DIN-064CSD-S1L-SH Equivalent & Substitute Parts

Part Overview

The DIN-064CSD-S1L-SH is a 96-position DIN 41612 backplane connector receptacle manufactured by 3M, featuring female sockets with gold contact finish and through-hole solder termination. This connector is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance, repairs, and new designs requiring compatible interconnect solutions.

Substiute Parts

DIN-064CSD-S1L-SH

3MIn Stock: 975DIN-064CSD-S1L-SH Datasheet

Current PartRFQ

09027646824

HARTINGIn Stock: 97309027646824 Datasheet

MFR RecommendedRFQ

09032642825

HARTINGIn Stock: 123609032642825 Datasheet

MFR RecommendedRFQ

09032646825

HARTINGIn Stock: 194809032646825 Datasheet

MFR RecommendedRFQ

09032647825

HARTINGIn Stock: 120309032647825 Datasheet

MFR RecommendedRFQ

09034646824

HARTINGIn Stock: 88209034646824 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DIN-064CSD-S1L-SH is determined by the following critical parameters:

Primary Matching Criteria:

• Series: DIN 41612
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 96
• Number of Positions Loaded: 64
• Pitch: 0.100" (2.54mm)
• Number of Rows: 3
• Style: C
• Mounting Type: Through Hole
• Termination: Solder
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Compatibility Factors:

• Operating Temperature Range: -55°C ~ 125°C
• Contact Finish: Gold or Gold-Palladium
• Current Rating: 2A or higher

All substitute parts listed maintain the core DIN 41612 Series C configuration with 96 positions, 64 loaded, and 3-row through-hole solder termination. Variations in contact finish (Gold vs. Gold-Palladium), current rating (2A vs. 3A), and insulation material composition are acceptable within the DIN 41612 standard specification framework.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (96-Position, 3-Row, Style C Configuration):

The HARTING parts 09032642825, 09032646825, 09032647825, and 09034646824 maintain full dimensional and electrical compatibility with the DIN-064CSD-S1L-SH. All four parts are active products with UL94 V-0 flammability certification and MSL 1 rating. HARTING parts 09032642825 and 09034646824 provide specified operating temperature ranges (-55°C ~ 125°C) and current ratings (2A), ensuring predictable performance in thermal and electrical stress conditions. Parts 09032646825 and 09032647825 lack specified operating temperature and current rating data but maintain the required DIN 41612 Series C mechanical and electrical framework.

Secondary Substitute (64-Position, 2-Row, Style B Configuration):

The HARTING part 09027646824 represents a reduced-position alternative with 64 total positions (all loaded) in a 2-row Style B configuration. This part is suitable only for applications where the connector footprint can accommodate a 2-row layout and where 64 contact positions satisfy functional requirements. This part is not a direct mechanical replacement for the 3-row Style C configuration.

Compliance Considerations:

HARTING substitute parts 09032642825, 09032646825, 09032647825, and 09034646824 carry ROHS3 compliance certification, supporting regulatory requirements in markets with RoHS directives. The original 3M part does not specify RoHS status. All substitute parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity classification, ensuring compatibility with standard PCB assembly and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can HARTING part 09032642825 directly replace the 3M DIN-064CSD-S1L-SH?

A: Yes. Both parts share identical DIN 41612 Series C configuration with 96 positions, 64 loaded, 3 rows, 0.100" pitch, through-hole solder termination, and UL94 V-0 flammability rating. HARTING 09032642825 specifies -55°C ~ 125°C operating temperature and 2A current rating, compared to the original part's 3A rating. The lower current rating must be evaluated against application requirements.

Q: What is the difference between HARTING parts 09032642825, 09032646825, 09032647825, and 09034646824?

A: All four parts maintain identical mechanical configuration (96 positions, 64 loaded, 3 rows, Style C). Differences include contact finish (Gold vs. Gold-Palladium vs. unspecified), current rating (2A vs. unspecified), and classification level (Class 1, 2, or 3). Contact finish and classification level affect signal integrity and environmental performance characteristics within the DIN 41612 standard.

Q: Is HARTING 09027646824 compatible with the original DIN-064CSD-S1L-SH?

A: HARTING 09027646824 is not a direct mechanical replacement. This part features 64 total positions in a 2-row Style B configuration, whereas the original part is a 3-row Style C connector. Compatibility depends on whether the application can accommodate a different physical footprint and reduced position count.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by DIN 41612 series compliance, connector type (receptacle, female sockets), position count (96 total, 64 loaded for primary substitutes), row configuration (3 rows for primary substitutes), pitch (0.100"), mounting type (through hole), termination method (solder), and flammability rating (UL94 V-0). Operating temperature range and current rating are secondary factors that must be evaluated against specific application requirements.

Q: Are all substitute parts available in the same packaging format?

A: All HARTING substitute parts are supplied in bulk packaging. The original 3M part packaging specification is not provided. Packaging format differences may affect procurement, handling, and inventory management but do not affect electrical or mechanical compatibility.

Q: Do substitute parts require PCB layout modifications?

A: No. All primary substitute parts (09032642825, 09032646825, 09032647825, 09034646824) maintain identical DIN 41612 Series C footprint, pitch, and through-hole termination pattern. Direct PCB layout compatibility is maintained without modification. HARTING 09027646824 requires PCB layout evaluation due to different row configuration.