mechanical specifications (96 positions, 64 loaded, 3 rows, 0.100" pitch), DIN 41612 series compatibility, and press-fit termination. The HARTING part is currently in active production status with ROHS3 compliance, addressing the obsolescence of the original 3M component. The current rating of 2A is lower than the original 3A specification; applications requiring the full 3A rating must evaluate this parameter against actual circuit requirements.

Secondary Substitutes: 86094647891755E1LF and 86094647896765LF (Amphenol ICC)

Both Amphenol ICC parts maintain the core 96-position, 64-loaded configuration with 0.100" pitch and 3-row layout. These connectors are active products with RoHS compliance. The primary distinction is termination method: wire wrap (86094647891755E1LF) versus solder (86094647896765LF). Both parts have a current rating of 1.5A, which is lower than the original specification. Selection between these two depends on PCB assembly process compatibility and termination requirements.

Alternative Consideration: 1-5174108-1 (TE Connectivity)

The TE Connectivity 1-5174108-1 is a receptacle connector (female sockets) rather than a plug (male pins). This part is mechanically and electrically compatible within the DIN 41612/Eurocard ecosystem but represents a different connector gender. This part is suitable only for applications where the mating interface has been redesigned or where a receptacle is functionally required.

Compliance Considerations

All substitute parts are RoHS compliant, addressing regulatory requirements that the obsolete DIN-064RPB-DPS-TR does not meet. Applications subject to RoHS directives must transition to one of the listed substitutes.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09791642950 directly replace the 3M DIN-064RPB-DPS-TR?

A: The HARTING part is mechanically and electrically compatible for the same 96-position, 64-loaded DIN 41612 interface. However, the current rating is 2A versus the original 3A. Verify that your application does not require the full 3A rating. The press-fit termination method is identical, allowing direct PCB mounting compatibility.

Q: What is the difference between the two Amphenol ICC substitutes?

A: Both 86094647891755E1LF and 86094647896765LF share identical electrical and mechanical specifications. The difference is termination: 86094647891755E1LF uses wire wrap termination, while 86094647896765LF uses solder termination. Select based on your PCB assembly process and manufacturing equipment compatibility.

Q: Why is the TE Connectivity 1-5174108-1 listed as a substitute if it is a receptacle?

A: The TE Connectivity part is included because it maintains the same 96-position, 64-loaded configuration and 0.100" pitch within the Eurocard series. It is a functional substitute only if your application requires a receptacle connector or if the mating interface has been redesigned. It cannot directly replace a plug connector in existing assemblies.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitutes are RoHS compliant (ROHS3 or RoHS Compliant status). The original DIN-064RPB-DPS-TR is RoHS non-compliant. Applications subject to RoHS regulations must use one of the listed substitutes.

Q: What is the impact of lower current ratings on the Amphenol ICC parts?

A: The Amphenol ICC substitutes are rated for 1.5A, compared to the original 3A rating. Evaluate your circuit's actual current requirements. If your application operates below 1.5A, these parts are suitable. If sustained currents exceed 1.5A, the HARTING 09791642950 (2A rating) or original specifications must be maintained through alternative sourcing strategies.

Q: Can I use these substitutes interchangeably in the same assembly?

A: No. Each substitute has distinct termination methods (press-fit, wire wrap, or solder) and current ratings. Select a single substitute based on your PCB assembly process, termination capability, and current requirements. Mixing different connector types in a single assembly is not recommended.