DIN-064CSB-PSL-TR 96-Position DIN Connector Receptacle Equivalent & Substitute Parts

Part Overview

The DIN-064CSB-PSL-TR is a 96-position DIN 41612 connector receptacle with female sockets, gold plating, and through-hole termination. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance, repairs, and new designs requiring compatible backplane connectivity.

Substiute Parts

DIN-064CSB-PSL-TR

3MIn Stock: 1109DIN-064CSB-PSL-TR Datasheet

Current PartRFQ

09032646852

HARTINGIn Stock: 91009032646852 Datasheet

MFR RecommendedRFQ

09032646862

HARTINGIn Stock: 103509032646862 Datasheet

MFR RecommendedRFQ

208458096001026

KYOCERA AVXIn Stock: 927208458096001026 Datasheet

MFR RecommendedRFQ

86094648194755E3LF

Amphenol ICC (FCI)In Stock: 107186094648194755E3LF Datasheet

MFR RecommendedRFQ

9-106203-1

TE Connectivity AMP ConnectorsIn Stock: 9609-106203-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DIN-064CSB-PSL-TR is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 96
• Number of Positions Loaded: 64
• Pitch: 0.100" (2.54mm)
• Number of Rows: 3
• Style: C
• Mounting Type: Through Hole
• Termination: Press-Fit
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Operating Temperature Range: Substitute must support the original range or exceed it
• Current Rating: Substitute must meet or exceed the original rating
• Contact Finish: Gold or Gold-Palladium acceptable
• Series: DIN 41612 or equivalent series with identical mechanical and electrical specifications
• RoHS Compliance: Preferred for new designs but not mandatory for direct substitution

All five substitute parts meet these criteria and are mechanically and electrically compatible with the original DIN-064CSB-PSL-TR.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Existing Systems): The 208458096001026 (KYOCERA AVX) and 86094648194755E3LF (Amphenol ICC) maintain the original operating temperature range of -55°C ~ 125°C and meet or exceed the 3A current rating. Both are active products with current RoHS compliance, making them suitable for direct substitution in legacy systems.

For New Designs with Temperature Constraints: The 9-106203-1 (TE Connectivity) supports the full -55°C ~ 125°C operating range and carries ROHS3 compliance. This part is recommended for applications requiring the original thermal specifications.

For Extended Temperature Range: The 208458096001026 (KYOCERA AVX) extends the upper temperature limit to 125°C and lower limit to -65°C, providing additional thermal margin for demanding environments.

For RoHS3 Compliance Priority: All substitute parts except 86094648194755E3LF carry ROHS3 certification. The HARTING parts (09032646852 and 09032646862) are ROHS3 compliant but operate within a reduced temperature range of -40°C ~ 105°C.

Current Rating Considerations: The HARTING parts (09032646852 and 09032646862) are rated at 2A, below the original 3A specification. The Amphenol ICC part (86094648194755E3LF) is rated at 1.5A. Applications requiring the full 3A current rating should use the KYOCERA AVX part (208458096001026) or TE Connectivity part (9-106203-1).

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating than the original? A: No. The substitute part must meet or exceed the original current rating of 3A. Using a part with lower current capacity may result in connector overheating and system failure. Only the 208458096001026 (KYOCERA AVX) and 9-106203-1 (TE Connectivity) meet this requirement.

Q: Are all substitute parts mechanically compatible with the original PCB footprint? A: Yes. All substitute parts share identical mechanical specifications: 96 positions, 64 loaded, 0.100" pitch, 3 rows, Style C, through-hole mounting, and press-fit termination. PCB layout modifications are not required.

Q: What is the difference between Gold and Gold-Palladium contact finishes? A: Both finishes are acceptable for this connector category. Gold-Palladium (offered by HARTING parts 09032646852 and 09032646862) provides equivalent electrical performance and contact reliability as pure Gold finishes.

Q: Which substitute part should I use if my application operates below -40°C? A: The 208458096001026 (KYOCERA AVX) extends the lower temperature limit to -65°C, matching the original specification. The HARTING parts are limited to -40°C minimum and are not suitable for colder environments.

Q: Are all substitute parts RoHS compliant? A: Four of the five substitute parts carry RoHS3 compliance. The 86094648194755E3LF (Amphenol ICC) carries RoHS compliance. The original DIN-064CSB-PSL-TR is RoHS non-compliant. For new designs, RoHS-compliant substitutes are recommended.

Q: What is the difference between the two HARTING parts (09032646852 and 09032646862)? A: Both parts are electrically and mechanically identical with matching specifications. They differ only in inventory availability and packaging (both Bulk). Either part is suitable for substitution.

Q: Can I use the 9-106203-1 (TE Connectivity) if current rating is not specified? A: The 9-106203-1 does not provide a current rating specification in the available data. For applications where the 3A current rating is critical, use the 208458096001026 (KYOCERA AVX) instead.